A review on methods for obtaining dynamical property parameters of machining processes

[1]  K. Wegener,et al.  Identification of in-process machine tool dynamics using forced vibrations in milling process , 2022, International Journal of Mechanical Sciences.

[2]  K. Ahmadi,et al.  In-Process Frequency Response Function Measurement for Robotic Milling , 2022, Experimental Techniques.

[3]  E. Budak,et al.  Alternative experimental methods for machine tool dynamics identification: A review , 2022, Mechanical Systems and Signal Processing.

[4]  K. Erkorkmaz,et al.  Optimal cutting condition selection for high quality receptance measurements by sweep milling force excitation , 2022, International Journal of Machine Tools and Manufacture.

[5]  Kun-woo Kim,et al.  Estimation of the Frequency Response Function of the Rotational Degree of Freedom , 2021, Applied Sciences.

[6]  Yuhan Wang,et al.  Multi-point substructure coupling method to compensate multi-accelerometer masses in measuring rotation-related FRFs , 2021, Journal of Manufacturing Science and Engineering.

[7]  Yusuf Altintas,et al.  Transmissibility Enhanced Inverse Chatter Stability Solution , 2021 .

[8]  Xuefeng Chen,et al.  Fuzzy control of milling chatter with piezoelectric actuators embedded to the tool holder , 2021 .

[9]  Min Wan,et al.  Stability analysis of milling process by combining the gyroscopic effect with the symmetry and runout of the cutter , 2021 .

[10]  Liping Wang,et al.  Time-varying dynamics updating method for chatter prediction in thin-walled part milling process , 2021 .

[11]  Yusuf Altintas,et al.  In-process identification of machine tool dynamics , 2021 .

[12]  F. Peng,et al.  Nonlinear process damping identification using finite amplitude stability and the influence analysis on five-axis milling stability , 2021 .

[13]  Tony L. Schmitz,et al.  Chatter Stability of Machining Operations , 2020 .

[14]  Lida Zhu,et al.  Recent progress of chatter prediction, detection and suppression in milling , 2020 .

[15]  Qingzhen Bi,et al.  A Robust RCSA-Based Method for the In Situ Measurement of Rotating Tool-Tip Frequency Response Functions , 2020 .

[16]  Feifei Xu,et al.  State of the art in milling process of the flexible workpiece , 2020, The International Journal of Advanced Manufacturing Technology.

[17]  Yoshitaka Morimoto,et al.  Fast swept sine cutting test for CNC lathes , 2020, Journal of Advanced Mechanical Design, Systems, and Manufacturing.

[18]  Chunhui Li,et al.  Identification Method of Modal Parameters of Machine Tools Under Periodic Cutting Excitation , 2020, IEEE Access.

[19]  Ryuta Sato,et al.  Time domain coupled simulation of machine tool dynamics and cutting forces considering the influences of nonlinear friction characteristics and process damping , 2020 .

[20]  Tao Huang,et al.  An improved semi-analytical approach for modeling of process damping in orthogonal cutting considering cutting edge radius , 2020, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

[21]  M. Wan,et al.  A unified process damping model considering the varying stiffness of the milling system , 2019 .

[22]  M. C. Kayacan,et al.  Effect of material removal on workpiece dynamics in milling: Modeling and measurement , 2019, Precision Engineering.

[23]  Steven Y. Liang,et al.  Chatter Stability of Micro-Milling by Considering the Centrifugal Force and Gyroscopic Effect of the Spindle , 2019, Journal of Manufacturing Science and Engineering.

[24]  Xibin Wang,et al.  Milling stability analysis with considering process damping and mode shapes of in-process thin-walled workpiece , 2019, International Journal of Mechanical Sciences.

[25]  Wen Xiao,et al.  Modal analysis using camera-based heterodyne interferometry and acoustic excitation , 2019, Mechanical Systems and Signal Processing.

[26]  Mahdi Eynian,et al.  In-process identification of modal parameters using dimensionless relationships in milling chatter , 2019, International Journal of Machine Tools and Manufacture.

[27]  Tony L. Schmitz,et al.  Multi-point coupling for tool point receptance prediction , 2019, Journal of Manufacturing Processes.

[28]  Yusuf Altintas,et al.  Analytical Modeling of Process Damping in Machining , 2019, Journal of Manufacturing Science and Engineering.

[29]  Michele Monno,et al.  Development of a generalized chatter detection methodology for variable speed machining , 2019, Mechanical Systems and Signal Processing.

[30]  Milad Pouya,et al.  Application of piezoelectric patches for chatter suppression in machining processes , 2019, Measurement.

[31]  Ying-Chao Ma,et al.  An efficient decomposition-condensation method for chatter prediction in milling large-scale thin-walled structures , 2019, Mechanical Systems and Signal Processing.

[32]  Steven Y. Liang,et al.  A review of chatter vibration research in milling , 2019, Chinese Journal of Aeronautics.

[33]  N. Maia,et al.  A method for an accurate estimation of natural frequencies using swept-sine acoustic excitation , 2019, Mechanical Systems and Signal Processing.

[34]  Yusuf Altintas,et al.  Chatter stability in robotic milling , 2019, Robotics and Computer-Integrated Manufacturing.

[35]  Min Wan,et al.  Efficient prediction of varying dynamic characteristics in thin-wall milling using freedom and mode reduction methods , 2019, International Journal of Mechanical Sciences.

[36]  K. D. Wu,et al.  Prediction of the Frequency Response Function of a Tool Holder-Tool Assembly Based on Receptance Coupling Method , 2018, Engineering, Technology & Applied Science Research.

[37]  Jia Feng,et al.  Mechanism of process damping in milling of thin-walled workpiece , 2018, International Journal of Machine Tools and Manufacture.

[38]  Tony L. Schmitz,et al.  Milling Bifurcations: A Review of Literature and Experiment , 2018, Journal of Manufacturing Science and Engineering.

[39]  Lutfi Taner Tunc,et al.  Use of inverse stability solutions for identification of uncertainties in the dynamics of machining processes , 2018, Advances in Manufacturing.

[40]  A. Mazidi,et al.  Investigation of rotary inertial dynamic effects on chatter boundary in milling process using three-dimensional Timoshenko tool model , 2018, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics.

[41]  Shreyes N. Melkote,et al.  A Method for Mode Coupling Chatter Detection and Suppression in Robotic Milling , 2018, Journal of Manufacturing Science and Engineering.

[42]  Suhas S. Joshi,et al.  Modelling time-domain vibratory deflection response of thin-walled cantilever workpieces during flank milling , 2018, Journal of Manufacturing Processes.

[43]  Yusuf Altintas,et al.  High speed tooltip FRF predictions of arbitrary tool-holder combinations based on operational spindle identification , 2018, International Journal of Machine Tools and Manufacture.

[44]  Sébastien Le Loch,et al.  Modeling and characterization of an electromagnetic system for the estimation of Frequency Response Function of spindle , 2018 .

[45]  Limin Zhu,et al.  Surface form error prediction in five-axis flank milling of thin-walled parts , 2018 .

[46]  Yuhan Wang,et al.  A new receptance coupling substructure analysis methodology to predict tool tip dynamics , 2018 .

[47]  Yusuf Altintas,et al.  Time-Domain Modeling of Varying Dynamic Characteristics in Thin-Wall Machining Using Perturbation and Reduced-Order Substructuring Methods , 2018 .

[48]  D. Bachrathy,et al.  On process damping induced by vibration-dependency of cutting direction in milling , 2018 .

[49]  Min Wan,et al.  Identification of milling process damping using operational modal analysis , 2017 .

[50]  Yusuf Altintas,et al.  Frequency Domain Updating of Thin-Walled Workpiece Dynamics Using Reduced Order Substructuring Method in Machining , 2017 .

[51]  Steven Y. Liang,et al.  Tool Point Frequency Response Prediction for Micromilling by Receptance Coupling Substructure Analysis , 2017 .

[52]  Hua Li,et al.  RCSA-Based Method for Tool Frequency Response Function Identification Under Operational Conditions Without Using Noncontact Sensor , 2017 .

[53]  Tao Huang,et al.  Minimax Optimization Strategy for Process Parameters Planning: Toward Interference-Free Between Tool and Flexible Workpiece in Milling Process , 2017 .

[54]  Bin Qi,et al.  Tool point frequency response function prediction using RCSA based on Timoshenko beam model , 2017 .

[55]  Gianni Campatelli,et al.  Improved experimental-analytical approach to compute speed-varying tool-tip FRF , 2017 .

[56]  Jianhui Li,et al.  Rapid dynamics prediction of tool point for bi-rotary head five-axis machine tool , 2017 .

[57]  Gábor Stépán,et al.  Extension of process damping to milling with low radial immersion , 2017 .

[58]  Han Ding,et al.  An improved algorithm for cutting stability estimation considering process damping , 2017 .

[59]  Gianni Campatelli,et al.  Two-points-based receptance coupling method for tool-tip dynamics prediction , 2017 .

[60]  Gábor Stépán,et al.  Chatter avoidance in cutting highly flexible workpieces , 2017 .

[61]  Tony L. Schmitz,et al.  A coupled dynamics, multiple degree of freedom process damping model, Part 1: Turning , 2016 .

[62]  Weihong Zhang,et al.  Chatter prediction for the peripheral milling of thin-walled workpieces with curved surfaces , 2016 .

[63]  Min Wan,et al.  Study of static and dynamic ploughing mechanisms by establishing generalized model with static milling forces , 2016 .

[64]  Yusuf Altintas,et al.  Stability of Milling Operations With Asymmetric Cutter Dynamics in Rotating Coordinates , 2016 .

[65]  Mohamed Haddar,et al.  Dynamic modeling of spindle-rolling bearings systems in peripheral milling operations , 2016 .

[66]  Gianni Campatelli,et al.  Improved RCSA technique for efficient tool-tip dynamics prediction , 2016 .

[67]  L. N. López de Lacalle,et al.  Improved predictions of the stability lobes for milling cutting operations of thin-wall components by considering ultra-miniature accelerometer mass effects , 2016 .

[68]  Min Wan,et al.  An improved method for tool point dynamics analysis using a bi-distributed joint interface model , 2016 .

[69]  Gianni Campatelli,et al.  Speed-varying Machine Tool Dynamics Identification Through Chatter Detection and Receptance Coupling , 2016 .

[70]  Christian Brecher,et al.  Chatter suppression techniques in metal cutting , 2016 .

[71]  Alex Iglesias,et al.  FRF Estimation through Sweep Milling Force Excitation (SMFE) , 2016 .

[72]  Erhan Budak,et al.  Modeling and Measurement of Micro End Mill Dynamics using Inverse Stability Approach , 2016 .

[73]  Erhan Budak,et al.  Identification of bearing dynamics under operational conditions for chatter stability prediction in high speed machining operations , 2015 .

[74]  Yi Wan,et al.  Application of Sherman-Morrison-Woodbury formulas in instantaneous dynamic of peripheral milling for thin-walled component , 2015 .

[75]  Krzysztof Jemielniak,et al.  Stability analysis in milling of flexible parts based on operational modal analysis , 2015 .

[76]  Yusuf Altintas,et al.  Prediction of frequency response function (FRF) of asymmetric tools from the analytical coupling of spindle and beam models of holder and tool , 2015 .

[77]  Tony L. Schmitz,et al.  Radial depth of cut stability lobe diagrams with process damping effects , 2015 .

[78]  Mahdi Eynian,et al.  Vibration frequencies in stable and unstable milling , 2015 .

[79]  Erhan Budak,et al.  In-process tool point FRF identification under operational conditions using inverse stability solution , 2015 .

[80]  Miguel Ángel Sebastián,et al.  Overview of the State of Robotic Machining: Current Situation and Future Potential , 2015 .

[81]  Lin Gui,et al.  A Method for Identification of Machine-tool Dynamics under Machining☆ , 2015 .

[82]  David L. Brown,et al.  Forty Years of Use and Abuse of Impact Testing: A Practical Guide to Making Good FRF Measurements , 2015 .

[83]  Guofu Yin,et al.  An improved RCSA for identifying the spindle-holder taper joint dynamics , 2014 .

[84]  O. Özşahin,et al.  Analytical modeling of asymmetric multi-segment rotor - bearing systems with Timoshenko beam model including gyroscopic moments , 2014 .

[85]  Bin Li,et al.  Modelling the spindle–holder taper joint in machine tools: A tapered zero-thickness finite element method , 2014 .

[86]  Yusuf Altintas,et al.  Identification of Machining Process Damping Using Output-Only Modal Analysis , 2014 .

[87]  Dragos Axinte,et al.  Novel ancillary device for minimising machining vibrations in thin wall assemblies , 2014 .

[88]  Jokin Munoa,et al.  Receptance coupling for tool point dynamic prediction by fixed boundaries approach , 2014 .

[89]  Dragos Axinte,et al.  Coupled interaction of dynamic responses of tool and workpiece in thin wall milling , 2013 .

[90]  Michele Monno,et al.  A new receptance coupling substructure analysis methodology to improve chatter free cutting conditions prediction , 2013 .

[91]  Simon S. Park,et al.  FRF based joint dynamics modeling and identification , 2013 .

[92]  Bin Li,et al.  Estimation of CNC machine–tool dynamic parameters based on random cutting excitation through operational modal analysis , 2013 .

[93]  Yusuf Altintas,et al.  Chatter Stability Model of Micro-Milling With Process Damping , 2013 .

[94]  L. T. Tunc,et al.  Identification and Modeling of Process Damping in Milling , 2013 .

[95]  Yinuo Shi,et al.  Gyroscopic and mode interaction effects on micro-end mill dynamics and chatter stability , 2013 .

[96]  Bo Wu,et al.  Dynamic Parameter Identification of Tool-Spindle Interface Based on RCSA and Particle Swarm Optimization , 2013 .

[97]  V. Vermel,et al.  Thin-Walled Part Machining Process Parameters Optimization based on Finite-Element Modeling of Workpiece Vibrations , 2013 .

[98]  Dirk Biermann,et al.  MODELING WORKPIECE DYNAMICS USING SETS OF DECOUPLED OSCILLATOR MODELS , 2012 .

[99]  Eiji Shamoto,et al.  Identification of transfer function by inverse analysis of self-excited chatter vibration in milling operations , 2012 .

[100]  Hamed Moradi,et al.  Extending the inverse receptance coupling method for prediction of tool-holder joint dynamics in milling , 2012 .

[101]  Suleyman Neseli,et al.  Decomposition of process damping ratios and verification of process damping model for chatter vibration , 2012 .

[102]  Uttara Kumar,et al.  Spindle dynamics identification for Receptance Coupling Substructure Analysis , 2012 .

[103]  Leonel Francisco Castañeda Heredia,et al.  Identification of the technical state of suspension elements in railway systems , 2012 .

[104]  Lutfi Taner Tunc,et al.  Effect of cutting conditions and tool geometry on process damping in machining , 2012 .

[105]  Zhengjia He,et al.  Chatter stability of milling with speed-varying dynamics of spindles , 2012 .

[106]  L. Taner Tunç,et al.  Prediction of workpiece dynamics and its effects on chatter stability in milling , 2012 .

[107]  H. Miao,et al.  Relationship between the Ratio of Young’s Modulus to Hardness and the Elastic Recovery of Nanoindentation , 2011 .

[108]  Mohamed A. Elbestawi,et al.  Force prediction and stability analysis of plunge milling of systems with rigid and flexible workpiece , 2011 .

[109]  Guillem Quintana,et al.  Chatter in machining processes: A review , 2011 .

[110]  Grégoire Peigné,et al.  Simulation of low rigidity part machining applied to thin-walled structures , 2011 .

[111]  Erhan Budak,et al.  Investigating Dynamics of Machine Tool Spindles under Operational Conditions , 2011 .

[112]  Junz Jiunn-jyh Wang,et al.  Effects of cutting conditions on dynamic cutting factor and process damping in milling , 2011 .

[113]  Fathy Ismail,et al.  Analytical stability lobes including nonlinear process damping effect on machining chatter , 2011 .

[114]  Aitzol Lamikiz,et al.  Critical Thickness and Dynamic Stiffness for Chatter Avoidance in Thin Floors Milling , 2011 .

[115]  Francisco J. Campa,et al.  Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams , 2011 .

[116]  Erhan Budak,et al.  Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions , 2010 .

[117]  O. B. Adetoro,et al.  An improved prediction of stability lobes using nonlinear thin wall dynamics , 2010 .

[118]  Xiaoming Zhang,et al.  Matrix perturbation method for predicting dynamic modal shapes of the workpiece in high-speed machining , 2010 .

[119]  Lutfi Taner Tunc,et al.  Identification and modeling of process damping in turning and milling using a new approach , 2010 .

[120]  Yusuf Altintas,et al.  Chatter Stability in Turning and Milling with in Process Identified Process Damping , 2010 .

[121]  Victor Songmene,et al.  Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis , 2009 .

[122]  Lutfi Taner Tunc,et al.  A New Method for Identification and Modeling of Process Damping in Machining , 2009 .

[123]  Yusuf Altintas,et al.  Chatter Stability of General Turning Operations With Process Damping , 2009 .

[124]  Shan Shan Sun,et al.  Dynamics and Stability of Milling Process Considering the Gyroscopic Effects , 2009 .

[125]  Martin B.G. Jun,et al.  Modeling of dynamic micro-milling cutting forces , 2009 .

[126]  Erhan Budak,et al.  A closed-form approach for identification of dynamical contact parameters in spindle–holder–tool assemblies , 2009 .

[127]  Tony L. Schmitz,et al.  An improved tool–holder model for RCSA tool-point frequency response prediction , 2009 .

[128]  Peter Eberhard,et al.  Analysis of Dynamic Stability for Milling Processes with Varying Workpiece Dynamics , 2008 .

[129]  Paul Xirouchakis,et al.  Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components , 2008 .

[130]  Per Gren,et al.  Measurement of milling tool vibrations during cutting using laser vibrometry , 2008 .

[131]  Gilles Dessein,et al.  Surface roughness variation of thin wall milling, related to modal interactions , 2008 .

[132]  Pascal Ray,et al.  Stability-based spindle speed control during flexible workpiece high-speed milling , 2008 .

[133]  Yusuf Altintas,et al.  Identification of dynamic cutting force coefficients and chatter stability with process damping , 2008 .

[134]  Tony L. Schmitz,et al.  ROTATING TOOL POINT FREQUENCY RESPONSE PREDICTION USING RCSA , 2007 .

[135]  Tony L. Schmitz,et al.  Shrink fit tool holder connection stiffness/damping modeling for frequency response prediction in milling , 2007 .

[136]  Yusuf Altintas,et al.  Modeling of spindle-bearing and machine tool systems for virtual simulation of milling operations , 2007 .

[137]  Yusuf Altintas,et al.  Modeling and identification of tool holder–spindle interface dynamics , 2007 .

[138]  Matti Rantatalo,et al.  Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement , 2007 .

[139]  Pascal Ray,et al.  Model-based chatter stability prediction for high-speed spindles , 2007 .

[140]  Zhiyi Zhang,et al.  Data processing in subspace identification and modal parameter identification of an arch bridge , 2007 .

[141]  Matti Rantatalo,et al.  Laser vibrometry measurements of an optically smooth rotating spindle , 2007 .

[142]  Pascal Ray,et al.  Stability-Based Spindle Design Optimization , 2007 .

[143]  Theory of Regenerative Machine Tool Chatter· , 2007 .

[144]  Erhan Budak,et al.  Analytical modeling of spindle-tool dynamics on machine tools using Timoshenko beam model and receptance coupling for the prediction of tool point FRF , 2006 .

[145]  Mohammad R. Movahhedy,et al.  Prediction of chatter in high speed milling including gyroscopic effects , 2006 .

[146]  Hui Zhang,et al.  Chatter analysis of robotic machining process , 2006 .

[147]  A. Moufki,et al.  A semi-analytical model of non-linear vibrations in orthogonal cutting and experimental validation , 2006 .

[148]  Mohammad R. Movahhedy,et al.  Prediction of spindle dynamics in milling by sub-structure coupling , 2006 .

[149]  N. K. Chandiramani,et al.  Dynamics of 2-dof regenerative chatter during turning , 2006 .

[150]  Tony L. Schmitz,et al.  Receptance coupling for dynamics prediction of assemblies with coincident neutral axes , 2006 .

[151]  Hongqi Li,et al.  A Comprehensive Dynamic End Milling Simulation Model , 2006 .

[152]  Gilles Dessein,et al.  Integration of dynamic behaviour variations in the stability lobes method: 3D lobes construction and application to thin-walled structure milling , 2006 .

[153]  Junz Jiunn-jyh Wang,et al.  Mechanistic Modeling of Process Damping in Peripheral Milling , 2007 .

[154]  Francisco J. Campa,et al.  Stability limits of milling considering the flexibility of the workpiece and the machine , 2005 .

[155]  Tony L. Schmitz,et al.  Three-Component Receptance Coupling Substructure Analysis for Tool Point Dynamics Prediction , 2005 .

[156]  Gao De-ping.  Theoretical Analysis and Experiment of the High Speed Ceramic Rolling Bearing Equivalent Stiffness , 2005 .

[157]  Yusuf Altintas,et al.  Virtual Design and Optimization of Machine Tool Spindles , 2005 .

[158]  Kenan Y. Sanliturk,et al.  Elimination of transducer mass loading effects from frequency response functions , 2005 .

[159]  J. Dario Aristizabal-Ochoa,et al.  Timoshenko Beam-Column with Generalized End Conditions and Nonclassical Modes of Vibration of Shear Beams , 2004 .

[160]  Tong Zhao,et al.  Experimental and Analytical Modal Analysis of Steel Arch Bridge , 2004 .

[161]  Gilles Dessein,et al.  INFLUENCE OF MATERIAL REMOVAL ON THE DYNAMIC BEHAVIOR OF THIN-WALLED STRUCTURES IN PERIPHERAL MILLING , 2004 .

[162]  Steve Rothberg,et al.  On the application of laser vibrometry to translational and rotational vibration measurements on rotating shafts , 2004 .

[163]  Jinhee Lee,et al.  Eigenvalue analysis of Timoshenko beams and axisymmetric Mindlin plates by the pseudospectral method , 2004 .

[164]  P. Guillaume,et al.  The PolyMAX Frequency-Domain Method: A New Standard for Modal Parameter Estimation? , 2004 .

[165]  Song Zhang,et al.  Dynamic Modeling for High-Speed Milling System with Centrifugal Force and Gyroscopic Effect , 2003 .

[166]  G. L. Xiong,et al.  Study of the gyroscopic effect of the spindle on the stability characteristics of the milling system , 2003 .

[167]  Yusuf Altintas,et al.  Receptance coupling for end mills , 2003 .

[168]  Yung C. Shin,et al.  A comprehensive chatter prediction model for face turning operation including tool wear effect , 2002 .

[169]  B. Peeters,et al.  Stochastic System Identification for Operational Modal Analysis: A Review , 2001 .

[170]  Tony L. Schmitz,et al.  Tool Point Frequency Response Prediction for High-Speed Machining by RCSA , 2001 .

[171]  Yusuf Altintas,et al.  Analytical Prediction of Three Dimensional Chatter Stability in Milling , 2001 .

[172]  Marian Wiercigroch,et al.  Sources of nonlinearities, chatter generation and suppression in metal cutting , 2001, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[173]  Jifang Tian,et al.  Chatter Instability in Milling Systems with Flexible Rotating Spindles—A New Theoretical Approach , 2001 .

[174]  Bruce Geist,et al.  Asymptotic Formulas for the Eigenvalues of the Timoshenko Beam , 2001 .

[175]  Rune Brincker,et al.  Modal identification of output-only systems using frequency domain decomposition , 2001 .

[176]  J. R. BELL,et al.  Rotational vibration measurements using laser doppler vibrometry: comprehensive theory and practical application , 2000 .

[177]  Balakumar Balachandran,et al.  Impact Dynamics in Milling of Thin-Walled Structures , 1996, Nonlinear Dynamics and Controls.

[178]  Tony L. Schmitz,et al.  Predicting High-Speed Machining Dynamics by Substructure Analysis , 2000 .

[179]  H. Benaroya,et al.  DYNAMICS OF TRANSVERSELY VIBRATING BEAMS USING FOUR ENGINEERING THEORIES , 1999 .

[180]  Bruce Geist,et al.  Eigenvalue formulas for the uniform Timoshenko beam: the free-free problem , 1998 .

[181]  Yusuf Altintas,et al.  Analytical Prediction of Chatter Stability in Milling—Part I: General Formulation , 1998 .

[182]  Yusuf Altintas,et al.  Analytical Prediction of Chatter Stability in Milling—Part II: Application of the General Formulation to Common Milling Systems , 1998 .

[183]  Steven Y. Liang,et al.  Chatter stability of a slender cutting tool in turning with tool wear effect , 1998 .

[184]  Mohamed A. Elbestawi,et al.  An Enhanced Dynamic Model in Turning Including the Effect of Ploughing Forces , 1997 .

[185]  Subhajit Chatterjee,et al.  Spindle deflections in high-speed machine tools — Modelling and simulation , 1996 .

[186]  William J. Endres,et al.  A Dual-Mechanism Approach to the Prediction of Machining Forces, Part 1: Model Development , 1995 .

[187]  Yusuf Altintas,et al.  Analytical Prediction of Stability Lobes in Milling , 1995 .

[188]  Y. S. Tarng,et al.  An analytical model of chatter vibration in metal cutting , 1994 .

[189]  Bart De Moor,et al.  Subspace algorithms for the stochastic identification problem, , 1993, Autom..

[190]  P.A.A. Laura,et al.  Analysis of Vibrating Timoshenko Beams Using the Method of Differential Quadrature , 1993 .

[191]  George M. Pharr,et al.  On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation , 1992 .

[192]  Yusuf Altintas,et al.  Mechanism of Cutting Force and Surface Generation in Dynamic Milling , 1991 .

[193]  I. E. Minis,et al.  Improved Methods for the Prediction of Chatter in Turning , 1990 .

[194]  H. Nevzat Özgüven,et al.  Structural modifications using frequency response functions , 1990 .

[195]  D. W. Wu,et al.  A New Approach of Formulating the Transfer Function for Dynamic Cutting Processes , 1989 .

[196]  D. William Wu,et al.  Application of a comprehensive dynamic cutting force model to orthogonal wave-generating processes , 1988 .

[197]  J. Tlustý,et al.  Special Aspects of Chatter in Milling , 1983 .

[198]  B. Lawn,et al.  Elastic recovery at hardness indentations , 1981 .

[199]  J. Tlusty,et al.  Basic Non-Linearity in Machining Chatter , 1981 .

[200]  H. D. Nelson.  A Finite Rotating Shaft Element Using Timoshenko Beam Theory , 1980 .

[201]  H. D. Nelson,et al.  The Dynamics of Rotor-Bearing Systems Using Finite Elements , 1976 .

[202]  S. A. Tobias,et al.  A Theory of Nonlinear Regenerative Chatter , 1974 .

[203]  Mihailo D. Trifunac,et al.  Comparisons between ambient and forced vibration experiments , 1972 .

[204]  G. J. DeSalvo,et al.  A New Approach to Plasticity and Its Application to Blunt Two Dimensional Indenters , 1970 .

[205]  R. Sridhar,et al.  A Stability Algorithm for a Special Case of the Milling Process: Contribution to Machine Tool Chatter Research—6 , 1968 .

[206]  R. Sridhar,et al.  A Stability Algorithm for the General Milling Process: Contribution to Machine Tool Chatter Research—7 , 1968 .

[207]  S. A. Tobias,et al.  The relation between the static and the dynamic cutting of metals , 1967 .

[208]  H. E. Merritt.  Theory of Self-Excited Machine-Tool Chatter: Contribution to Machine-Tool Chatter Research—1 , 1965 .

[209]  S. A. Tobias.  Machine tool vibration research , 1961 .

[210]  S. A. Tobias,et al.  The Chatter of Lathe Tools Under Orthogonal Cutting Conditions , 1958, Journal of Fluids Engineering.

[211]  S. Kato,et al.  Chatter Vibration of Lathe Tools , 1956, Journal of Fluids Engineering.

[212]  R N Arnold,et al.  Cutting Tools Research: Report of Subcommittee on Carbide Tools: The Mechanism of Tool Vibration in the Cutting of Steel , 1946 .

[213]  Yuhan Wang,et al.  Determining rotating tool-tip FRFs by measuring holder-point FRFs based on a robust frequency-based substructure method , 2022 .