Stable bonding of W and ODS steel fabricated by TLP diffusion technology through inserting a novel composite interlayer Zr/Cu

[1]  Yusheng Shi,et al.  Hot isostatic pressing of a near α-Ti alloy: Temperature optimization, microstructural evolution and mechanical performance evaluation , 2020 .

[2]  Pinghuai Wang,et al.  Diffusion bonding W and RAFM-steel with an Fe interlayer by hot isostatic pressing , 2020 .

[3]  Donghua Xie,et al.  Effect of holding time on the microstructure and strength of tungsten/steel joints by HIP diffusion bonded using a Cu interlayer , 2020 .

[4]  Xiaoxin Zhang,et al.  A new method for preparing 9Cr-ODS steel using elemental yttrium and Fe2O3 oxygen carrier , 2019, Journal of Alloys and Compounds.

[5]  Wensheng Liu,et al.  Fabrication of W/steel joint using hot isostatic pressing with Ti/Cu/Ti liquid forming interlayer , 2018, Fusion Engineering and Design.

[6]  Wensheng Liu,et al.  Influence of intermetallic compounds on the microstructure and strength properties of diffusion bonded W–steel joints using Ti/Ni composite interlayer , 2018, Fusion Engineering and Design.

[7]  Wensheng Liu,et al.  Microstructural evolution and mechanical properties in the partial transient liquid phase diffusion bonding of tungsten to steel , 2018, International Journal of Refractory Metals and Hard Materials.

[8]  Yong Du,et al.  Interdiffusion behaviors and mechanical properties of Cu-Zr system , 2018, Calphad.

[9]  C. Yan,et al.  A novel hybrid selective laser melting/hot isostatic pressing of near-net shaped Ti-6Al-4V alloy using an in-situ tooling: Interfacial microstructure evolution and enhanced mechanical properties , 2018 .

[10]  C. Liang,et al.  Rational design of composite interlayer for diffusion bonding of tungsten–steel joints , 2018 .

[11]  Seungyon Cho,et al.  HIP Joining of Tungsten Armor to Ferritic-Martensitic Steel with a Zirconium Interlayer , 2017 .

[12]  J. Aktaa,et al.  Process optimization for diffusion bonding of tungsten with EUROFER97 using a vanadium interlayer , 2015 .

[13]  Wensheng Liu,et al.  Microstructure, residual stresses and mechanical properties of diffusion bonded tungsten–steel joint using a V/Cu composite barrier interlayer , 2015 .

[14]  Xiaoxin Zhang,et al.  Microstructure, mechanical properties and bonding characteristic of deformed tungsten , 2014 .

[15]  Wensheng Liu,et al.  Microstructure and mechanical properties of diffusion bonded W/steel joint using V/Ni composite interlayer , 2013 .

[16]  Dong Won Lee,et al.  Interfacial microstructures of HIP joined W and ferritic–martensitic steel with Ti interlayers , 2013 .

[17]  J. Aktaa,et al.  Investigation of tungsten/EUROFER97 diffusion bonding using Nb interlayer , 2011 .

[18]  W. Gierlotka,et al.  Thermodynamic description of the binary Ag–Ga system , 2011 .

[19]  R. N. Giniyatulin,et al.  He-cooled divertor for DEMO: Status of development and HHF tests , 2010 .

[20]  A. Kohyama,et al.  Effect of joining temperature on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer , 2010 .

[21]  T. Nagasaka,et al.  Joining of ODS Steels and Tungsten for Fusion Applications , 2010 .

[22]  A. Kohyama,et al.  Microstructure and mechanical properties of diffusion bonded joints between tungsten and F82H steel using a titanium interlayer , 2010 .

[23]  A. Kohyama,et al.  Effect of holding time on the microstructure and strength of tungsten/ferritic steel joints diffusion bonded with a nickel interlayer , 2009 .

[24]  W. Krauss,et al.  Fabrication of a He-cooled divertor module for DEMO reactor , 2007 .