Fabrication of niobium carbide coating on niobium by interstitial carburization

[1]  Yunhua Xu,et al.  A key to tune the grain size gradient of the TiC coating on titanium by interstitial carburization: The timing for pressing , 2020 .

[2]  Yunhua Xu,et al.  Fabrication of TaC coating on tantalum by interstitial carburization , 2019, Journal of Alloys and Compounds.

[3]  Jingjie Guo,et al.  Microstructure and high temperature compressive properties of Nb-based alloys fabricated by plasma arc-induction hybrid melting , 2019, Materials Research Express.

[4]  Hongwei Xie,et al.  Electrochemically assisted carbonization of Nb in molten salt , 2019, Surface and Coatings Technology.

[5]  M. Fu,et al.  HRTEM observation of silicides and Laves phase precipitates in Nb-Ti-Si based alloys , 2019, International Journal of Refractory Metals and Hard Materials.

[6]  Dexin Yang,et al.  Fabrication of Mo2C coating on molybdenum by contact solid carburization , 2018, Applied Surface Science.

[7]  Yufeng Zheng,et al.  Osteoimmunomodulation, osseointegration, and in vivo mechanical integrity of pure Mg coated with HA nanorod/pore-sealed MgO bilayer. , 2018, Biomaterials science.

[8]  Q. Fu,et al.  Oxidation response determined by multiphase-dependent melting degree of plasma sprayed MoSi2 on Nb-based alloy , 2018, Journal of Alloys and Compounds.

[9]  M. Fu,et al.  Precipitation of γNb5Si3 in Nb-Si based ultrahigh temperature alloys , 2018, Intermetallics.

[10]  Yunhua Xu,et al.  New strategy to grow TiC coatings on titanium alloy: Contact solid carburization by cast iron , 2018 .

[11]  Yu Zhou,et al.  An Nb2O5-SiO2-Al2O3/NbSi2/Nb5Si3 multilayer coating on Nb-Hf alloy to improve oxidation resistance , 2018 .

[12]  Q. Fu,et al.  A long-term ultrahigh temperature application of layered silicide coated Nb alloy in air , 2018 .

[13]  Changliang Wang,et al.  Microstructure and oxidation behavior of Mo-Si-Al coating on Nb-based alloy , 2018 .

[14]  A. Arya,et al.  Formation mechanism of stable NbC carbide phase in Nb-1Zr-0.1C (wt.%) alloy , 2018 .

[15]  Ye Tang,et al.  Flow softening behavior during hot compression of a Nb-Si based ultrahigh temperature alloy , 2018 .

[16]  Yan-qiang Qiao,et al.  Comparison of two kinds of Si-B-Y co-deposition coatings on an Nb-Ti-Si based alloy by pack cementation method , 2017 .

[17]  M. Fu,et al.  Crystallographic characteristics of an integrally directionally solidified Nb-Ti-Si based in-situ composite , 2017 .

[18]  H. Fraser,et al.  Formation mechanism of the Nb2C phase in the Nb–1Zr–0.1C (wt.%) alloy and interrelation between γ, β and α-Nb2C carbide phases , 2016 .

[19]  S. Yi,et al.  Simultaneous coating of Si and B on Nb–Si–B alloys by a halide activated pack cementation method and oxidation behaviors of the alloys with coatings at 1100 °C , 2015 .

[20]  H. Fraser,et al.  Characterization of silicide phases formed during pack siliconizing coating on the Nb-1Zr-0.1C alloy , 2015 .

[21]  R. C. Hubli,et al.  Isothermal oxidation behavior and growth kinetics of silicide coatings formed on Nb–1Zr–0.1C alloy , 2015 .

[22]  Maoyuan Li,et al.  Development of silicide coatings over Nb–NbCr2 alloy and their oxidation behavior at 1250 °C , 2014 .

[23]  Yong Han,et al.  Formation mechanism, degradation behavior, and cytocompatibility of a nanorod-shaped HA and pore-sealed MgO bilayer coating on magnesium. , 2014, ACS applied materials & interfaces.

[24]  M. Tarselli.  Subtle niobium. , 2014, Nature chemistry.

[25]  S. Yi,et al.  Oxidation behavior of Nb–Si–B alloys with the NbSi2 coating layer formed by a pack cementation technique , 2013 .

[26]  C. M. Lepienski,et al.  Surface modification of pure niobium by plasma nitriding , 2013 .

[27]  M. Benachour,et al.  Avaliation of gas phase kinetics of the carburization and deactivation reactions aimed to produce NbC , 2012 .

[28]  Ping Zhang,et al.  A comparative study of two kinds of Y and Al modified silicide coatings on an Nb–Ti–Si based alloy prepared by pack cementation technique , 2011 .

[29]  Yunhua Xu,et al.  In situ fabrication of titanium carbide particulates-reinforced iron matrix composites , 2011 .

[30]  Kihwan Kim,et al.  Characterization of Ceramic Plasma-Sprayed Coatings, and Interaction Studies Between U-Zr Fuel and Ceramic Coated Interface at an Elevated Temperature , 2011 .

[31]  F. Ye,et al.  Study on NbC particulate-reinforced iron matrix composite produced in situ , 2011 .

[32]  A. K. Suri,et al.  Deposition of aluminide and silicide based protective coatings on niobium , 2010 .

[33]  Jianbo Wang,et al.  The crystallography of continuous precipitates with a newly observed orientation relationship in an Mg–Al-based alloy , 2009 .

[34]  R. H. Titran,et al.  Processing and microstructure of Nb‐1% Zr‐0.1% C alloy sheet , 2008 .

[35]  T. Konno,et al.  A TEM study on the semicoherent precipitates in a Nb–19%Mo alloy , 2005 .

[36]  Mohamed S. El-Genk,et al.  A review of refractory metal alloys and mechanically alloyed-oxide dispersion strengthened steels for space nuclear power systems , 2005 .

[37]  Mingxing Zhang,et al.  Crystallography of Mg17Al12 precipitates in AZ91D alloy , 2003 .

[38]  M. Audier,et al.  High-resolution electron microscopy observations of the interface structure of continuous precipitates in a Mg-Al alloy and interpretation with the O-lattice theory , 1995 .

[39]  E. M. Lyutyi,et al.  Structure and morphology of the hardening phase in an Nb-Zr-C alloy after strain aging at 900°C , 1978 .

[40]  E. M. Lyutyi,et al.  Kinetics of structural changes in an Nb-Zr-C alloy with prolonged holding under load at high temperatures , 1978 .