A Windage Power Loss Model for Spur Gear Pairs

This article proposes a simplified fluid mechanics–based model to predict the windage power loss of a spur gear pair operating under jet lubrication conditions. In this model, the total windage power loss is defined as the sum of (a) the losses associated with the interactions of individual gears with the air or air–oil mixture and (b) the losses due to pocketing/squeezing of the same medium at the gear mesh interface. The first group of losses is modeled through a formulation for air drag forces induced on each rotating gear body along its faces and periphery (circumference). The pocketing power loss is modeled analytically through a compressible fluid flow formulation. The windage power loss model predictions are compared to published gear pair windage experiments and empirical formulae to assess their accuracy. Results of a parametric study are also presented to quantify the impact of key system parameters as well as individual contributions of each component to the total windage power loss.

[1]  Susumu Matsumoto,et al.  Temperature Distribution in Teeth and Blanks of Ultra-High-Speed Gears , 2001 .

[2]  Kathy Simmons,et al.  Modelling windage power loss from an enclosed spur gear , 2007 .

[3]  P H Dawson.  Windage Loss in Larger High-Speed Gears , 1984 .

[4]  Darle W. Dudley,et al.  Handbook of Practical Gear Design , 1984 .

[5]  Sheng Li,et al.  Influence of Design Parameters on Mechanical Power Losses of Helical Gear Pairs , 2009 .

[6]  Ahmet Kahraman,et al.  Oil Churning Power Losses of a Gear Pair: Experiments and Model Validation , 2009 .

[7]  Fabrice Ville,et al.  Experimental and Numerical Investigations on the Air-Pumping Phenomenon in High-Speed Spur and Helical Gears , 2005 .

[8]  Graham Johnson,et al.  Gear Windage: A Review , 2008 .

[9]  Mjd Powell,et al.  A Fortran subroutine for solving systems of non-linear algebraic equations , 1968 .

[10]  Ahmet Kahraman,et al.  Load-Independent Spin Power Losses of a Spur Gear Pair: Model Formulation , 2009 .

[11]  Ahmet Kahraman,et al.  Prediction of Mechanical Efficiency of Parallel-Axis Gear Pairs , 2007 .

[12]  Ahmet Kahraman,et al.  An Experimental Investigation of Spur Gear Efficiency , 2008 .

[13]  Kiyohiko Umezawa,et al.  The Sound Radiated from Gears : On the Existence of Aerodynamic Sound : Vibration, Control Engineering, Engineering for Industry , 1987 .

[14]  G. W. Vickers,et al.  Experimental and Computational Assessment of Windage Losses in Rotating Machinery , 1996 .

[15]  Susumu Matsumoto,et al.  Temperature Distribution in Teeth and Blanks of Ultra High-Speed Gears : 1st Report, Measurement of Temperature Distribution in Teeth and Blanks , 2001 .

[16]  Fabrice Ville,et al.  Investigations on power losses in high-speed gears , 2006 .