Surface area expansion of electrodes with grass-like nanostructures and gold nanoparticles to enhance electricity generation in microbial fuel cells.

Microbial fuel cells (MFCs) have applications possibilities for wastewater treatment, biotransformation, and biosensor, but the development of highly efficient electrode materials is critical for enhancing the power generation. Two types of electrodes modified with nanoparticles or grass-like nanostructure (termed nanograss) were used. A two-chamber MFC with plain silicium electrodes achieved a maximum power density of 0.002mW/m(2), while an electrode with nanograss of titanium and gold deposited on one side gave a maximum power density of 2.5mW/m(2). Deposition of titanium and gold on both sides of plain silicium showed a maximum power density of 86.0mW/m(2). Further expanding the surface area of carbon-paper electrodes with gold nanoparticles resulted in a maximum stable power density of 346.9mW/m(2) which is 2.9 times higher than that achieved with conventional carbon-paper. These results show that fabrication of electrodes with nanograss could be an efficient way to increase the power generation.

[1]  Bruce E Logan,et al.  Sustainable and efficient biohydrogen production via electrohydrogenesis , 2007, Proceedings of the National Academy of Sciences.

[2]  Irini Angelidaki,et al.  Electricity generation and microbial community response to substrate changes in microbial fuel cell. , 2011, Bioresource technology.

[3]  M. Yun,et al.  Carbon Nanotube/Platinum(Pt)Sheet as an Improved Cathode for Microbial Fuel Cells , 2010 .

[4]  Peng Liang,et al.  Carbon nanotube powders as electrode modifier to enhance the activity of anodic biofilm in microbial fuel cells. , 2011, Biosensors & bioelectronics.

[5]  Bruce E. Logan,et al.  Increased performance of single-chamber microbial fuel cells using an improved cathode structure , 2006 .

[6]  K. Rabaey,et al.  Microbial electrosynthesis — revisiting the electrical route for microbial production , 2010, Nature Reviews Microbiology.

[7]  Microbial Fuel Cells for Wastewater Treatment , 2008 .

[8]  H. Beneking,et al.  RIE etching of deep trenches in Si using CBrF 3 and SF 6 plasma , 1987 .

[9]  Miko Elwenspoek,et al.  The black silicon method: a universal method for determining the parameter setting of a fluorine-based reactive ion etcher in deep silicon trench etching with profile control , 1995 .

[10]  Srikanth Ravipati,et al.  Plasma-made silicon nanograss and related nanostructures , 2011 .

[11]  Zhiguo Yuan,et al.  Simultaneous nitrification, denitrification and carbon removal in microbial fuel cells. , 2010, Water research.

[12]  B. Min,et al.  Generation of Electricity and Analysis of Microbial Communities in Wheat Straw Biomass-Powered Microbial Fuel Cells , 2009, Applied and Environmental Microbiology.

[13]  K. Mogensen,et al.  Simple Approach to Superamphiphobic Overhanging Silicon Nanostructures , 2010 .

[14]  Hong Liu,et al.  Nanoparticle decorated anodes for enhanced current generation in microbial electrochemical cells. , 2011, Biosensors & bioelectronics.

[15]  C. Alcock.  Thermochemical Processes: Principles and Models , 2000 .

[16]  Bruce E. Logan,et al.  Microbial Fuel Cells , 2006 .

[17]  Irini Angelidaki,et al.  Innovative microbial fuel cell for electricity production from anaerobic reactors , 2008 .

[18]  Stefano Freguia,et al.  Microbial fuel cells: methodology and technology. , 2006, Environmental science & technology.

[19]  Irini Angelidaki,et al.  Submersible microbial fuel cell sensor for monitoring microbial activity and BOD in groundwater: Focusing on impact of anodic biofilm on sensor applicability , 2011, Biotechnology and bioengineering.

[20]  Plamen Atanassov,et al.  Fabrication of macroporous chitosan scaffolds doped with carbon nanotubes and their characterization in microbial fuel cell operation. , 2011, Enzyme and microbial technology.

[21]  Duu-Jong Lee,et al.  Micro-sized microbial fuel cell: a mini-review. , 2011, Bioresource technology.

[22]  Bao-Lian Su,et al.  Immobilization technology: a sustainable solution for biofuel cell design , 2012 .

[23]  Willy Verstraete,et al.  Tubular microbial fuel cells for efficient electricity generation. , 2005, Environmental science & technology.

[24]  Hung-Yin Tsai,et al.  Microbial fuel cell performance of multiwall carbon nanotubes on carbon cloth as electrodes , 2009 .

[25]  Bruce E Logan,et al.  Cathode performance as a factor in electricity generation in microbial fuel cells. , 2004, Environmental science & technology.

[26]  Hong Liu,et al.  Power densities using different cathode catalysts (Pt and CoTMPP) and polymer binders (nafion and PTFE) in single chamber microbial fuel cells. , 2006, Environmental science & technology.

[27]  Keith Scott,et al.  On the dynamic response of the anode in microbial fuel cells. , 2011, Enzyme and microbial technology.

[28]  M. Madou.  Fundamentals of microfabrication , 1997 .

[29]  B. Min,et al.  Electricity generation using membrane and salt bridge microbial fuel cells. , 2005, Water research.

[30]  K. Xiao,et al.  A new method for water desalination using microbial desalination cells. , 2009, Environmental science & technology.