A new approach to Y3Al5O12 transparent ceramics by vacuum sintering of spray-dried xerogels

[1]  Wenbin Liu,et al.  Diffusion-controlled solid-state reactive sintering of Nd:YAG transparent ceramics , 2015 .

[2]  E. Gavrishchuk,et al.  Kinetics and formation mechanism of yttrium aluminum garnet from an amorphous phase prepared by the sol–gel method , 2015 .

[3]  Xiao‐nong Cheng,et al.  Influence of non-stoichiometry on solid-state reactive sintering of YAG transparent ceramics , 2015 .

[4]  D. Shen,et al.  Systematic optimization of spray drying for YAG transparent ceramics , 2015 .

[5]  Jiangxu Li,et al.  Fabrication of YAG transparent ceramics using carbonate precipitated yttria powder , 2015 .

[6]  N. Wei,et al.  Microstructural sintering evolution and sintering parameters optimization of the silica-doped Nd:YAG ceramics using the co-precipitated raw powder , 2015 .

[7]  A. Tolmachev,et al.  The effect of residual porosity on the optical properties of Y3Al5O12:Nd3+ laser ceramics , 2015 .

[8]  Sylvain Deville,et al.  Mapping ceramics research and its evolution , 2015, ArXiv.

[9]  S. Zamir.  The Influence of Cation Additives on Grain‐Boundary Mobility in Yttrium Aluminum Garnet (YAG) , 2015 .

[10]  R. Chaim,et al.  Spark and plasma in spark plasma sintering of rigid ceramic nanoparticles: A model system of YAG , 2015 .

[11]  E. Gavrishchuk,et al.  Effect of the composition of starting yttrium aluminum hydroxide sols on the properties of yttrium aluminum garnet powders , 2014, Inorganic Materials.

[12]  A. Maître,et al.  Post-sintering treatment of neodymium-doped yttrium aluminum garnet (Nd:YAG) transparent ceramics , 2013 .

[13]  N. Frage,et al.  Effect of the spark plasma sintering (SPS) parameters and LiF doping on the mechanical properties and the transparency of polycrystalline Nd-YAG , 2012 .

[14]  R. Mann,et al.  Novel amorphous precursor densification to transparent Nd:Y2O3 Ceramics , 2012 .

[15]  E. Gavrishchuk,et al.  Synthesis and properties of yttrium hydroxyacetate sols , 2012, Inorganic Materials.

[16]  Di Zhang,et al.  Preparation of spray-dried powders leading to Nd:YAG ceramics: The effect of PVB adhesive , 2012 .

[17]  A. Tolmachev,et al.  Y3Al5O12 translucent nanostructured ceramics—Obtaining and optical properties , 2011 .

[18]  E. Gavrishchuk,et al.  Self-propagating high-temperature synthesis of Y2O3 powders from Y(NO3)3x(CH3COO)3(1 − x) · nH2O , 2011 .

[19]  Jian Zhang,et al.  Fabrication of Nd:YAG transparent ceramics with both TEOS and MgO additives , 2011 .

[20]  Shengming Zhou,et al.  Fabrication of Nd:YAG transparent ceramics with TEOS, MgO and compound additives as sintering aids , 2010 .

[21]  Adam J. Stevenson,et al.  Hot Isostatic Pressing of Transparent Nd:YAG Ceramics , 2009 .

[22]  A. Krell,et al.  Transmission physics and consequences for materials selection, manufacturing, and applications , 2009 .

[23]  Adam J. Stevenson,et al.  Toward Pore-Free Ceramics , 2008, Science.

[24]  M. Mosquera,et al.  Changes in the structure of composite colloid-polymer xerogels after cold isostatic pressing , 2008 .

[25]  V. Jayaram,et al.  Synthesis of Bulk, Dense, Nanocrystalline Yttrium Aluminum Garnet from Amorphous Powders , 2007 .

[26]  S. Gierlotka,et al.  Method of preparation and structural properties of transparent YAG nanoceramics , 2007 .

[27]  A. Krell,et al.  Effects of the Homogeneity of Particle Coordination on Solid‐State Sintering of Transparent Alumina , 2006 .

[28]  A. Gandhi,et al.  Phase selection in precursor-derived yttrium aluminum garnet and related Al_2O_3–Y_2O_3 compositions , 2005 .

[29]  Vikram Jayaram,et al.  Bulk, dense, nanocrystalline yttrium aluminum garnet by consolidation of amorphous powders at low temperatures and high pressures , 2003 .

[30]  J. H. Lee,et al.  Well-sinterable Y_3Al_5O_12 Powder from Carbonate Precursor , 2000 .

[31]  M. Kuwabara,et al.  Preparation of translucent barium titanate ceramics from sol–gel-derived transparent monolithic gels , 2000 .

[32]  C. Levi.  Metastability and microstructure evolution in the synthesis of inorganics from precursors , 1998 .

[33]  M. Kuwabara,et al.  Preparation of Transparent, Partially-Crystallized BaTiO3 Monolithic Xerogels by Sol-Gel Processing , 1998 .