A Chopper Current-Feedback Instrumentation Amplifier With a 1 mHz $1/f$ Noise Corner and an AC-Coupled Ripple Reduction Loop

This paper presents a chopper instrumentation amplifier for interfacing precision thermistor bridges. For high CMRR and DC gain, the amplifier employs a three-stage current-feedback topology with nested-Miller compensation. By chopping both the input and intermediate stages of the amplifier, a 1 mHz 1/f noise corner was achieved at an input-referred noise power spectral density (PSD) of 15 nV/¿Hz. To reduce chopper ripple, the amplifier employs a continuous-time AC-coupled ripple reduction loop. Due to its continuous-time nature, the loop causes no noise folding to DC and hence offers improved noise performance over auto-zeroed amplifiers. The loop reduces chopper ripple by more than 60 dB, to levels below the amplifier's own input-referred noise. Furthermore, a maximum input referred offset of 5 ¿ V and a CMRR greater than 120 dB were measured at a supply current of 230 ¿A at 5 V.

[1]  M. Kejariwal,et al.  A 250+dB open loop gain feedforward compensated high precision operational amplifier , 2002, Proceedings of the 28th European Solid-State Circuits Conference.

[2]  G. Erdi.  Amplifier techniques for combining low noise, precision, and high-speed performance , 1981, IEEE Journal of Solid-State Circuits.

[3]  Wilko J. Kindt,et al.  A 140 dB-CMRR Current-Feedback Instrumentation Amplifier Employing Ping-Pong Auto-Zeroing and Chopping , 2010, IEEE Journal of Solid-State Circuits.

[4]  Refet Firat Yazicioglu,et al.  A 200μW Eight-Channel Acquisition ASIC for Ambulatory EEG Systems , 2008, 2008 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[5]  A.T.K. Tang.  A 3 /spl mu/V-offset operational amplifier with 20 nV//spl radic/Hz input noise PSD at DC employing both chopping and autozeroing , 2002, 2002 IEEE International Solid-State Circuits Conference. Digest of Technical Papers (Cat. No.02CH37315).

[6]  Johan H. Huijsing,et al.  Indirect Current Feedback Instrumentation Amplifier with a Common Mode Input Range That Includes the Negative Rail , 1992 .

[7]  R. Burt,et al.  A Micropower Chopper-Stabilized Operational Amplifier using a SC Notch Filter with Synchronous Integration inside the ContinuousTime Signal Path , 2006, 2006 IEEE International Solid State Circuits Conference - Digest of Technical Papers.

[8]  J.H. Huijsing,et al.  A CMOS chopper opamp with integrated low-pass filter , 1997, Proceedings of the 23rd European Solid-State Circuits Conference.

[9]  Johan H. Huijsing,et al.  Operational Amplifiers - Theory and Design , 2000 .

[10]  K. Consoer,et al.  A 2.2μW 94nV/√Hz, Chopper-Stabilized Instrumentation Amplifier for EEG Detection in Chronic Implants. , 2007 .

[11]  R. R. Harrison,et al.  A low-power low-noise CMOS amplifier for neural recording applications , 2003, IEEE J. Solid State Circuits.

[12]  R. Burt,et al.  A Micropower Chopper-Stabilized Operational Amplifier Using a SC Notch Filter With Synchronous Integration Inside the Continuous-Time Signal Path , 2006, IEEE Journal of Solid-State Circuits.

[13]  Refet Firat Yazicioglu,et al.  A 200 $\mu$ W Eight-Channel EEG Acquisition ASIC for Ambulatory EEG Systems , 2008, IEEE Journal of Solid-State Circuits.

[14]  Timothy Denison,et al.  A 2.2/spl mu/W 94nV//spl radic/Hz, Chopper-Stabilized Instrumentation Amplifier for EEG Detection in Chronic Implants , 2007, 2007 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[15]  K. Makinwa,et al.  A Current-Feedback Instrumentation Amplifier With 5 $\mu{\hbox{V}}$ Offset for Bidirectional High-Side Current-Sensing , 2008, IEEE Journal of Solid-State Circuits.

[16]  Kofi A. A. Makinwa,et al.  A Current-Feedback Instrumentation Amplifier with 5μV Offset for Bidirectional High-Side Current-Sensing , 2008, 2008 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[17]  A. Bilotti,et al.  Monolithic magnetic Hall sensor using dynamic quadrature offset cancellation , 1997, IEEE J. Solid State Circuits.

[18]  Andrew T. K. Tang.  A 3μV-offset operational amplifier with 20nV/*Hz input noise PSD at DC employing both chopping and autozeroing , 2002 .

[19]  Gabor C. Temes,et al.  Circuit techniques for reducing the effects of op-amp imperfections: autozeroing, correlated double sampling, and chopper stabilization , 1996, Proc. IEEE.

[20]  K. Kundert.  Simulating Switched-Capacitor Filters with SpectreRF , 2001 .

[21]  K.A.A. Makinwa,et al.  A temperature-to-digital converter based on an optimized electrothermal filter , 2008, ESSCIRC 2008 - 34th European Solid-State Circuits Conference.

[22]  Qiuting Huang,et al.  A 200 nV offset 6.5 nV//spl radic/Hz noise PSD 5.6 kHz chopper instrumentation amplifier in 1 /spl mu/m digital CMOS , 2001, 2001 IEEE International Solid-State Circuits Conference. Digest of Technical Papers. ISSCC (Cat. No.01CH37177).