Improvement of unidirectional focusing periodic permanent magnet shear-horizontal wave electromagnetic acoustic transducer by oblique bias magnetic field

Abstract We propose a new unidirectional point focusing shear horizontal (SH) guided wave electromagnetic ultrasonic transducer (EMAT) with an angled periodic permanent magnet (PPM) in this work. The angled PPM developed here provides an angled bias magnetic field to achieve the EMAT’s unidirectional focusing capability. The characteristics of the magnetic field distribution are analyzed by numerical and theoretical calculations. The simulation and experimental results are proven to be in good agreement when studying the bidirectional normalized amplitudes of the displacement of the single-coil SH-guided EMAT with oblique permanent magnets. Both the proposed angled transducer structure and the traditional paralleled transducer structure are performed and simulated using the three-dimensional Finite Element Method (FEM) to compare their unidirectional focusing capabilities. The results show that the SH guided wave EMAT of the focusing coils with an oblique permanent magnet enhances the signal on the focusing side and weakens the signal on the other side effectively. This performance can suppress the influence of the reflected signal from the unfocused side and further improve the ultrasonic signal’s resolution. Moreover, it is shown in the study that increasing the oblique angle of the PPM makes it difficult to increase the signal strength at the focal point when the angle reaches a certain value, but it is still effective at weakening the signal on the unfocused side.

[1]  Zhenmao Chen,et al.  A modified meander-line-coil EMAT design for signal amplitude enhancement , 2016 .

[2]  P A Petcher,et al.  Shear horizontal (SH) ultrasound wave propagation around smooth corners. , 2014, Ultrasonics.

[3]  Rachel S. Edwards,et al.  Multi-coil focused EMAT for characterisation of surface-breaking defects of arbitrary orientation , 2017 .

[4]  Daniel Massicotte,et al.  Neural classification of Lamb wave ultrasonic weld testing signals using wavelet coefficients , 2001, IEEE Trans. Instrum. Meas..

[5]  Steve Dixon,et al.  Frequency dependent directivity of periodic permanent magnet electromagnetic acoustic transducers , 2014 .

[6]  Zhang Yu,et al.  Direction-Controllable Electromagnetic Acoustic Transducer for SH Waves in Steel Plate Based on Magnetostriction , 2016 .

[7]  Shen Wang,et al.  Multiphysics Modeling of a Lorentz Force-Based Meander Coil Electromagnetic Acoustic Transducer via Steady-State and Transient Analyses , 2016, IEEE Sensors Journal.

[8]  Rachel S. Edwards,et al.  Focused Rayleigh wave EMAT for characterisation of surface-breaking defects , 2016 .

[9]  Steve Dixon,et al.  Weld defect detection using PPM EMAT generated shear horizontal ultrasound , 2015 .

[10]  Shen Wang,et al.  Magnetostriction-Based Omni-Directional Guided Wave Transducer for High-Accuracy Tomography of Steel Plate Defects , 2015, IEEE Sensors Journal.

[11]  R. B. Thompson Generation of horizontally polarized shear waves in ferromagnetic materials using magnetostrictively coupled meander‐coil electromagnetic transducers , 1979 .

[12]  Chao Zhang,et al.  Enhancement of ultrasonic signal using a new design of Rayleigh-wave electromagnetic acoustic transducer , 2017 .

[13]  Daniel Massicotte,et al.  Wavelet-transform-based method of analysis for Lamb-wave ultrasonic NDE signals , 2000, IEEE Trans. Instrum. Meas..

[14]  José Sérgio da Rocha Neto,et al.  Development of Circuits for Excitation and Reception in Ultrasonic Transducers for Generation of Guided Waves in Hollow Cylinders for Fouling Detection , 2005, 2005 IEEE Instrumentationand Measurement Technology Conference Proceedings.

[15]  Gongzhe Qiu,et al.  Optimization of a Focusable and Rotatable Shear-Wave Periodic Permanent Magnet Electromagnetic Acoustic Transducers for Plates Inspection , 2017, Sensors.

[16]  Nurmalia,et al.  Detection of Shear Horizontal Guided Waves Propagating in Aluminum Plate with Thinning Region , 2011 .

[17]  Kenneth T. V. Grattan,et al.  Electromagnetic acoustic transducers for in- and out-of plane ultrasonic wave detection , 2008 .

[18]  Ke Xu,et al.  Enhancement of EMAT’s efficiency by using silicon steel laminations back-plate , 2018 .

[19]  Hirotsugu Ogi,et al.  Increase of Efficiency of Magnetostriction SH-Wave Electromagnetic Acoustic Transducer by Angled Bias Field: Piezomagnetic Theory and Measurement , 2003 .

[20]  Hirotsugu Ogi,et al.  Inspection of stress corrosion cracking in welded stainless steel pipe using point-focusing electromagnetic-acoustic transducer , 2016 .

[21]  Peter Cawley,et al.  Study and comparison of different EMAT configurations for SH wave inspection , 2011, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[22]  Zhenmao Chen,et al.  Development of a flexible film electromagnetic acoustic transducer for nondestructive testing , 2017 .

[23]  J. Rose,et al.  Guided circumferential shear horizontal waves in an isotropic hollow cylinder , 2004 .

[24]  Krishnan Balasubramaniam,et al.  A hybrid finite element model for simulation of electromagnetic acoustic transducer (EMAT) based plate waves , 2010 .

[25]  K. Grattan,et al.  A model for pulsed Rayleigh wave and optimal EMAT design , 2006 .

[26]  Hong Min Seung,et al.  An omnidirectional shear-horizontal guided wave EMAT for a metallic plate. , 2016, Ultrasonics.

[27]  Wei Zhao,et al.  Study on the Lift-off Effect of EMAT , 2009 .