An analytical model for axial crushing of a thin-walled cylindrical shell with a hollow foam core

Abstract A thin-walled tube filled with light-weighted foam has wide engineering applications because of its excellent energy absorption capacity. When the structure is axially crushed, the interaction between the tube and foam core plays an important role in its energy absorption performance. Previous theoretical studies so far have largely been concerned with fully in-filled tubes. In this paper, a theoretical model is proposed to predict the axi-symmetric crushing behaviour of such structures but with a partial infill. Using a modified model for shell and considering the volume reduction for the foam core, the mean crushing force is predicted by the energy balance. The proposed formula agrees well with previous results reported in literature. A parametric study is carried out to examine the contribution of foam core plateau stress ( σ f ), amount of filling and shell's radius-to-thickness ratio ( R / h ) on the axial crushing behaviour of the structure. This study can give valuable design guidelines in using thin-walled structures as an energy absorber.

[1]  O. Hopperstad,et al.  Aluminum foam-filled extrusions subjected to oblique loading: experimental and numerical study , 2004 .

[2]  W. Abramowicz,et al.  Axial crushing of foam-filled columns , 1988 .

[3]  S. Reid,et al.  Static and dynamic axial crushing of foam-filled sheet metal tubes , 1986 .

[4]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[5]  Norman Jones,et al.  Dynamic progressive buckling of circular and square tubes , 1986 .

[6]  O. Hopperstad,et al.  Static and dynamic crushing of square aluminium extrusions with aluminium foam filler , 2000 .

[7]  H. Kavi,et al.  Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient , 2006 .

[8]  Tomasz Wierzbicki,et al.  Crash behavior of box columns filled with aluminum honeycomb or foam , 1998 .

[9]  T. Wierzbicki,et al.  Relative merits of single-cell, multi-cell and foam-filled thin-walled structures in energy absorption , 2001 .

[10]  Tongxi Yu,et al.  Energy absorption of pressurized thin-walled circular tubes under axial crushing , 2009 .

[11]  Norman Jones,et al.  Dynamic axial crushing of circular tubes , 1984 .

[12]  F. Rammerstorfer,et al.  Experimental studies on the quasi-static axial crushing of steel columns filled with aluminium foam , 2000 .

[13]  Raphael H. Grzebieta,et al.  An alternative method for determining the behaviour of round stocky tubes subjected to an axial crush load , 1990 .

[14]  Lin Seng Ong,et al.  BUCKLING OF A THIN-WALLED CYLINDRICAL SHELL WITH FOAM CORE UNDER AXIAL COMPRESSION , 2011 .

[15]  M. Langseth,et al.  Static crushing of square aluminium extrusions with aluminium foam filler , 1999 .

[16]  N. Fleck,et al.  Isotropic constitutive models for metallic foams , 2000 .

[17]  F. Rammerstorfer,et al.  Crushing of axially compressed steel tubes filled with aluminium foam , 1997 .

[18]  Xiaodong Huang,et al.  Axisymmetric progressive crushing of circular tubes , 2003 .

[19]  W. Abramowicz,et al.  Alexander revisited—A two folding elements model of progressive crushing of tubes , 1992 .

[20]  G. Lu,et al.  Quasi-static axial compression of thin-walled circular aluminium tubes , 2001 .

[21]  T. Y. Reddy,et al.  Axial compression of foam-filled thin-walled circular tubes , 1988 .

[22]  T. Wierzbicki,et al.  Experimental and numerical studies of foam-filled sections , 2000 .