Theoretical study on an integrated two-stage cascaded thermoelectric module operating with dual power sources

Abstract This paper presents an integrated two-stage cascaded thermoelectric module (TTEM) operating with dual power source. The integrated TTEM contains two stages of thermocouples with identical semiconductor cross-sectional area but different leg lengths. An analytical model for the TTEM is developed, and the influences of the key parameters are theoretically investigated. The obtained results indicate that optimum two stage currents combination can maximize both the cooling capacity and coefficient of performance (COP). Furthermore, the leg length allocation ratio for the two stages affects the maximum cooling capacity significantly. Larger leg length proportion of the colder stage may effectively contribute to the improvement in maximum cooling capacity. In addition, there exists an optimum leg length allocation ratio to obtain the corresponding optimum COP when the two stage currents are set to achieve the maximum cooling capacity of the TTEM. However, the total leg length has no effect on the corresponding optimum COP.

[1]  Gholamreza Karimi,et al.  Performance analysis of multi-stage thermoelectric coolers , 2011 .

[2]  Yi-Hsiang Cheng,et al.  Maximizing the cooling capacity and COP of two-stage thermoelectric coolers through genetic algorithm , 2006 .

[3]  Fu Xiao,et al.  Investigation of a novel thermoelectric radiant air-conditioning system , 2013 .

[4]  Boris Abramzon.  Numerical Optimization of the Thermoelectric Cooling Devices , 2007 .

[5]  Yu-Wei Chang,et al.  Thermoelectric air-cooling module for electronic devices , 2009 .

[6]  Dan Ewing,et al.  Characterization of a thermoelectric cooler based thermal management system under different operating conditions , 2013 .

[7]  Nandy Putra,et al.  The characterization of a cascade thermoelectric cooler in a cryosurgery device. , 2010 .

[8]  D. Astrain,et al.  Development of a thermoelectric refrigerator with two-phase thermosyphons and capillary lift , 2009 .

[9]  Saffa Riffat,et al.  An investigation of thermoelectric cooling devices for small‐scale space conditioning applications in buildings , 2009 .

[10]  HoSung Lee,et al.  Optimal design of thermoelectric devices with dimensional analysis , 2013 .

[11]  Chin-Hsiang Cheng,et al.  Development of a non-uniform-current model for predicting transient thermal behavior of thermoelectric coolers , 2012 .

[12]  Antonio M. López,et al.  Modelling and simulation of a thermoelectric structure with pellets of non-standard geometry and materials , 2013 .

[13]  Qiu-Hong Wang,et al.  Performance analysis of two-stage TECs (thermoelectric coolers) using a three-dimensional heat-electricity coupled model , 2014 .

[14]  Fengrui Sun,et al.  Performance optimization for a two-stage thermoelectric heat-pump with internal and external irreversibilities , 2008 .

[15]  Lingai Luo,et al.  Optimization of thermoelectric heat pumps by operating condition management and heat exchanger design , 2012 .

[16]  Chin-Hsiang Cheng,et al.  Geometry optimization of thermoelectric coolers using simplified conjugate-gradient method , 2013 .

[17]  Optimized Thermoelectric Refrigeration in the Presence of Thermal Boundary Resistance , 2009 .

[18]  Aliakbar Akbarzadeh,et al.  Experimental study of a thermoelectrically-driven liquid chiller in terms of COP and cooling down period , 2014 .

[19]  Saffa Riffat,et al.  Improving the coefficient of performance of thermoelectric cooling systems: a review , 2004 .

[20]  Raşit Ahiska,et al.  Computer controlled test system for measuring the parameters of the real thermoelectric module , 2011 .

[21]  Jianlin Yu,et al.  Enhancing the maximum coefficient of performance of thermoelectric cooling modules using internally cascaded thermoelectric couples. , 2009 .

[22]  Hengyun Zhang.  A general approach in evaluating and optimizing thermoelectric coolers , 2010 .

[23]  Shengwei Wang,et al.  The step-change cooling performance of miniature thermoelectric module for pulse laser , 2014 .

[24]  Y. C. Mui,et al.  Analysis of thermoelectric cooler performance for high power electronic packages , 2010 .

[25]  Christophe Goupil,et al.  Comparison of different modeling approaches for thermoelectric elements , 2013 .