Software design of optical link for indoor wireless optical communication network used LEDs as source visible light communication

Nowadays, the conventional light sources are replaced progressively evolving LED (Light Emitting Diode) for their deficient properties. This technology recorded dynamic growth mainly due to effective research in increasing power density and choice the color shade on good color rendering CRI (Color Rendering Index). This extending the zone of used LEDs. Development of lighting technology by means of white power LEDs provided impulse to the idea of the development of optical wireless data networks based on optical radiation in the visible region of the spectrum VLC (Visible Light Communications). In the last years being recorded a turnover of research from transmission of information via optical fiber to the transmission of information through wireless networks. At the same time the concept of information transmission by indirect sight between transmitter and receiver NLOS (Non Line of Sight) is changing. Line of research focuses mainly on the direct line of sight LOS (Line of Sight). This is due to the development of the semiconductor lighting through the white power LED. This is connected with the idea of using them as a transmitter for communication purposes. This article deals with software design of optical link for indoor wireless optical network in LightTools software. Optimal optical source was designed for communication using LED as the first. For the proposed type of LEDs sources were used different shapes and distances distribution between LEDs in a single cell at the designed optical transmitter.