Robust Geotechnical Design of Earth Slopes Using Fuzzy Sets

AbstractThis paper presents a fuzzy set–based robust geotechnical design (RGD) approach for the design of earth slopes in which uncertain soil parameters are represented as fuzzy sets. For a slope with fuzzy sets as inputs, the stability (factor of safety) of the slope is also a fuzzy set. The failure probability of the slope can readily be determined based on the obtained fuzzy factor of safety; further, the design robustness in terms of the signal-to-noise ratio (SNR) can also be evaluated. The purpose of the RGD is to derive a design that is robust against the uncertainty in the input parameters, with an explicit consideration on safety and cost. Therefore, a multiobjective optimization is performed and a three-dimensional or two-dimensional Pareto front showing a trade-off between objectives can be obtained, which allows for an informed design decision. The effectiveness of the proposed fuzzy set–based RGD approach is demonstrated through an illustrative example.

[1]  John T. Christian,et al.  Geotechnical Engineering Reliability: How Well Do We Know What We Are Doing? , 2004 .

[2]  A. Bishop.  The use of the Slip Circle in the Stability Analysis of Slopes , 1955 .

[3]  Kalyanmoy Deb,et al.  A fast and elitist multiobjective genetic algorithm: NSGA-II , 2002, IEEE Trans. Evol. Comput..

[4]  Hyuck-Jin Park,et al.  Application of fuzzy set theory to evaluate the probability of failure in rock slopes , 2012 .

[5]  C. H. Juang,et al.  Stability analysis of existing slopes considering uncertainty , 1998 .

[6]  Lei Wang,et al.  Robust geotechnical design of braced excavations in clays , 2014 .

[7]  Kalyanmoy Deb,et al.  Finding Knees in Multi-objective Optimization , 2004, PPSN.

[8]  G. R. Dodagoudar,et al.  RELIABILITY ANALYSIS OF SLOPES USING FUZZY SETS THEORY , 2000 .

[9]  Tien H. Wu,et al.  Reliability of Settlement Prediction—Case History , 2011 .

[10]  Shui-Long Shen,et al.  Jet grouting for mitigation of installation disturbance , 2014 .

[11]  Tien H. Wu,et al.  System reliability of slope stability , 1990 .

[12]  Bernhard Sendhoff,et al.  Robust Optimization - A Comprehensive Survey , 2007 .

[13]  Kok-Kwang Phoon,et al.  Efficient Evaluation of Reliability for Slopes with Circular Slip Surfaces Using Importance Sampling , 2009 .

[14]  A. Ramer.  Uniqueness of information measure in the theory of evidence , 1987 .

[15]  G. Baecher.  Reliability and Statistics in Geotechnical Engineering , 2003 .

[16]  David J. Elton,et al.  Modelling and analysis of non‐random uncertainties—fuzzy‐set approach , 1992 .

[17]  Jie Zhang,et al.  Robust geotechnical design of shield-driven tunnels , 2014 .

[18]  J. Y. Kim,et al.  An improved search strategy for the critical slip surface using finite element stress fields , 1997 .

[19]  J. M. Duncan,et al.  Factors of Safety and Reliability in Geotechnical Engineering , 2000 .

[20]  J. Christian,et al.  Reliability Applied to Slope Stability Analysis , 1994 .

[21]  V. R. Greco.  EFFICIENT MONTE CARLO TECHNIQUE FOR LOCATING CRITICAL SLIP SURFACE , 1996 .

[22]  K. Deb,et al.  Understanding knee points in bicriteria problems and their implications as preferred solution principles , 2011 .

[23]  Claudia Cherubini,et al.  Probabilistic and fuzzy reliability analysis of a sample slope near Aliano , 2003 .

[24]  Kwok-Leung Tsui,et al.  AN OVERVIEW OF TAGUCHI METHOD AND NEWLY DEVELOPED STATISTICAL METHODS FOR ROBUST DESIGN , 1992 .

[25]  D. V. Griffiths,et al.  SLOPE STABILITY ANALYSIS BY FINITE ELEMENTS , 1999 .

[26]  Lei Wang,et al.  Robust Geotechnical Design of Drilled Shafts in Sand: New Design Perspective , 2013 .

[27]  DebK.,et al.  A fast and elitist multiobjective genetic algorithm , 2002 .

[28]  Norbert R. Morgenstern,et al.  PROBABILISTIC ASSESSMENT OF STABILITY OF A CUT SLOPE IN RESIDUAL SOIL , 2005 .

[29]  Lei Wang,et al.  Reliability-Based Design of Rock Slopes – A New Perspective on Design Robustness , 2013 .