Design of a ultra-compact low-power rectenna in paper substrate for energy harvesting in the Wi-Fi band

This paper presents the design of a novel rectenna based on a tapered annular slot and a single-diode rectifier, optimized to operate in the Wi-Fi band and in presence of low input power (Pavs=-15 dBm). In order to obtain a compact layout a double-layer architecture has been considered, according to which the interior metal surface of the annular slot is employed as ground plane for the rectifying circuit placed on the other side of the substrate. As a result, a rectenna with an active area of only 40 × 33 mm2 and an efficiency included between 26.5 and 28% has been obtained. The antenna has been fabricated in paper substrate and tested in the anechoic chamber. Then, the rectifier has been designed and optimized within the Advanced Design System suite. Finally, the rectenna performance has been discussed and compared to the State of the Art (SoA).

[1]  L. Roselli,et al.  Modeling and characterization of copper tape microstrips on paper substrate and application to 24 GHz branch-line couplers , 2013, 2013 European Microwave Conference.

[2]  Apostolos Georgiadis,et al.  Conformal Hybrid Solar and Electromagnetic (EM) Energy Harvesting Rectenna , 2013, IEEE Transactions on Circuits and Systems I: Regular Papers.

[3]  Fang Zhang,et al.  Study of a novel compact rectenna for wireless energy harvesting , 2013, 2013 IEEE International Wireless Symposium (IWS).

[4]  Manos M. Tentzeris,et al.  Ambient RF Energy-Harvesting Technologies for Self-Sustainable Standalone Wireless Sensor Platforms , 2014, Proceedings of the IEEE.

[5]  Giulia Orecchini,et al.  Low-Power Frequency Doubler in Cellulose-Based Materials for Harmonic RFID Applications , 2014, IEEE Microwave and Wireless Components Letters.

[6]  D. Lin,et al.  All Polarization Receiving Rectenna With Harmonic Rejection Property for Wireless Power Transmission , 2014, IEEE Transactions on Antennas and Propagation.

[7]  M. Tentzeris,et al.  Circularly polarized shorted ring slot rectenna with a mesh design for optimized inkjet printing on paper substrate , 2015, 2015 9th European Conference on Antennas and Propagation (EuCAP).

[8]  Apostolos Georgiadis,et al.  Boosting the Efficiency: Unconventional Waveform Design for Efficient Wireless Power Transfer , 2015, IEEE Microwave Magazine.

[9]  Luca Roselli,et al.  Design of a novel antenna system intended for harmonic RFID tags in paper substrate , 2015, 2015 IEEE Wireless Power Transfer Conference (WPTC).

[10]  L. Roselli,et al.  Review of the present technologies concurrently contributing to the implementation of the Internet of Things (IoT) paradigm: RFID, Green Electronics, WPT and Energy Harvesting , 2015, 2015 IEEE Topical Conference on Wireless Sensors and Sensor Networks (WiSNet).