Integration of multi-step stamping effects in the bending fatigue analysis of a steel wheel

Bending fatigue prediction accuracy of steel wheel can hardly be guaranteed without clearly understanding the influence of stamping process on fatigue. In this research, multi-step stamping processes of spoke were analysed by different finite element simulation techniques. Major influences of stamping process on fatigue property were distinguished. Data-mapping technique was used to transfer information between stamping and fatigue analysis models. Difference material experiments were carried out to research the influence of prestrain on material properties. Modified E-N function was established according to the theoretical analysis and material experiment results. Bending fatigue finite element simulation was carried out, and result matched experiment well both in position and cycle life.

[1]  Xiaoge Zhang,et al.  Simulation of dynamic cornering fatigue test of a steel passenger car wheel , 2010 .

[2]  Taylan Altan,et al.  An overall review of the tube hydroforming (THF) technology , 2001 .

[3]  Ping Zhu,et al.  Analysis of Fatigue Life of Dual-Phase Steel Considering the Sheet Stamping Process , 2011 .

[4]  L. Menezes,et al.  Non-uniform deformation after prestrain , 2000 .

[5]  Mauro Filippini,et al.  Multiaxial fatigue of a railway wheel steel under non-proportional loading , 2006 .

[6]  W. Kang,et al.  Analysis of manufacturing effects on fatigue failure of an automotive component using finite element methods , 2009 .

[7]  M. Nakajima,et al.  Some factors exerting an influence on the coaxing effect of austenitic stainless steels , 2012 .

[8]  P. Ramamurty Raju,et al.  Evaluation of fatigue life of aluminium alloy wheels under bending loads , 2009 .

[9]  Peter Hodgson,et al.  The effect of prestrain and bake hardening on the low-cycle fatigue properties of TRIP steel , 2008 .

[10]  Mehmet Firat,et al.  Numerical analysis of wheel cornering fatigue tests , 2001 .

[11]  T. Hughes,et al.  Collocation, dissipation and [overshoot] for time integration schemes in structural dynamics , 1978 .

[12]  Modified strain-life equation to consider the effect of different prestrain paths for dual phase sheet steel , 2009 .

[13]  Fusahito Yoshida,et al.  A model of large-strain cyclic plasticity and its application to springback simulation , 2003 .

[14]  Ruijie Wang,et al.  Low-cycle fatigue life prediction of spot welds based on hardness distribution and finite element analysis , 2009 .

[15]  G. Kridli,et al.  Effect of prestrain paths on mechanical behavior of dual phase sheet steel , 2009 .

[16]  Frank Jablonski,et al.  Prediction of fatigue limits of surface-hardened steel with regard to mean stresses and residual stresses—A comparison , 2008 .

[17]  George K. Haritos,et al.  Effect of Plastic Prestrain on High Cycle Fatigue of Ti–6Al–4V , 2002 .

[18]  H. Noguchi,et al.  Effect of prestrain on and prediction of fatigue limit in carbon steel , 2007 .

[19]  L. Menezes,et al.  A modified swift law for prestrained materials , 1998 .

[20]  Luís Menezes,et al.  Numerical simulation of tensile tests of prestrained sheets , 1999 .

[21]  André Galtier,et al.  Integration of process operation in the fatigue calculation of sheets structural parts , 2003 .