Flash ablation metallization of conductive thermoplastics

[1]  Ji Li,et al.  Hybrid Additive Manufacturing Method for Selective Plating of Freeform Circuitry on 3D Printed Plastic Structure , 2018, Advanced Materials Technologies.

[2]  Siddhartha Das,et al.  Direct‐Write Printed, Solid‐Core Solenoid Inductors with Commercially Relevant Inductances , 2018, Advanced Materials Technologies.

[3]  Shlomo Magdassi,et al.  Novel Materials for 3D Printing by Photopolymerization , 2018, Advanced materials.

[4]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[5]  B. Wiley,et al.  Multigram Synthesis of Cu‐Ag Core–Shell Nanowires Enables the Production of a Highly Conductive Polymer Filament for 3D Printing Electronics , 2018 .

[6]  Yue Dong,et al.  Sustainable Additive Manufacturing of Printed Circuit Boards , 2018 .

[7]  H. Friedrich,et al.  3D printing of CNT- and graphene-based conductive polymer nanocomposites by fused deposition modeling , 2017 .

[8]  J. R. Raney,et al.  Hybrid 3D Printing of Soft Electronics , 2017, Advanced materials.

[9]  Thomas J. Wallin,et al.  Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels , 2017 .

[10]  B. Wiley,et al.  Microwave metamaterials made by fused deposition 3D printing of a highly conductive copper-based filament , 2017 .

[11]  W. Kim,et al.  High performance 3D printed electronics using electroless plated copper , 2017 .

[12]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[13]  Xuan Cao,et al.  Fully Screen-Printed, Large-Area, and Flexible Active-Matrix Electrochromic Displays Using Carbon Nanotube Thin-Film Transistors. , 2016, ACS nano.

[14]  Ryan Wicker,et al.  Multiprocess 3D printing for increasing component functionality , 2016, Science.

[15]  Martine Dubé,et al.  Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications , 2016, Advanced materials.

[16]  Liwei Lin,et al.  Erratum: 3D-printed microelectronics for integrated circuitry and passive wireless sensors , 2015, Microsystems & Nanoengineering.

[17]  Matti Mäntysalo,et al.  Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers , 2015, Scientific Reports.

[18]  Hyunkyoo Kang,et al.  Direct intense pulsed light sintering of inkjet-printed copper oxide layers within six milliseconds. , 2014, ACS applied materials & interfaces.

[19]  David A. Hutchins,et al.  A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors , 2012, PloS one.

[20]  S. Kim,et al.  Synergistic improvement of thermal conductivity of thermoplastic composites with mixed boron nitride and multi-walled carbon nanotube fillers , 2012 .

[21]  G. Jabbour,et al.  Inkjet Printing—Process and Its Applications , 2010, Advanced materials.

[22]  D. Seo,et al.  Conductivity of silver paste prepared from nanoparticles , 2008 .

[23]  Hsien-Hsueh Lee,et al.  Inkjet printing of nanosized silver colloids , 2005, Nanotechnology.

[24]  Q. Li,et al.  Nanoparticle Inks for Directed Assembly of Three‐Dimensional Periodic Structures , 2003 .

[25]  Julia A. King,et al.  Evaluation of electrical conductivity models for conductive polymer composites , 2002 .

[26]  I. Lakatos,et al.  Colloids Surfaces A: Physicochem , 1998 .