Abstract A fibre optic sensor capable of the distributed detection of multiple hydrocarbon fuel and solvent spills is described. The sensor incorporates liquid-swelling polymers that convert the swelling into a microbend force on an optical fibre when activated. Sensor interrogation is conducted using a standard optical time domain reflectometry (OTDR) technique. This provides the potential of locating target hydrocarbon fuel and solvent spills at many separate positions along the sensor length. Typical sensor response time after exposure to the fuel is 30 s using the current design. Sensors that are capable of locating 1 m long spill events with a location accuracy of 2.5 m over a range of 2 km are reported. A brief description of the underlying technology and the material evaluation tests are presented followed by initial sensor evaluation results. Laboratory and experimental field trials demonstrating repeatability and the simultaneous location of multiple fuel spills are summarised. Automatic detection of events using a custom-built OTDR instrument is briefly discussed and finally the potential applications for this type of sensor technology are outlined.
[1]
Graham Thursby,et al.
Hydrogel/fiber optic sensor for distributed measurement of humidity and pH value
,
1998,
Smart Structures.
[2]
Brian Culshaw,et al.
Distributed pH and water detection using fiber-optic sensors and hydrogels
,
1995
.
[3]
J. N. Fields.
Attenuation of a parabolic‐index fiber with periodic bends
,
1980
.
[4]
M B Diemeer,et al.
Fiber-optic microbend sensors: sensitivity as a function of distortion wavelength.
,
1984,
Optics letters.
[5]
E. Gyorgy,et al.
Large growth‐induced anisotropy to preferential occupation of the iron sites in garnets
,
1980
.