Numerical modeling of an automotive derivative polymer electrolyte membrane fuel cell cogeneration system with selective membranes
暂无分享,去创建一个
Andrea Luigi Facci | Stefano Ubertini | Thijs Peters | T. Peters | A. Facci | S. Ubertini | Gabriele Loreti | Gabriele Loreti
[1] A. Basile,et al. New PEEK-WC and PLA membranes for H 2 separation , 2017 .
[2] H. S. Fogler,et al. Elements of Chemical Reaction Engineering , 1986 .
[3] Mariagiovanna Minutillo,et al. Theoretical and experimental investigations on thermal management of a PEMFC stack , 2011 .
[4] A. Heinzel,et al. Reforming of natural gas—hydrogen generation for small scale stationary fuel cell systems , 2002 .
[5] Giampaolo Manzolini,et al. Technical assessment of a micro-cogeneration system based on polymer electrolyte membrane fuel cell and fluidized bed autothermal reformer , 2016 .
[6] G. Manzolini,et al. Definition of validated membrane reactor model for 5 kW power output CHP system for different natural gas compositions , 2016 .
[7] Gino Bella,et al. Power management of a hybrid renewable system for artificial islands: A case study , 2016 .
[8] Eric S. Fraga,et al. Options for residential building services design using fuel cell based micro-CHP and the potential for heat integration , 2015 .
[9] F. Kreith,et al. Principles of heat transfer , 1962 .
[10] Lennart Söder,et al. Distributed generation : a definition , 2001 .
[11] Luisa F. Cabeza,et al. Investigating greenhouse challenge from growing trends of electricity consumption through home appliances in buildings , 2014 .
[12] A. Basile,et al. Methanol steam reforming for hydrogen generation via conventional and membrane reactors: A review , 2014 .
[13] Alessandra Perna,et al. Performance evaluation of a fuel processing system based on membrane reactors technology integrated , 2011 .
[14] E. Kakaras,et al. 1 – Introduction to palladium membrane technology , 2015 .
[15] C. H. Kim,et al. Hydrogen production by steam methane reforming in a membrane reactor equipped with a Pd composite membrane deposited on a porous stainless steel , 2017 .
[16] Frano Barbir,et al. PEM Fuel Cells , 2006 .
[17] A. Basile,et al. Evaluation of dense Pd–Ag membrane reactor performance during methanol steam reforming in comparison with autothermal reforming using CFD analysis , 2016 .
[18] Pierluigi Mancarella,et al. Distributed multi-generation: A comprehensive view , 2009 .
[19] G. Manzolini,et al. Techno-economic Assessment of Membrane Reactor Technologies for Pure Hydrogen Production for Fuel Cell Vehicle Fleets , 2013 .
[20] Andrea Luigi Facci,et al. Numerical Assessment of an Automotive Derivative CHP Fuel Cell System , 2017 .
[21] Greg A. Whyatt,et al. Cost Study for Manufacturing of Solid Oxide Fuel Cell Power Systems , 2013 .
[22] A. Basile,et al. Theoretical study of hydrogen production using inorganic membrane reactors during WGS reaction , 2016 .
[23] C. H. Kim,et al. Methane steam reforming using a membrane reactor equipped with a Pd-based composite membrane for effective hydrogen production , 2017 .
[24] Andrea Lanzini,et al. Techno-economic and policy requirements for the market-entry of the fuel cell micro-CHP system in the residential sector , 2015 .
[25] Andrea Luigi Facci,et al. Analysis of a fuel cell combined heat and power plant under realistic smart management scenarios , 2018 .
[26] Xenophon E. Verykios,et al. An advanced reactor configuration for the partial oxidation of methane to synthesis gas , 2000 .
[27] P. Fraser. Distributed generation in liberalised electricity markets , 2003 .
[28] Fausto Gallucci,et al. A simulation study of the steam reforming of methane in a dense tubular membrane reactor , 2004 .
[29] Andrea Luigi Facci,et al. Proton exchange membrane fuel cell for cooperating households: A convenient combined heat and power solution for residential applications , 2015 .
[30] A. Basile,et al. Selective membrane application for the industrial one-step DME production process fed by CO2 rich streams: Modeling and simulation , 2017 .
[31] Jhuma Sadhukhan,et al. Distributed and micro-generation from biogas and agricultural application of sewage sludge: Comparative environmental performance analysis using life cycle approaches , 2014 .
[32] Erik Dahlquist,et al. Complementing existing CHP plants using biomass for production of hydrogen and burning the residual gas in a CHP boiler , 2017 .
[33] Luisa F. Cabeza,et al. Heating and cooling energy trends and drivers in Europe , 2017 .
[34] Francesco Calise,et al. Polygeneration system based on PEMFC, CPVT and electrolyzer: Dynamic simulation and energetic and economic analysis , 2017 .
[35] Nigel M. Sammes,et al. Small-scale fuel cells for residential applications , 2000 .
[36] V. I. Ugursal,et al. Residential cogeneration systems: Review of the current technology , 2006 .
[37] M. Sakurai,et al. Stacked etched aluminum flow-through membranes for methanol steam reforming , 2017 .
[38] Iain Staffell,et al. The cost of domestic fuel cell micro-CHP systems , 2013 .
[39] Ennio Macchi,et al. Development of a micro-cogeneration laboratory and testing of a natural gas CHP unit based on PEM fuel cells , 2014 .
[40] Elio Jannelli,et al. Analyzing microcogeneration systems based on LT-PEMFC and HT-PEMFC by energy balances , 2013 .
[41] V. I. Uvarov,et al. Original hybrid membrane-catalytic reactor for the Co-Production of syngas and ultrapure hydrogen in the processes of dry and steam reforming of methane, ethanol and DME , 2018 .
[42] Yang Zhang,et al. Comparative Study of Battery Storage and Hydrogen Storage to Increase Photovoltaic Self-sufficiency in a Residential Building of Sweden , 2016 .
[43] A. Franco,et al. Strategies for optimal penetration of intermittent renewables in complex energy systems based on techno-operational objectives , 2011 .
[44] Giampaolo Manzolini,et al. Fixed bed membrane reactor for hydrogen production from steam methane reforming: Experimental and modeling approach , 2015 .
[45] R. O’Hayre,et al. Fuel Cell Fundamentals , 2005 .
[46] Luisa F. Cabeza,et al. Heating and cooling energy trends and drivers in buildings , 2015 .
[47] I. Dybkjaer,et al. Tubular reforming and autothermal reforming of natural gas — an overview of available processes , 1995 .
[48] J. Way,et al. Palladium and palladium alloy membranes for hydrogen separation and production: History, fabrication strategies, and current performance , 2010 .
[49] A. Dixon,et al. CFD study of heat and mass transfer in ethanol steam reforming in a catalytic membrane reactor , 2017 .
[50] Shoichi Matsuda,et al. Absorption of Gases by Metals , 1949 .
[51] J. Silva,et al. A two-dimensional mathematical model for the catalytic steam reforming of methane in both conventional fixed-bed and fixed-bed membrane reactors for the Production of hydrogen , 2017 .
[52] Makbul Anwari,et al. Performance analysis of hybrid photovoltaic/diesel energy system under Malaysian conditions , 2010 .
[53] S. Singhal. Advances in solid oxide fuel cell technology , 2000 .
[54] Elio Jannelli,et al. Thermodynamic performance assessment of a small size CCHP (combined cooling heating and power) system with numerical models , 2014 .
[55] Urmila M. Diwekar,et al. Impacts assessment and tradeoffs of fuel cell based auxiliary power units: Part II. Environmental and health impacts, LCA, and multi-objective optimization , 2005 .