Grouping schemes of welding fume exposure in shipyard welders

ABSTRACT Welding fume exposure can increase the risk of chronic obstructive pulmonary disease (COPD). The aim of this study was to evaluate the optimal grouping schemes of welding fume exposure in shipyard welders for future accurate examination of the association between welding fume exposure and COPD. Industrial hygiene records, including welding fume measurements between 2002 and 2009 were collected from a shipyard. A total of 2,360 personal welding fume measurements was compiled with a geometric mean of 1.66 mg/m3 and a geometric standard deviation of 4.02. Welding jobs were categorized into 8 groups. There were 9 working areas. To obtain the optimal grouping scheme, various grouping schemes were created using job, area, and job*area combination. To compare various grouping schemes, contrast and precision were calculated for each grouping scheme. For all measurement data, group mean ranking method created by ranking geometric means of the job*area combination into 3 groups (group mean ranking method) showed the best contrast and precision values among various grouping schemes, followed by grouping based on the job. For a subset of the data excluding job*area combinations with less than 10 measurements, grouping based on the job showed greater contrast than group mean ranking method, while for other subsets, including only repeated measurement data or further excluding job*area combinations with less than 10 measurements from the repeated measurement subset, group mean ranking method showed greater contrast than grouping based on the job. Our results showed that group mean ranking or grouping based on the job could be a candidate for the optimal grouping schemes in this shipyard. Our efforts for optimal grouping scheme may aid future cohort study to elucidate the association between welding fume exposure and COPD.

[1]  Markus Berges,et al.  Exposure to Inhalable, Respirable, and Ultrafine Particles in Welding Fume , 2012, The Annals of occupational hygiene.

[2]  Tomás R. Guilarte,et al.  Manganese and Parkinson’s Disease: A Critical Review and New Findings , 2010, Environmental health perspectives.

[3]  D. Koh,et al.  Welding fume exposure and chronic obstructive pulmonary disease in welders. , 2015, Occupational medicine.

[4]  Ken Donaldson,et al.  Soluble transition metals cause the pro-inflammatory effects of welding fumes in vitro. , 2004, Toxicology and applied pharmacology.

[5]  J. Wedzicha,et al.  Global Strategy for the Diagnosis, Management, and Prevention of Chronic Obstructive Lung Disease 2017 Report: GOLD Executive Summary , 2017 .

[6]  Hans Kromhout,et al.  Sensitivity of the Relation between Cumulative Magnetic Field Exposure and Brain Cancer Mortality to Choice of Monitoring Data Grouping Scheme , 1997, Epidemiology.

[7]  D. Richardson,et al.  Bias in the estimation of exposure effects with individual- or group-based exposure assessment , 2011, Journal of Exposure Science and Environmental Epidemiology.

[8]  H Kromhout,et al.  Grouping strategies for exposure to inhalable dust, wheat allergens and alpha-amylase allergens in bakeries. , 1997, The Annals of occupational hygiene.

[9]  M. Flynn,et al.  Local exhaust ventilation for the control of welding fumes in the construction industry--a literature review. , 2012, The Annals of occupational hygiene.

[10]  M Pankratz.  Welding safety. , 1999, Occupational health & safety.

[11]  I. Beverland,et al.  Soluble transition metals in welding fumes cause inflammation via activation of NF-kappaB and AP-1. , 2005, Toxicology letters.

[12]  D. Heederik,et al.  Characterization of dust exposure for the study of chronic occupational lung disease: a comparison of different exposure assessment strategies. , 2000, American journal of epidemiology.

[13]  Ki Moon Bang,et al.  Association between chronic obstructive pulmonary disease and employment by industry and occupation in the US population: a study of data from the Third National Health and Nutrition Examination Survey. , 2002, American journal of epidemiology.

[14]  Hans Kromhout,et al.  Trends in inhalation exposure--a review of the data in the published scientific literature. , 2007, The Annals of occupational hygiene.

[15]  S. Rappaport,et al.  Statistical modeling to determine sources of variability in exposures to welding fumes. , 2011, The Annals of occupational hygiene.

[16]  John R. Balmes,et al.  Assessing Exposures to Particulate Matter and Manganese in Welding Fumes , 2010 .

[17]  Karen Muller,et al.  Carcinogenicity of welding, molybdenum trioxide, and indium tin oxide. , 2017, The Lancet. Oncology.

[18]  M J Doherty,et al.  Total body iron overload in welder's siderosis. , 2004, Occupational and environmental medicine.

[19]  N. Paik,et al.  A comparison of iron oxide fume inside and outside of welding helmets. , 1985, American Industrial Hygiene Association journal.

[20]  M J Nieuwenhuijsen,et al.  Exposure assessment in occupational epidemiology: measuring present exposures with an example of a study of occupational asthma , 1997, International archives of occupational and environmental health.

[21]  Kathleen Kreiss,et al.  American Thoracic Society Statement: Occupational contribution to the burden of airway disease. , 2003, American journal of respiratory and critical care medicine.

[22]  Alex Burdorf.  Analysis and modelling of personal exposure , 2003 .

[23]  J. Luo,et al.  Pulmonary function abnormalities and airway irritation symptoms of metal fumes exposure on automobile spot welders. , 2006, American journal of industrial medicine.

[24]  J. Wedzicha,et al.  Global Strategy for the Diagnosis, Management, and Prevention of Chronic Obstructive Lung Disease 2017 Report: GOLD Executive Summary. , 2017, Archivos de bronconeumologia.

[25]  D. Bates,et al.  Fitting Linear Mixed-Effects Models Using lme4 , 2014, 1406.5823.

[26]  R Core Team,et al.  R: A language and environment for statistical computing. , 2014 .

[27]  Kurt Straif,et al.  A review of human carcinogens--Part C: metals, arsenic, dusts, and fibres. , 2009, The Lancet. Oncology.

[28]  Jenny R. Roberts,et al.  Pulmonary Responses to Welding Fumes: Role of Metal Constituents , 2004, Journal of toxicology and environmental health. Part A.

[29]  Diane Schwegler-Berry,et al.  Comparative Microscopic Study of Human and Rat Lungs after Exposure to Welding Fume , 2013, The Annals of occupational hygiene.

[30]  Roseanne McNamee,et al.  Instrumental Variables vs. Grouping Approach for Reducing Bias Due to Measurement Error , 2008, The international journal of biostatistics.

[31]  Donguk Park,et al.  Comparison of Grouping Schemes for Exposure to Total Dust in Cement Factories in Korea. , 2015, The Annals of occupational hygiene.

[32]  D. Gompertz,et al.  CADMIUM FUME INHALATION AND EMPHYSEMA , 1988, The Lancet.

[33]  Jung-Il Choi,et al.  Mathematical Analysis of Particle Deposition in Human Lungs: An Improved Single Path Transport Model , 2007, Inhalation toxicology.

[34]  H. R. Castner,et al.  Chromium, nickel and manganese in shipyard welding fumes , 1998 .

[35]  Paul Hewett.  Sample Size Formulae for Estimating the True Arithmetic or Geometric Mean of Lognormal Exposure Distributions , 1995 .

[36]  H Kromhout,et al.  Efficiency of different grouping schemes for dust exposure in the European carbon black respiratory morbidity study. , 1997, Occupational and environmental medicine.

[37]  L. Kupper,et al.  Comprehensive evaluation of long-term trends in occupational exposure: Part 1. Description of the database. , 1998, Occupational and environmental medicine.

[38]  E L Alpaugh,et al.  Ventilation requirements for gas-metal-arc welding versus covered-electrode welding. , 1968, American Industrial Hygiene Association journal.

[39]  Pam Susi,et al.  Manganese, Iron, and Total Particulate Exposures to Welders , 2009, Journal of occupational and environmental hygiene.

[40]  R Merget,et al.  Effects of Exposure to Welding Fume on Lung Function: Results from the German WELDOX Study. , 2015, Advances in experimental medicine and biology.

[41]  H. Kromhout,et al.  Occupational epidemiology in the rubber industry: implications of exposure variability. , 1995, American journal of industrial medicine.

[42]  Axel Skytthe,et al.  Risk of lung cancer according to mild steel and stainless steel welding. , 2007, Scandinavian journal of work, environment & health.

[43]  F Merlo,et al.  Effects of smoking and occupational exposures on pulmonary function impairment in Italian shipyard workers. , 1993, La Medicina del lavoro.

[44]  H Kromhout,et al.  Assessment and grouping of occupational magnetic field exposure in five electric utility companies. , 1995, Scandinavian journal of work, environment & health.

[45]  P. Blanc,et al.  Welding helmet airborne fume concentrations compared to personal breathing zone sampling. , 1995, American Industrial Hygiene Association journal.

[46]  H Kromhout,et al.  Historical limitations of determinant based exposure groupings in the rubber manufacturing industry , 2005, Occupational and Environmental Medicine.