Enhancement of strength and flexibility of high-density polyethylene using rubber leaves

High density polyethylene (HDPE) polymer suffers with lack of strength and flexibility that result in fracture of vessels and leakage of piping system. One way to overcome the brittleness problem of the polymer is by reinforcement of fillers such as fibers into the polymer matrix to form a polymer composite. In this study, the effect of incorporating rubber leaves as the filler into high density polyethylene (HDPE) polymer matrix on the tensile properties and morphology of the polymer composite was investigated. The composites were prepared with or without addition of glycerol as plasticizer and citric acid as cross linker. Despite using a common size of the filler, the sieve sizes of the rubber leaves were varied at 200µm, 300µm and 500µm respectively. Results show that the presence of 200 µm rubber leaves with glycerol and citric acid increased the strength of the polymer composites, where the tensile strength achieves 22.1 MPa without jeopardizing the elongation of the composite. The image from SEM reveals that rubber leaves fibers and plasticizers are dispersed homogeneously in the polymer matrix HDPE. This potential used of rubber leaves in the manufacturing of HDPE polymer composites will help to utilize the abundant amount of rubber leaves.

[1]  N. Sarifuddin,et al.  THE EFFECTS OF GLYCEROL ADDITION TO THE MECHANICAL PROPERTIES OF THERMOPLASTIC FILMS BASED ON JACKFRUIT SEED STARCH , 2018, Malaysian Journal of Analytical Science.

[2]  I. Ahmad,et al.  EFFECTS OF FIBRE SIZE ON Sansevieria trifasciata/NATURAL RUBBER/ HIGH DENSITY POLYETHYLENE BIOCOMPOSITES , 2018 .

[3]  Jhon Jairo Feria Díaz,et al.  Characterization of Methylcellulose Based Hydrogels by Using Citric Acid as a Crosslinking Agent , 2018 .

[4]  G. Venkatachalam,et al.  Studies on Tensile Strength of Sugarcane Fiber Reinforced Hybrid Polymer Matrix Composite , 2018 .

[5]  A. Rashidi,et al.  Morphology-Property relationship of high density Polyethylene/Hevea Brasiliensis Leaves/Imperata cylindrica hybrid composite: Impact strength , 2017 .

[6]  K. Ismail NATURAL FIBER REINFORCED POLYMER COMPOSITES , 2017 .

[7]  Zaib Jahan,et al.  Influence of carboxylic acids on mechanical properties of thermoplastic starch by spray drying , 2017, Fibers and Polymers.

[8]  K. Cornish,et al.  High performance waste-derived filler/carbon black reinforced guayule natural rubber composites , 2016 .

[9]  V. Choudhary,et al.  High-density polyethylene/halloysite nanocomposites: morphology and rheological behaviour under extensional and shear flow , 2016, Journal of Polymer Research.

[10]  A. Thakare EXPERIMENTAL INVESTIGATION OF POSSIBLE USE OF HDPE AS THERMAL STORAGE MATERIAL IN THERMAL STORAGE TYPE SOLAR COOKERS , 2015 .

[11]  W. Brostow,et al.  Brittleness and toughness of polymers and other materials , 2015 .

[12]  M. L. Sanyang,et al.  Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (arenga pinnata) starch for food packaging , 2015, Journal of Food Science and Technology.

[13]  J. Halpern,et al.  A biodegradable thermoset polymer made by esterification of citric acid and glycerol. , 2014, Journal of biomedical materials research. Part A.

[14]  C. Ruksakulpiwat,et al.  Cogon Grass Fiber-Epoxidized Natural Rubber Composites , 2013 .

[15]  E. T. Thachil,et al.  Rice husk ash – A valuable reinforcement for high density polyethylene , 2012 .

[16]  W. Rahman,et al.  Comparison of rice husk-filled polyethylene composite and natural wood under weathering effects , 2011 .

[17]  W. Rahman,et al.  Effect of glycerol on performance rice straw/starch based polymer , 2011 .

[18]  W. Brostow,et al.  Brittleness of materials: implications for composites and a relation to impact strength , 2010, Journal of Materials Science.

[19]  Liqun Zhang,et al.  Characterization of citric acid/glycerol co-plasticized thermoplastic starch prepared by melt blending , 2007 .

[20]  H. Kwon,et al.  Toughness of High-Density Polyethylene in Plane-Strain Fracture , 2006 .

[21]  X. Sun,et al.  Low density particleboard from wheat straw and corn pith , 2002 .

[22]  J. Balatinecz,et al.  Creep fatigue in engineered wood fiber and plastic compositions , 2000 .

[23]  Dinabandhu Pramanick,et al.  Synthesis and biodegradation of copolyesters from citric acid and glycerol , 1988 .