Application of Static Charge Dissipation to Mitigate Electric Discharge Bearing Currents

Today, the physical cause-and-effect chains of inverter-induced high-frequency bearing current have been well understood, but little has been known on not only theoretically possible, but cost-effective mitigation techniques for a certain drive configuration. This paper focuses on the mitigation of discharge bearing currents, which occur predominantly with smaller motors of up to several kWs. We present a new mitigation technique where any voltage build-up across the bearing is discharged via static charge dissipation through a parallel path before an electric breakdown inside the bearing occurs. The technique is based on the field emission effect, has no direct frictional wear, is free of maintenance, and robust towards contamination.

[1]  A. Muetze,et al.  Don’t lose your bearings – Mitigation techniques for bearing currents in inverter-supplied drive systems , 2006 .

[2]  H. Raether.  Electron avalanches and breakdown in gases , 1964 .

[3]  A. Wallace,et al.  An evaluation of mitigation techniques for bearing currents, EMI and over-voltages in ASD applications , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[4]  J. Erdman,et al.  Effect of PWM inverters on AC motor bearing currents and shaft voltages , 1996 .

[5]  Annette Muetze,et al.  Practical Rules for Assessment of Inverter-Induced Bearing Currents in Inverter-Fed AC Motors up to 500 kW , 2007, IEEE Transactions on Industrial Electronics.

[6]  Doyle F. Busse,et al.  The effects of PWM voltage source inverters on the mechanical performance of rolling bearings , 1997 .

[7]  Larry Levit,et al.  Electrical breakdown and ESD phenomena for devices with nanometer-to-micron gaps , 2003, SPIE MOEMS-MEMS.

[8]  A. Binder,et al.  Experimental evaluation of mitigation techniques for bearing currents in inverter-supplied drive-systems - investigations on induction motors up to 500 kW , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..

[9]  J. Meek,et al.  Electrical breakdown of gases , 1953 .

[10]  Annette Mütze,et al.  Bearing Currents in Inverter-fed AC-motors , 2004 .

[11]  D. W. Schlegel,et al.  Experience with variable frequency drives and motor bearing reliability , 1998, Record of Conference Papers. IEEE Industry Applications Society 45th Annual Petroleum and Chemical Industry Conference (Cat. No.98CH36234).

[12]  F. Paschen,et al.  Ueber die zum Funkenübergang in Luft, Wasserstoff und Kohlensäure bei verschiedenen Drucken erforderliche Potentialdifferenz , 1889 .

[13]  C. Spindt,et al.  Physical properties of thin‐film field emission cathodes with molybdenum cones , 1976 .

[14]  R. Gomer,et al.  Field Emission and Field Ionization , 1961 .

[15]  R. Schiferl,et al.  Circuit model for shaft voltage prediction in induction motors fed by PWM-based AC drives , 2003 .

[16]  Doyle F. Busse,et al.  Characteristics of shaft voltage and bearing currents , 1997 .

[17]  An Equation for Charge Decay Valid in Both Conductors and Insulators , 2008, 0801.4182.

[18]  Doyle F. Busse,et al.  Bearing currents and their relationship to PWM drives , 1997 .

[19]  A. Binder,et al.  Calculation of motor capacitances for prediction of discharge bearing currents in machines of inverter-based drive systems , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[20]  Thomas A. Lipo,et al.  Modeling of motor bearing currents in PWM inverter drives , 1995 .

[21]  R.-T. Lee,et al.  Arc erosion behaviour of silver electric contacts in a single arc discharge across a static gap , 2001 .

[22]  I. Gallimberti,et al.  The mechanism of the long spark formation , 1979 .

[23]  B. S. Gossling,et al.  Further studies in the emission of electrons from cold metals , 1929 .

[24]  M.J. Melfi,et al.  Bearing current remediation options , 2004, IEEE Industry Applications Magazine.

[25]  P. Slade,et al.  Electrical breakdown in atmospheric air between closely spaced (0.2 /spl mu/m-40 /spl mu/m) electrical contacts , 2001 .

[26]  H. E. Boyanton,et al.  Bearing fluting [motors] , 2002 .

[27]  P. J. Link,et al.  Minimizing electric bearing currents in ASD systems , 1999 .

[28]  Doyle F. Busse,et al.  System electrical parameters and their effects on bearing currents , 1997 .

[29]  R. Fowler,et al.  Electron Emission in Intense Electric Fields , 1928 .

[30]  R. Dhariwal,et al.  Electric field breakdown at micrometre separations , 1999 .