Experimental and numerical studies of the pressure drop in ceramic foams for volumetric solar receiver applications

This paper presents experimental and numerical studies of the pressure drop in ceramic foams for solar air receiver applications. There are three main aims in this study. The first is to measure the pressure drop in the studied ceramic foams, and to build an empirical model based on the experimental results and a parametric numerical simulation. The second aim is to study flow field characteristics in the ceramic foams, especially in the vicinity of the interface. The third is to study the pressure drop characteristics of two modified structures (by manufacturing holes on the ceramic foams) that are expected to decrease the pressure drop in ceramic foams, but maintain good heat transfer properties. The experimental results from the samples, including two modified structures, along with the simulation results, show that the pressure drop in the ceramic foams follows a modified Darcy relationship. The experimental results also show that the two modified structures dramatically decrease the pressure drop (with pressure drop decreases up to 70% at a superficial velocity of 5 m/s). Based on both the experimental and the simulation results, a generalized model for predicting the pressure drop in ceramic foams was proposed.

[1]  Thomas Zeiser,et al.  Analysis of the flow field and pressure drop in fixed-bed reactors with the help of lattice Boltzmann simulations , 2002, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[2]  J. Murthy,et al.  Direct simulation of transport in open-cell metal foam , 2006 .

[3]  Esch Thomas,et al.  TED-AJ03-542 HEAT TRANSFER PREDICTIONS BASED ON TWO-EQUATION TURBULENCE MODELS , 2003 .

[4]  Abdulmajeed A. Mohamad,et al.  An experimental and numerical study on heat transfer enhancement for gas heat exchangers fitted with porous media , 2004 .

[5]  T. Lu,et al.  Heat transfer in open-cell metal foams , 1998 .

[6]  M. Medraj,et al.  The effect of microstructure on the permeability of metallic foams , 2007 .

[7]  Khalil Khanafer,et al.  TRANSPORT THROUGH POROUS MEDIA - A SYNTHESIS OF THE STATE OF THE ART FOR THE PAST COUPLE OF DECADES , 2005 .

[8]  Nihad Dukhan,et al.  Equivalent particle diameter and length scale for pressure drop in porous metals , 2008 .

[9]  D. Wilcox,et al.  Turbulence Modeling: An Overview , 2001 .

[10]  J. Gore,et al.  Measurement and correlation of volumetric heat transfer coefficients of cellular ceramics , 1998 .

[11]  Du Jianhu.  RESEARCH ON THE FORCED CONVECTIVE HEAT TRANSFER FOR FLUID FLOW THROUGH POROUS MEDIA WITH INTERNAL HEAT SOURCE , 1999 .

[12]  Aly H. Shaaban,et al.  The thermal modeling of a matrix heat exchanger using a porous medium and the thermal non-equilibrium model , 2008 .

[13]  Sung Jin Kim,et al.  On the limitations of the Brinkman-Forchheimer-extended Darcy equation , 1995 .

[14]  C. L. Tien,et al.  Convection in a vertical slot filled with porous insulation , 1977 .

[15]  Kambiz Vafai,et al.  Analysis of fluid flow and heat transfer interfacial conditions between a porous medium and a fluid layer , 2001 .

[16]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[17]  R. Mahajan,et al.  Thermophysical properties of high porosity metal foams , 2002 .

[18]  H. Lai,et al.  Integral Solution of a Forced Laminar Boundary Layer over an Isothermal Plate Embedded in a Porous Medium , 2009 .

[19]  Kevin Scott Boomsma.  Metal foams as novel compact high performance heat exchangers for the coolig of electronics , 2002 .

[20]  A. Steinfeld,et al.  Tomography based determination of permeability, Dupuit–Forchheimer coefficient, and interfacial heat transfer coefficient in reticulate porous ceramics , 2008 .

[21]  C. L. Tien,et al.  Analysis of condensation in porous insulation , 1981 .

[22]  D. Doermann,et al.  Heat Transfer in Open Cell Foam Insulation , 1996 .

[23]  Dominique Baillis,et al.  Spectral Radiative Properties of Open-Cell Foam Insulation , 1999 .

[24]  R. V. Edwards,et al.  A New Look at Porous Media Fluid Mechanics — Darcy to Turbulent , 1984 .

[25]  Jinsui Wu,et al.  A fractal resistance model for flow through porous media , 2007 .

[26]  Yiannis Ventikos,et al.  Simulations of flow through open cell metal foams using an idealized periodic cell structure , 2003 .

[27]  Matthew J. Hall,et al.  Measurements of pore scale flows within and exiting ceramic foams , 1996 .

[28]  Akira Nakayama,et al.  Concept of equivalent diameter for heat and fluid flow in porous media , 2007 .

[29]  S. Ergun,et al.  Fluid Flow through Randomly Packed Columns and Fluidized Beds , 1949 .

[30]  J. P. Du Plessis,et al.  Pressure drop modelling in cellular metallic foams , 2002 .

[31]  Marcel Brillouin.  Leçons sur la Viscosité des Liquides et des Gaz , 1908, Nature.

[32]  A. Bejan,et al.  Convection in Porous Media , 1992 .

[33]  M. Kaviany.  Principles of heat transfer in porous media , 1991 .

[34]  M. Innocentini,et al.  Permeability of ceramic foams to compressible and incompressible flow , 2004 .

[35]  Bettina Kraushaar-Czarnetzki,et al.  Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities , 2008 .

[36]  J. Richardson,et al.  Properties of ceramic foam catalyst supports: one-dimensional and two-dimensional heat transfer correlations , 2004 .

[37]  R. Pletcher,et al.  Computational Fluid Mechanics and Heat Transfer. By D. A ANDERSON, J. C. TANNEHILL and R. H. PLETCHER. Hemisphere, 1984. 599 pp. $39.95. , 1986, Journal of Fluid Mechanics.

[38]  J. Richardson,et al.  Properties of ceramic foam catalyst supports: pressure drop , 2000 .

[39]  S. Tassou,et al.  Thermal analysis on metal-foam filled heat exchangers. Part I: Metal-foam filled pipes , 2006 .

[40]  R. Pitz-Paal,et al.  Two novel high-porosity materials as volumetric receivers for concentrated solar radiation , 2004 .

[41]  F. Topin,et al.  Flow Laws in Metal Foams: Compressibility and Pore Size Effects , 2008 .

[42]  Savvas A. Tassou,et al.  Thermal analysis on metal-foam filled heat exchangers. Part II: Tube heat exchangers , 2006 .

[43]  David Edouard,et al.  Pressure drop measurements and modeling on SiC foams , 2007 .

[44]  I. F. Macdonald,et al.  Flow through Porous Media-the Ergun Equation Revisited , 1979 .

[45]  A. Steinfeld,et al.  Tomography-Based Determination of the Effective Thermal Conductivity of Fluid-Saturated Reticulate Porous Ceramics , 2008 .

[46]  Robert Pitz-Paal,et al.  Theoretical and Numerical Investigation of Flow Stability in Porous Materials Applied as Volumetric Solar Receivers , 2006 .

[47]  Jack Legrand,et al.  Pressure drop prediction for flow through high porosity metallic foams , 1994 .

[48]  J. Richardson,et al.  Properties of ceramic foam catalyst supports: mass and heat transfer , 2003 .

[49]  Siu-Chun Lee,et al.  Conduction and Radiation Heat Transfer in High-Porosity Fiber Thermal Insulation , 2000 .

[50]  K. Vafai,et al.  Analysis of Variants Within the Porous Media Transport Models , 2000 .

[51]  A. Tannenbaum,et al.  The 3D structure of real polymer foams. , 2004, Journal of colloid and interface science.