Aerosol particle deposition and distribution in bifurcating ventilation ducts.

The quantitative information gained from detailed studies of particle deposition in ducts is important, for example, to evaluate human exposure to particles within buildings, implement cleaning strategies for ventilation ducts and also understand particulate deposition in the respiratory tree. For this purpose, an experimental study for aerosol particles of diameters ranging from 8.1 to 23.2 microm was conducted in a curved bifurcating ventilation duct. At the bend segment of the duct, the particle size, bend angle, curvature ratio and Reynolds number affect aerosol deposition significantly. On the other hand, tests conducted on the bifurcating segments show that deposition increases with particle size and Reynolds number. Accumulation of particles occurs mainly around the bend segment and the ridge of carina of the bifurcation. In all segments of the duct models, particle deposition is found to be enhanced with increasing humidity which increases from 66 to 95% (i.e., close the saturation). A physical interpretation of the results obtained is also presented.

[1]  K. W. Cheong,et al.  Deposition of aerosol particles in ductwork , 1997 .

[2]  William W. Nazaroff,et al.  MODELING PARTICLE DEPOSITION IN VENTILATION DUCTS , 2002 .

[3]  Antonio F. Miguel,et al.  PARTICLE DEPOSITION IN AIRWAY BIFURCATIONS IN DIFFERENT BREATHING CONDITIONS , 2004 .

[4]  D. Fisher,et al.  PARTICLE DEPOSITION IN BIFURCATING AIRWAY MODELS WITH VARYING AIRWAY GEOMETRY , 1994 .

[5]  Andrew R. McFarland,et al.  Aerosol deposition in bends with turbulent flow , 1997 .

[6]  J. McLaughlin.  Aerosol particle deposition in numerically simulated channel flow , 1989 .

[7]  S K Kjaergaard,et al.  Effects in the eyes caused by exposure to office dust. , 2002, Indoor air.

[8]  A J Gadgil,et al.  Hygroscopic fine mode particle deposition on electronic circuits and resulting degradation of circuit performance: an experimental study. , 2000, Indoor air.

[9]  R. Sarangapani.  Modeling Particle Deposition in Extrathoracic Airways , 2000 .

[10]  Andrew R. McFarland,et al.  Turbulent deposition of aerosol particles in large transport tubes , 1996 .

[11]  X Y Luo,et al.  LES modelling of flow in a simple airway model. , 2004, Medical engineering & physics.

[12]  An approach for evaluating aerosol particle deposition from a natural convection flow onto a vertical flat plate. , 1999, Journal of hazardous materials.

[13]  T. L. Montgomery,et al.  Aerosol deposition in a pipe with turbulent airflow , 1970 .

[14]  Antonio F. Miguel,et al.  Contribution to flow characterisation through porous media , 2000 .

[15]  Benjamin Y. H. Liu,et al.  Experimental Study of Particle Deposition in Bends of Circular Cross Section , 1987 .

[16]  A. H. Reis,et al.  Constructal theory of flow architecture of the lungs. , 2004, Medical physics.

[17]  L. Talbot,et al.  Flow in Curved Pipes , 1983 .

[18]  Goodarz Ahmadi,et al.  Experimental investigation of dust particle deposition in a turbulent channel flow , 1993 .

[19]  D. Pui,et al.  Numerical study of particle deposition in bends of a circular cross-section-laminar flow regime , 1990 .

[20]  C. R. Ethier,et al.  Steady flow separation patterns in a 45 degree junction , 2000, Journal of Fluid Mechanics.

[21]  Saffa Riffat,et al.  Aerosol deposition in ventilation ducts , 1996 .

[22]  K. Sandeep,et al.  Effect of tube curvature ratio on the residence time distribution of multiple particles in helical tubes , 2004 .

[23]  William J. Fisk,et al.  Sealing ducts in large commercial buildings with aerosolized sealant particles , 2002 .

[24]  C. E. Smeltzer,et al.  Mechanisms of Metal Removal by Impacting Dust Particles , 1970 .

[25]  Alvin C.K. Lai,et al.  Enhanced particle loss in ventilation duct with ribbed surface , 2000 .

[26]  K. Spurny,et al.  Advances in aerosol filtration , 1998 .

[27]  Ibrahim Dincer,et al.  Porous and Complex Flow Structures in Modern Technologies , 2004 .

[28]  A. Montanaro,et al.  Indoor air pollution and health , 1997 .

[29]  Antonio F. Miguel,et al.  Effect of air humidity on the evolution of permeability and performance of a fibrous filter during loading with hygroscopic and non-hygroscopic particles , 2003 .