On-Off Noise Power Communication

We design and build a protocol called on-off noise power communication (ONPC), which modifies the software in commodity packet radios to allow communication, independent of their standard protocol, at a very slow rate at long range. To achieve this long range, we use the transmitter as an RF power source that can be on or off if it does or does not send a packet, respectively, and a receiver that repeatedly measures the noise and interference power level. We use spread spectrum techniques on top of the basic on/off mechanism to overcome the interference caused by other devices' channel access to provide long ranges at a much lower data rate. We implement the protocol on top of commodity WiFi hardware. We discuss our design and how we overcome key challenges such as non-stationary interference, carrier sensing and hardware timing delays. We test ONPC in several situations to show that it achieves significantly longer range than standard WiFi.

[1]  Mahmood A. Abdulsattar.  Energy Detection Technique for Spectrum Sensing in Cognitive Radio: A Survey , 2012 .

[2]  Kamin Whitehouse,et al.  The hitchhiker's guide to successful residential sensing deployments , 2011, SenSys.

[3]  Dipak Ghosal,et al.  A Covert Timing Channel Based on Fountain Codes , 2012, 2012 IEEE 11th International Conference on Trust, Security and Privacy in Computing and Communications.

[4]  Zhijun Li,et al.  BlueBee: a 10,000x Faster Cross-Technology Communication via PHY Emulation , 2017, SenSys.

[5]  Joshua R. Smith,et al.  Wi-fi backscatter , 2014, SIGCOMM 2015.

[6]  Ratul Mahajan,et al.  Wi-Fi Networks are Underutilized , 2009 .

[7]  Danijela Cabric,et al.  Experimental study of spectrum sensing based on energy detection and network cooperation , 2006, TAPAS '06.

[8]  Dhanesh Raj,et al.  Performance measurement and analysis of long range Wi-Fi network for over-the-sea communication , 2015, 2015 13th International Symposium on Modeling and Optimization in Mobile, Ad Hoc, and Wireless Networks (WiOpt).

[9]  Guang Gong,et al.  Signal Design for Good Correlation: For Wireless Communication, Cryptography, and Radar , 2005 .

[10]  Raheem A. Beyah,et al.  Covert DCF: A DCF-Based Covert Timing Channel in 802.11 Networks , 2011, 2011 IEEE Eighth International Conference on Mobile Ad-Hoc and Sensor Systems.

[11]  Mansi S. Subhedar,et al.  SPECTRUM SENSING TECHNIQUES IN COGNITIVE RADIO NETWORKS : A SURVEY , 2011 .

[12]  Kameswari Chebrolu,et al.  Long-distance 802.11b links: performance measurements and experience , 2006, MobiCom '06.

[13]  Timothy O'Farrell,et al.  Spread spectrum techniques for indoor wireless IR communications , 2003, IEEE Wirel. Commun..

[14]  Z. Trabelsi,et al.  Implementation of a Covert Channel in the 802.11 Header , 2008, 2008 International Wireless Communications and Mobile Computing Conference.

[15]  Matthias Hollick,et al.  Shadow Wi-Fi: Teaching Smartphones to Transmit Raw Signals and to Extract Channel State Information to Implement Practical Covert Channels over Wi-Fi , 2018, MobiSys.

[16]  Ignas G. Niemegeers,et al.  IEEE 802.11ah: Advantages in standards and further challenges for sub 1 GHz Wi-Fi , 2012, 2012 IEEE International Conference on Communications (ICC).

[17]  Jong-Hoon Youn,et al.  Adaptive radio channel allocation for supporting coexistence of 802.15.4 and 802.11b , 2005, VTC-2005-Fall. 2005 IEEE 62nd Vehicular Technology Conference, 2005..

[18]  Raheem A. Beyah,et al.  An 802.11 MAC layer covert channel , 2012, Wirel. Commun. Mob. Comput..

[19]  Santosh Pandey,et al.  IEEE 802.11af: a standard for TV white space spectrum sharing , 2013, IEEE Communications Magazine.

[20]  Marco Zennaro,et al.  On a long wireless link for rural telemedicine in Malawi , 2008 .

[21]  Chi Zhou,et al.  Frequency agility in a ZigBee network for smart grid application , 2010, 2010 Innovative Smart Grid Technologies (ISGT).