Applications of Pulsed-Waveform Oscillators in Different Operation Regimes

In this paper, following previous works, a pulsed-waveform oscillator is made up of a feedback loop containing an amplifier stage and a nonlinear transmission line. Efficient simulation techniques are applied for the correction of waveform nonidealities. A global stability analysis of the pulsed-waveform oscillator is performed, considering two relevant circuit parameters. All the possible oscillation modes are taken into account in this analysis, with the aim to guarantee operation in the desired mode only. The jitter in the pulsed waveform is quantified with a phase-noise analysis, and the uncommon form of variation of the phase-noise spectral density is understood with the aid of a semianalytical formulation. The injection-locked operation of the pulsed-waveform oscillator is also investigated, examining its robustness and possible advantages and applications. In particular, we will consider the injection-locked mode at a subharmonic frequency and analyze the resulting phase-noise spectrum, which will be compared with that of the free-running pulsed-waveform oscillator. The application as a frequency multiplier will be considered. The techniques have been applied to a prototype at 1 GHz with very good agreement with the measurement results.

[1]  A. Suárez,et al.  Phase-Noise Analysis of Injection-Locked Oscillators and Analog Frequency Dividers , 2008, IEEE Transactions on Microwave Theory and Techniques.

[2]  A. Suarez,et al.  Analysis and reduction of the oscillator phase noise from the variance of the phase deviations, determined with harmonic balance , 2008, 2008 IEEE MTT-S International Microwave Symposium Digest.

[3]  A. Demir,et al.  Phase noise in oscillators: a unifying theory and numerical methods for characterization , 2000 .

[4]  Almudena Suarez,et al.  Closed-loop stability analysis of microwave amplifiers , 2001 .

[5]  Jongsik Lim,et al.  A Novel Design of Frequency Multipliers Using Composite Right/Left Handed Transmission Line and Defected Ground Structure , 2007, 2007 Asia-Pacific Microwave Conference.

[6]  Jian Zhang,et al.  Computer-aided design of step recovery diode frequency multipliers , 1996 .

[7]  Almudena Suarez,et al.  Analysis and design of soliton oscillators using harmonic balance , 2009, 2009 IEEE MTT-S International Microwave Symposium Digest.

[8]  K. Kurokawa,et al.  Noise in Synchronized Oscillators , 1968 .

[9]  A. Hajimiri,et al.  Nonlinear transmission lines for pulse shaping in silicon , 2005, IEEE Journal of Solid-State Circuits.

[10]  Michel Remoissenet,et al.  Waves Called Solitons: Concepts and Experiments , 1996 .

[11]  S. Krakauer,et al.  Harmonic Generation, Rectification, and Lifetime Evaluation with the Step Recovery Diode , 1962, Proceedings of the IRE.

[12]  G.J. Ballantyne On the Self-Generation of Electrical Soliton Pulses , 2007, IEEE Journal of Solid-State Circuits.

[13]  Almudena Suarez,et al.  Stability Analysis of Nonlinear Microwave Circuits , 2003 .

[14]  A. Suarez,et al.  Nonlinear optimization tools for the design of high-efficiency microwave oscillators , 2004, IEEE Microwave and Wireless Components Letters.

[15]  Jean-Michel Nebus,et al.  Optimum design of very high-efficiency microwave power amplifiers based on time-domain harmonic load-pull measurements , 2001 .

[16]  Afshin S. Daryoush,et al.  Optical synchronization of millimeter-wave oscillators for distributed architecture , 1990 .

[17]  F.M. Ghannouchi,et al.  New Time-Domain Voltage and Current Waveform Measurement Setup for Power Amplifier Characterization and Optimization , 2008, IEEE Transactions on Microwave Theory and Techniques.

[18]  Zhen Ma,et al.  Active frequency-multiplier design using CAD , 2003 .

[19]  C. Page Frequency conversion with nonlinear reactance , 1957 .

[20]  S. Kudszus,et al.  W-band HEMT-oscillator MMICs using subharmonic injection locking , 2000 .

[21]  Kenneth S. Kundert,et al.  VCO jitter simulation and its comparison with measurement , 1999, Proceedings of the ASP-DAC '99 Asia and South Pacific Design Automation Conference 1999 (Cat. No.99EX198).

[22]  Almudena Suarez,et al.  Analysis and design of autonomous microwave circuits , 2009 .

[23]  M. Rodwell,et al.  Active and nonlinear wave propagation devices in ultrafast electronics and optoelectronics , 1994, Proc. IEEE.

[24]  Desmond P. Taylor,et al.  A baseband soliton oscillator , 1995 .

[25]  J. Jugo,et al.  Stability verification of microwave circuits through Floquet multiplier analysis , 2004, The 2004 IEEE Asia-Pacific Conference on Circuits and Systems, 2004. Proceedings..