Rolling contact fatigue and wear properties of 0.1C-3Cr-2W-V nitrided steel

[1]  L. Keer,et al.  A study of rolling-contact fatigue of bearing steel coated with physical vapor deposition TiN films: Coating response to cyclic contact stress and physical mechanisms underlying coating effect on the fatigue life , 1998 .

[2]  T. Bell,et al.  Sliding wear characteristics of low temperature plasma nitrided 316 austenitic stainless steel , 1998 .

[3]  A. Batchelor,et al.  Effect of lubrication by mineral and synthetic oils on the sliding wear of plasma nitrided AISI 410 stainless steel , 1998 .

[4]  V. Leskovšek,et al.  Wear properties of induction hardened, conventional plasma nitrided and pulse plasma nitrided AISI 4140 steel in dry sliding conditions , 1999 .

[5]  M. Hadfield,et al.  Failure modes of plasma sprayed WC–15%Co coated rolling elements , 1999 .

[6]  Mark Hadfield,et al.  Rolling contact fatigue failure modes of lubricated silicon nitride in relation to ring crack defects , 1999 .

[7]  J. Vižintin,et al.  Wear Properties of Plasma Nitrided Steel in Dry Sliding Conditions , 1999 .

[8]  M. Karamiş,et al.  Wear behaviour of plasma nitrided steels at ambient and elevated temperatures , 2000 .

[9]  Yu Zhiwei,et al.  The wear and corrosion properties of stainless steel nitrided by low-pressure plasma-arc source ion nitriding at low temperatures , 2000 .

[10]  C. Li,et al.  Factors influencing fretting fatigue properties of plasma-nitrided low alloy steel , 2000 .

[11]  J. Ferreira,et al.  Fatigue and fretting fatigue of ion-nitrided 34CrNiMo6 steel , 2001 .

[12]  G. Socrates,et al.  Infrared and Raman characteristic group frequencies : tables and charts , 2001 .

[13]  Mark Hadfield,et al.  A study of line defect fatigue failure of ceramic rolling elements in rolling contact , 2002 .

[14]  Elena Kabo,et al.  Material defects in rolling contact fatigue — influence of overloads and defect clusters , 2002 .

[15]  C. Allen,et al.  The effect of fretting on the fatigue behaviour of plasma nitrided stainless steels , 2003 .

[16]  Feng Zhou,et al.  Friction and wear behavior of plasma nitrided 1Cr18Ni9Ti austenitic stainless steel under lubrication condition , 2005 .

[17]  Katsuyuki Kida,et al.  Flaking failure originating from a single surface crack in silicon nitride under rolling contact fatigue , 2005 .

[18]  R. Gnanamoorthy,et al.  Fretting wear behavior of liquid nitrided structural steel, En24 and bearing steel, En31 , 2006 .

[19]  Zulfiqar Ahmad Khan,et al.  Residual stress variations during rolling contact fatigue of refrigerant lubricated silicon nitride bearing elements , 2006 .

[20]  F. Walther,et al.  Friction and rolling–sliding wear of DC-pulsed plasma nitrided AISI 410 martensitic stainless steel , 2006 .

[21]  Feng Zhou,et al.  Tribological properties of plasma nitrided stainless steel against SAE52100 steel under ionic liquid lubrication condition , 2006 .

[22]  Xiaofeng Wang,et al.  Rolling contact fatigue and mechanical properties of titanium carbide film synthesized on bearing steel surface , 2007 .

[23]  R. Gnanamoorthy,et al.  Study of damage mechanisms and failure analysis of sintered and hardened steels under rolling–sliding contact conditions , 2007 .

[24]  S. Raman,et al.  Influence of plasma nitriding on plain fatigue and fretting fatigue behaviour of AISI 304 austenitic stainless steel , 2007 .

[25]  Xiaofeng Wang,et al.  Fatigue life and mechanical behaviors of bearing steel by nitrogen plasma immersion ion implantation , 2007 .

[26]  Ramiro C. Martins,et al.  Micropitting performance of nitrided steel gears lubricated with mineral and ester oils , 2009 .

[27]  Fu-Zhen Xuan,et al.  Fatigue resistance and failure mechanisms of plasma-sprayed CrC–NiCr cermet coatings in rolling contact , 2009 .

[28]  Zhong-yu Piao,et al.  Influence of undercoating on rolling contact fatigue performance of Fe-based coating , 2010 .

[29]  S. Sasaki,et al.  Remarkable friction stabilization of AISI 52100 steel by plasma nitriding under lubrication of alkyl naphthalene , 2010 .

[30]  P. M. Raole,et al.  Plasma nitriding of AISI 52100 ball bearing steel and effect of heat treatment on nitrided layer , 2011 .

[31]  Z. D. Wang,et al.  Failure mode and fatigue mechanism of laser-remelted plasma-sprayed Ni alloy coatings in rolling contact , 2011 .

[32]  I. Kaymaz,et al.  Fretting fatigue properties of plasma nitrided AISI 316 L stainless steel: Experiments and finite element analysis , 2011 .

[33]  W. Yue,et al.  Comparing tribological behaviors of plasma nitrided and untreated bearing steel under lubrication with phosphor and sulfur-free organotungsten additive , 2012 .

[34]  Zhong-yu Piao,et al.  Influence of Surface Roughness on Rolling Contact Fatigue Behavior of Fe-Cr Alloy Coatings , 2013, Journal of Materials Engineering and Performance.

[35]  Johan Sandström,et al.  Subsurface rolling contact fatigue damage of railway wheels – A probabilistic analysis , 2012 .

[36]  Wen Dong-hui,et al.  Influence of surface nitriding treatment on rolling contact behavior of Fe-based plasma sprayed coating , 2013 .

[37]  G. Subhash,et al.  Evolution of subsurface plastic zone due to rolling contact fatigue of M-50 NiL case hardened bearing steel , 2014 .