Development of Diaphragm-type Stylus Probe for Ultra-precision On-machine Measurement Application
暂无分享,去创建一个
The diaphragm-type stylus probe was developed for ultra-precision on-machine measurement (OMM) application. This probe is equipped with two diaphragms which are parallel and one capacitive sensor is used for detecting the vertical motion of end tip in the stylus when it is contacted to the optical freeform surface. For better performance of proposed probes, several design parameters such as axial stiffness and the lateral deformations were investigated with finite element analysis techniques. To verify the feasibility, the profiles of the master sphere ball were measured on the ultra-precision milling machine. The measurement results show that the proposed probe can calculate the radius of the circle within the accuracy of 0.1 for the ultraprecision optical surface.
[1] Byung-Kwon Min,et al. Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system , 2004 .
[2] Wei Gao,et al. Profile Measurements of Micro-aspheric Surfaces Using an Air-bearing Stylus with a Microprobe , 2007 .
[3] Young-bong Bang,et al. Fabrication of free-form surfaces using a long-stroke fast tool servo and corrective figuring with on-machine measurement , 2009 .