Intermediate decomposition of metastable Cu5Zn8 phase in the soldered Sn–Ag–Zn/Cu interface

Abstract The structural evolution process of the soldered interface between Sn–3.7%Ag–0.9%Zn lead-free solder and Cu substrate with different soldering time (less than 10 min) was explored by microstructural observations. It is found that a metastable Cu5Sn8 intermetallic compounds (IMCs) layer was firstly separated out close to the Cu substrate, then a stable Cu6Sn5 layer formed above it, as a result of the decomposition of the metastable Cu5Sn8 layer. It is proved that the existence of an intermediate decomposition of metastable Cu5Sn8 layer in the evolution of the soldered interface slightly accelerates the diffusion of Sn atoms in the formed Cu6Sn5 IMCs layer.

[1]  Ikuo Shohji,et al.  Tensile properties of Sn–Ag based lead-free solders and strain rate sensitivity , 2004 .

[2]  Tao-Chih Chang,et al.  Formation and morphology of the intermetallic compounds formed at the 91Sn–8.55Zn–0.45Al lead-free solder alloy/Cu interface , 2005 .

[3]  Min-Hsiung Hon,et al.  Enhancement of the wettability and solder joint reliability at the Sn–9Zn–0.5Ag lead-free solder alloy–Cu interface by Ag precoating , 2003 .

[4]  H. Flandorfer,et al.  Calorimetric investigations of the two ternary systems Al–Sn–Zn and Ag–Sn–Zn , 2005 .

[5]  Hwa-Teng Lee,et al.  Influence of intermetallic compounds on the adhesive strength of solder joints , 2002 .

[6]  Y. C. Chan,et al.  Comparative study of interfacial reactions of Sn-Ag-Cu and Sn-Ag solders on Cu pads during reflow soldering , 2005 .

[7]  Hwa-Teng Lee,et al.  Adhesive strength and tensile fracture of Ni particle enhanced Sn–Ag composite solder joints ☆ , 2006 .

[8]  Kwang-Lung Lin,et al.  Mechanical strength of Sn-3.5Ag-based solders and related bondings , 2004 .

[9]  S. Wang,et al.  Study of interaction between Cu-Sn and Ni-Sn interfacial reactions by Ni-Sn3.5Ag-Cu sandwich structure , 2003 .

[10]  Sungho Jin,et al.  New, lead-free solders , 1994 .

[11]  Hyuck-Mo Lee,et al.  Interfacial Microstructure and Joint Strength of Sn–3.5Ag–X (X = Cu, In, Ni) Solder Joint , 2002 .

[12]  Le Luo,et al.  Microstructure and shear strength evolution of SnAg/Cu surface mount solder joint during aging , 2001 .

[13]  Min-Hsiung Hon,et al.  Intermetallic compounds formation and interfacial adhesion strength of Sn–9Zn–0.5Ag solder alloy hot-dipped on Cu substrate , 2003 .

[14]  A. Fix,et al.  Microstructural development of Sn-Ag-Cu solder joints , 2005 .

[15]  M. Otsuka,et al.  Mechanical fatigue characteristics of Sn-3.5Ag-X (X=Bi, Cu, Zn and In) solder alloys , 1998 .

[16]  C. L. Lin,et al.  The reliability study of selected Sn-Zn based lead-free solders on Au/Ni-P/Cu substrate , 2003, Microelectron. Reliab..

[17]  K. N. Subramanian,et al.  Characterization of the growth of intermetallic interfacial layers of Sn-Ag and Sn-Pb eutectic solders and their composite solders on Cu substrate during isothermal long-term aging , 1999 .

[18]  Y. Amamoto,et al.  Microstructure of solder joints with electronic components in lead‐free solders , 1998 .

[19]  Russell F. Pinizzotto,et al.  The formation and growth of intermetallics in composite solder , 1993 .

[20]  Y. C. Chan,et al.  Effect of volume in interfacial reaction between eutectic Sn-3.5% Ag-0.5% Cu solder and Cu metallization in microelectronic packaging , 2005 .