Removing prior particle boundaries in a powder superalloy based on the interaction between pulsed electric current and chain-like structure

[1]  Weifu Li,et al.  High throughput experiment assisted discovery of new Ni-base superalloys , 2020 .

[2]  M. Zhan,et al.  Electron force-induced dislocations annihilation and regeneration of a superalloy through electrical in-situ transmission electron microscopy observations , 2020 .

[3]  Wenjun Lu,et al.  Reconstructing the decomposed ferrite phase to achieve toughness regeneration in a duplex stainless steel , 2020 .

[4]  A. Steuwer,et al.  Microstructure-dependent deformation behaviour of a low γ′ volume fraction Ni-base superalloy studied by in-situ neutron diffraction , 2020 .

[5]  Zhang Xinfang,et al.  Regulating the Non-Metallic Inclusions by Pulsed Electric Current in Molten Metal , 2020 .

[6]  Huiping Li,et al.  EBSD study of the effect of electropulsing treatment on the microstructure evolution in a typical cold-deformed Ni-based superalloy , 2019 .

[7]  X. F. Zhang,et al.  Current-driving dissolution of nanoscale brittle precipitates produced by spinodal decomposition in FeCrAl alloys , 2019, Journal of Alloys and Compounds.

[8]  Yunping Li,et al.  Tensile properties of three newly developed Ni-base powder metallurgy superalloys , 2019, Journal of Alloys and Compounds.

[9]  M. Hardy,et al.  Comparison of experimental and predicted TCP solvus temperatures in Ni-base superalloys , 2019, Journal of Alloys and Compounds.

[10]  Jun Gao,et al.  Modification of Corrosion Resistance of the Plain Carbon Steels by Pulsed Electric Current , 2018, Acta Metallurgica Sinica (English Letters).

[11]  Xinfang Zhang,et al.  Exploring the Particle Reconfiguration in the Metallic Materials under the Pulsed Electric Current , 2018 .

[12]  Kui Liu,et al.  Effect of long-term aging on the microstructure, stress rupture properties and deformation mechanisms of a new cast nickel base superalloy , 2018, Materials Science and Engineering: A.

[13]  Xuebing Liu,et al.  An ultrafast performance regeneration of aged stainless steel by pulsed electric current , 2018, Scripta Materialia.

[14]  Jun Gao,et al.  Hot Tensile Behaviors and Microstructure Evolution of Ti-6Al-4V Titanium Alloy Under Electropulsing , 2018, Acta Metallurgica Sinica (English Letters).

[15]  Zhipeng Guo,et al.  Morphology evolution of γ′ precipitates in a powder metallurgy Ni-base superalloy , 2018 .

[16]  Lei Wang,et al.  New approach for plastic deformation behavior of GH4169 superalloy with in-situ electric-pulse current at 800 °C , 2017 .

[17]  S. Biamino,et al.  Influence of solutioning on microstructure and hardness of hot isostatically pressed Astroloy , 2017 .

[18]  R. Qin,et al.  Morphology and Orientation Selection of Non-metallic Inclusions in Electrified Molten Metal , 2017, Metallurgical and Materials Transactions B.

[19]  Yunrong Zheng,et al.  Microstructural nature and stability of Co-rich TCP phases in Ru-containing single crystal superalloys , 2017 .

[20]  R. Qin Using electric current to surpass the microstructure breakup limit , 2017, Scientific reports.

[21]  F. Dunne,et al.  Mechanistic behaviour and modelling of creep in powder metallurgy FGH96 nickel superalloy , 2016 .

[22]  B. Ma,et al.  Electropulsing induced evolution of grain-boundary precipitates without loss of strength in the 7075 Al alloy , 2015 .

[23]  Rongshan Qin,et al.  Computational thermodynamics in electric current metallurgy , 2015 .

[24]  Jianguo Lin,et al.  A study of direct forging process for powder superalloys , 2015 .

[25]  S. Wei,et al.  Effect of electrical pulse on the precipitates and material strength of 2024 aluminum alloy , 2014 .

[26]  H. Bhadeshia,et al.  Austenite grain growth in a nuclear pressure vessel steel , 2013 .

[27]  L. Tang,et al.  Influence of TCP phase and its morphology on creep properties of single crystal nickel-based superalloys , 2010 .

[28]  C. Shek,et al.  On the thermodynamics and kinetics of electropulsing induced dissolution of β-Mg17Al12 phase in an aged Mg–9Al–1Zn alloy , 2009 .

[29]  Xiukun Wu,et al.  Segregation of lead in Cu–Zn alloy under electric current pulses , 2006 .

[30]  D. S. Sarma,et al.  Influence of modified processing on structure and properties of hot isostatically pressed superalloy Inconel 718 , 2006 .

[31]  D. S. Sarma,et al.  Effect of thermomechanical working on the microstructure and mechanical properties of hot isostatically pressed superalloy inconel 718 , 2004 .

[32]  D. S. Sarma,et al.  Effect of solution treatment temperature on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel* 718 , 2004 .

[33]  Helen V. Atkinson,et al.  Fundamental aspects of hot isostatic pressing: An overview , 2000 .

[34]  H. Conrad Effects of electric current on solid state phase transformations in metals , 2000 .

[35]  T. Elperin,et al.  Peculiarities of coexistence of phases with different electric conductivities under the influence of electric current , 2000 .

[36]  Mao Jian,et al.  Effects of heat treatment on prior particle boundary precipitation in a powder metallurgy nickel base superalloy , 1995 .

[37]  Sahu,et al.  High-pressure and high-temperature electrical resistivity of ferromagnetic transition metals: Nickel and iron. , 1986, Physical review. B, Condensed matter.

[38]  R. Thamburaj,et al.  Microstructures and mechanical properties of hot isostatically pressed powder metallurgy Alloy APK-1 , 1983 .

[39]  P. S. Kislyi,et al.  The electrical properties of chromium borides, carbides, and nitrides , 1962 .