Dual DC current injection‐based stator winding temperature tracking for dual three‐phase permanent magnet synchronous machine using Kalman filter
暂无分享,去创建一个
Wenlong Li | Narayan C. Kar | Chunyan Lai | Guodong Feng | Jiangbo Tian | Ze Li | N. Kar | Chunyan Lai | G. Feng | Ze Li | Wenlong Li | Jiangbo Tian
[1] Michel Hecquet,et al. Multiphysics Modeling of a Permanent Magnet Synchronous Machine by Using Lumped Models , 2012, IEEE Transactions on Industrial Electronics.
[2] Hyun-Soo Kim,et al. Nonlinearity estimation and compensation of PWM VSI for PMSM under resistance and flux linkage uncertainty , 2006, IEEE Transactions on Control Systems Technology.
[3] Alejandro G. Yepes,et al. Estimation Method of Stator Winding Resistance for Induction Motor Drives Based on DC-Signal Injection Suitable for Low Inertia , 2019, IEEE Transactions on Power Electronics.
[4] F. Briz,et al. Temperature Estimation in Inverter Fed Machines Using High Frequency Carrier Signal Injection , 2007, 2007 IEEE Industry Applications Annual Meeting.
[5] Jung-Pyo Hong,et al. Characteristics of IPMSM According to Rotor Design Considering Nonlinearity of Permanent Magnet , 2016, IEEE Transactions on Magnetics.
[6] Olli Pyrhonen,et al. Determination of the inductance parameters for the decoupled d-q model of double-star permanentmagnet synchronous machines , 2014 .
[7] Ying Wu,et al. Induction-motor stator and rotor winding temperature estimation using signal injection method , 2006, IEEE Transactions on Industry Applications.
[8] Kan Liu,et al. Identification of Flux Linkage Map of Permanent Magnet Synchronous Machines Under Uncertain Circuit Resistance and Inverter Nonlinearity , 2018, IEEE Transactions on Industrial Informatics.
[9] Jussi Karttunen,et al. Decoupled d-q Model of Double-Star Interior-Permanent-Magnet Synchronous Machines , 2013, IEEE Transactions on Industrial Electronics.
[10] M.J. Duran,et al. Lumped-parameter thermal model for induction machines , 2004, IEEE Transactions on Energy Conversion.
[11] Hyun-Soo Kim,et al. On-line dead-time compensation method based on time delay control , 2003, IEEE Trans. Control. Syst. Technol..
[12] S D Wilson,et al. Methods of Resistance Estimation in Permanent Magnet Synchronous Motors for Real-Time Thermal Management , 2010, IEEE Transactions on Energy Conversion.
[13] Yihua Hu,et al. Comprehensive Diagnosis and Tolerance Strategies for Electrical Faults and Sensor Faults in Dual Three-Phase PMSM Drives , 2019, IEEE Transactions on Power Electronics.
[14] Narayan C. Kar,et al. Current Injection-Based Online Parameter and VSI Nonlinearity Estimation for PMSM Drives Using Current and Voltage DC Components , 2016, IEEE Transactions on Transportation Electrification.
[15] H. Rothuizen,et al. 201 Gb/in2 Recording Areal Density on Sputtered Magnetic Tape , 2018, IEEE Transactions on Magnetics.
[16] Milijana Odavic,et al. Torque Capability Enhancement of Dual Three-Phase PMSM Drive With Fifth and Seventh Current Harmonics Injection , 2017, IEEE Transactions on Industry Applications.
[17] Kan Liu,et al. Current Control for Dual Three-Phase Permanent Magnet Synchronous Motors Accounting for Current Unbalance and Harmonics , 2014, IEEE Journal of Emerging and Selected Topics in Power Electronics.
[18] Shuang Zhao,et al. Thermal Analysis of a PMaSRM Using Partial FEA and Lumped Parameter Modeling , 2012, IEEE Transactions on Energy Conversion.
[19] Qingxin Yang,et al. Influence Factors Analysis and Improvement Method on Efficiency of Wireless Power Transfer Via Coupled Magnetic Resonance , 2014, IEEE Transactions on Magnetics.
[20] Darko P. Marcetic,et al. Thermal Protection of Vector-Controlled IM Drive Based on DC Current Injection , 2015, IEEE Transactions on Industrial Electronics.
[21] Joachim Bocker,et al. Global Identification of a Low-Order Lumped-Parameter Thermal Network for Permanent Magnet Synchronous Motors , 2016, IEEE Transactions on Energy Conversion.
[22] Milijana Odavic,et al. Comparison of Two-Individual Current Control and Vector Space Decomposition Control for Dual Three-Phase PMSM , 2017 .
[23] Narayan C. Kar,et al. Dual Three-Phase PMSM Torque Modeling and Maximum Torque per Peak Current Control Through Optimized Harmonic Current Injection , 2019, IEEE Transactions on Industrial Electronics.
[24] Jimi Tjong,et al. Noninvasive Kalman Filter Based Permanent Magnet Temperature Estimation for Permanent Magnet Synchronous Machines , 2018, IEEE Transactions on Power Electronics.
[25] Jesus Doval-Gandoy,et al. Estimation Method of Stator Winding Temperature for Dual Three-Phase Machines Based on DC-Signal Injection , 2016, IEEE Transactions on Power Electronics.