Design and Performance Evaluation of a Rotary Magnetorheological Damper for Unmanned Vehicle Suspension Systems

We designed and validated a rotary magnetorheological (MR) damper with a specified damping torque capacity, an unsaturated magnetic flux density (MFD), and a high magnetic field intensity (MFI) for unmanned vehicle suspension systems. In this study, for the rotary type MR damper to have these satisfactory performances, the roles of the sealing location and the cover case curvature of the MR damper were investigated by using the detailed 3D finite element model to reflect asymmetrical shapes and sealing components. The current study also optimized the damper cover case curvature based on the MFD, the MFI, and the weight of the MR damper components. The damping torques, which were computed using the characteristic equation of the MR fluid and the MFI of the MR damper, were 239.2, 436.95, and 576.78 N·m at currents of 0.5, 1, and 1.5 A, respectively, at a disk rotating speed of 10 RPM. These predicted damping torques satisfied the specified damping torque of 475 N·m at 1.5 A and showed errors of less than 5% when compared to experimental measurements from the MR damper manufactured by the proposed design. The current study could play an important role in improving the performance of rotary type MR dampers.

[1]  W. H. Li,et al.  Finite Element Analysis and Simulation Evaluation of a Magnetorheological Valve , .

[2]  Junji Furusho,et al.  Fast Response MR-Fluid Actuator , 2004 .

[3]  Afzal Suleman,et al.  Multidisciplinary design optimization of an automotive magnetorheological brake design , 2008 .

[4]  Afzal Suleman,et al.  Improved braking torque generation capacity of an eddy current brake with time varying magnetic fields: A numerical study , 2012 .

[5]  Seung-Bok Choi,et al.  Optimal design of a vehicle magnetorheological damper considering the damping force and dynamic range , 2008 .

[6]  Seung-bok Choi,et al.  Geometry optimization of MR valves constrained in a specific volume using the finite element method , 2007 .

[7]  W. K. Baek,et al.  Roll Characteristics Evaluation due to the Steering of a SUV with MR Dampers , 2009 .

[8]  Billie F. Spencer,et al.  Large-scale MR fluid dampers: modeling and dynamic performance considerations , 2002 .

[9]  Keum-Shik Hong,et al.  Sensitivity control of a MR-damper semi-active suspension , 2010 .

[10]  Afzal Suleman,et al.  Design considerations for an automotive magnetorheological brake , 2008 .

[11]  허남건,et al.  자기장 및 유동 해석을 이용한 자기유변 클러치의 성능 예측 및 검증 ( Design analysis and experimental evaluation of an MR fluid clutch ) , 1999 .

[12]  Seung-Bok Choi,et al.  Optimal Design of an Hybrid Magnetorheological Brake for Middle-Sized Motorcycles , 2011 .

[13]  J. Carlson,et al.  MR fluid, foam and elastomer devices , 2000 .

[14]  Sanghyun Joo,et al.  A High-Speed Autonomous Navigation Based on Real Time Traversability for 6×6 Skid Vehicle , 2012 .

[15]  M. Kciuk,et al.  Experimental and numerical studies of MR damper with prototype magnetorheological fluid , 2010 .

[16]  Afzal Suleman,et al.  A performance evaluation of an automotive magnetorheological brake design with a sliding mode controller , 2006 .

[17]  Niccolò Baldanzini,et al.  Design and testing of a MRF rotational damper for vehicle applications , 2010 .

[18]  Kum-Gil Sung,et al.  Design and Control of a MR Shock Absorber for Electronic Control Suspension , 2011 .

[19]  Jonathan W. Bender,et al.  Properties and Applications of Commercial Magnetorheological Fluids , 1998, Smart Structures.

[20]  Walid H. El-Aouar.  Finite Element Analysis Based Modeling of Magneto Rheological Dampers , 2002 .

[21]  Freygardur Thorsteinsson,et al.  A geometrical optimization of a magneto-rheological rotary brake in a prosthetic knee , 2010 .

[22]  Weihua Li,et al.  Design and Experimental Evaluation of a Magnetorheological Brake , 2003 .

[23]  C. Rogers,et al.  Magnetorheological Fluids: Materials, Characterization, and Devices , 1996 .

[24]  J. D. Carlson,et al.  COMMERCIAL MAGNETO-RHEOLOGICAL FLUID DEVICES , 1996 .

[25]  Dong-Soo Kwon,et al.  Modeling of a Magnetorheological Actuator Including Magnetic Hysteresis , 2003 .

[26]  Young-Pil Park,et al.  H8 Control Performance of a Full-Vehicle Suspension Featuring Magnetorheological Dampers , 2002 .

[27]  Weihua Li,et al.  Development of an MR-brake-based haptic device , 2006 .

[28]  Yong Woon Park,et al.  Federated-filter-based unmanned ground vehicle localization using 3D range registration with digital elevation model in outdoor environments , 2012, J. Field Robotics.

[29]  H. Du,et al.  Finite Element Analysis and Simulation Evaluation of a Magnetorheological Valve , 2003 .