Short-term storage systems of thermal energy for buildings: a review

Thermal energy storage in buildings is essential to reduce energy consumption, to switch electrical consumption from on-peak period to off-peak period and to develop the use of intermittent renewable energy sources. Several systems designed to store thermal energy on a short-term scale (maximum a few days of storage) are presented in previous publications. However, there are no available comparisons of these systems and their conditions of use. This paper details these different designs for short-term scale thermal energy storage, regarding (i) their passive or active nature, (ii) their usage conditions and (iii) their performances. In the first section, the thermal properties of materials are listed. In particular, advantages and problems associated with phase change materials are presented. Subsequently, thermal storage systems are presented in two parts, on the one hand, passive systems and on the other hand active systems, according to the fluid used. For each system, the advantages of substituting sensible storage with latent storage are highlighted. Furthermore, an original and comparative analysis of published studies attempts to define some criteria and requirements for efficient use of latent storage. This review demonstrates that an exhaustive comparison of the systems encounters difficulties, due to the differences between the studies with respect to experimental measurements and weather data and the lack of similar comparison criteria, such as decrement factor, efficiency and cost.

[1]  William A. Beckman,et al.  Solar Engineering of Thermal Processes, 2nd ed. , 1994 .

[2]  A. Bontemps,et al.  Experimental and modelling study of twin cells with latent heat storage walls , 2011 .

[3]  Donald E. Beasley,et al.  Optimization of a Packed Bed Thermal Energy Storage Unit , 1987 .

[4]  Clive B. Beggs.  The economics of ice thermal storage , 1991 .

[5]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part II: cool thermal storage , 1998 .

[6]  Min Xiao,et al.  Preparation and performance of shape stabilized phase change thermal storage materials with high thermal conductivity , 2002 .

[7]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[8]  David Reay,et al.  Novel ventilation system for reducing air conditioning in buildings. Part II: testing of prototype , 2001 .

[9]  Kambiz Vafai,et al.  Thermal charging and discharging of sensible and latent heat storage packed beds , 1991 .

[10]  Ibrahim Dincer,et al.  On thermal energy storage systems and applications in buildings , 2002 .

[11]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[12]  C. Benard,et al.  Experimental comparison of latent and sensible heat thermal walls , 1985 .

[13]  Xin Wang,et al.  New concepts and approach for developing energy efficient buildings: Ideal specific heat for building internal thermal mass , 2011 .

[14]  Wenxian Lin,et al.  Numerical simulation of three-dimensional flow dynamics in a hot water storage tank , 2009 .

[15]  Peter Schossig,et al.  Micro-encapsulated phase-change materials integrated into construction materials , 2005 .

[16]  Frédéric Kuznik,et al.  A review on phase change materials integrated in building walls , 2011 .

[17]  A. Lázaro,et al.  PCM–air heat exchangers for free-cooling applications in buildings: Experimental results of two real-scale prototypes , 2009 .

[18]  Robert F. Boehm,et al.  Passive building energy savings: A review of building envelope components , 2011 .

[19]  H. Weinlaeder,et al.  Monitoring results of an interior sun protection system with integrated latent heat storage , 2011 .

[20]  Ibrahim Dincer,et al.  Potential use of cold thermal energy storage systems for better efficiency and cost effectiveness , 2010 .

[21]  Takuji Nakamura,et al.  Study of a floor supply air conditioning system using granular phase change material to augment building mass thermal storage—Heat response in small scale experiments , 2006 .

[22]  Utilisation d'un matériau à changement de phase dans un mur Trombe sans thermocirculation , 1982 .

[23]  D. E. Knebel,et al.  Cost effective thermal energy storage , 1991 .

[24]  Wasim Saman,et al.  Thermal performance of PCM thermal storage unit for a roof integrated solar heating system , 2005 .

[25]  D. Feldman,et al.  Energy-Storing Wallboard: Flammability Tests , 1998 .

[26]  Ibrahim Dincer,et al.  Effect of stratification on energy and exergy capacities in thermal storage systems , 2004 .

[27]  E. Blanco,et al.  Energy performance of an open-joint ventilated façade compared with a conventional sealed cavity façade , 2011 .

[28]  Andreas K. Athienitis,et al.  The effect of solar radiation on dynamic thermal performance of floor heating systems , 2000 .

[29]  Laurent Zalewski,et al.  Etude thermique expérimentale et simulation numérique d'un mur solaire composite : optimisation des performances énergétiques , 1996 .

[30]  Abdul Jabbar N. Khalifa,et al.  A comparative performance study of some thermal storage materials used for solar space heating , 2009 .

[31]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[32]  André Bontemps,et al.  Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material , 2006 .

[33]  L. Bourdeau.  Study of two passive solar systems containing phase change materials for thermal storage , 1980 .

[34]  Ye Hong,et al.  Preparation of polyethylene–paraffin compound as a form-stable solid-liquid phase change material , 2000 .

[35]  C. E. Dorgan,et al.  ASHRAE's new design guide for cool thermal storage , 1994 .

[36]  Marcel Lacroix,et al.  A hybrid thermal energy storage system for managing simultaneously solar and electric energy , 2006 .

[37]  T. Knowles,et al.  Proportioning composites for efficient thermal storage walls , 1983 .

[38]  E. Ghanbari,et al.  Obtaining an energy storing building material by direct incorporation of an organic phase change material in gypsum wallboard , 1991 .

[39]  P. N. Surendran,et al.  Influence of active heat sinks on fabric thermal storage in building mass , 2001 .

[40]  Jiang Yi,et al.  Modeling and experimental study on an innovative passive cooling system—NVP system , 2003 .

[41]  I. Dincer,et al.  Exergy methods for assessing and comparing thermal storage systems , 2003 .

[42]  D. Feldman,et al.  Energy storage composite with an organic PCM , 1989 .

[43]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part I: heat storage materials and techniques , 1998 .

[44]  L. Bourdeau,et al.  Captage et stockage d'énergie solaire dans l'habitat par le moyen de mur diode à chaleur latente , 1980 .

[45]  Yuan Hu,et al.  Preparation and flammability of high density polyethylene/paraffin/organophilic montmorillonite hybrids as a form stable phase change material , 2007 .

[46]  L. Cabeza,et al.  Free-cooling of buildings with phase change materials , 2004 .

[47]  Yi Jiang,et al.  Preparation, thermal performance and application of shape-stabilized PCM in energy efficient buildings , 2006 .

[48]  C. Bales,et al.  Analysis of System Reports of Task 26 for Sensitivity of Parameters , 2007 .

[49]  D. W. Etheridge,et al.  Novel ventilation cooling system for reducing air conditioning in buildings.: Part I: testing and theoretical modelling , 2000 .

[50]  R. Velraj,et al.  Experimental investigation on a combined sensible and latent heat storage system integrated with constant/varying (solar) heat sources , 2007 .

[51]  Arif Hepbasli,et al.  Energetic and exergetic analysis and assessment of a thermal energy storage (TES) unit for building applications , 2010 .

[52]  Arild Gustavsen,et al.  Phase Change Materials for Building Applications: A State-of-the-Art Review , 2010 .

[53]  F. Kuznik,et al.  Experimental assessment of a phase change material for wall building use , 2009 .

[54]  Simon Furbo,et al.  Multilayer fabric stratification pipes for solar tanks , 2007 .

[55]  Katsunori Nagano,et al.  Thermal characteristics of a direct heat exchange system between granules with phase change material and air , 2004 .

[56]  J. K. Nayak.  Transwall versus trombe wall: Relative performance studies , 1987 .

[57]  Francis Allard,et al.  Night ventilation for building cooling in summer , 1997 .

[58]  Meng Zhang,et al.  On the heat transfer rate reduction of structural insulated panels (SIPs) outfitted with phase change materials (PCMs) , 2008 .

[59]  Uroš Stritih,et al.  Solar heat storage wall for building ventilation , 1996 .

[60]  V. V. Tyagi,et al.  PCM thermal storage in buildings: A state of art , 2007 .

[61]  W. P. Bahnfleth,et al.  Field-measured performance of four full-scale cylindrical stratified chilled-water thermal storage tanks , 1999 .

[62]  C. Seck.  Analyse et modélisation du comportement thermique d'un système de préchauffage d'air neuf pour l'habitat, intégrant un matériau à changement de phase , 2010 .

[63]  Luisa F. Cabeza,et al.  Dimensionless numbers used to characterize stratification in water tanks for discharging at low flow rates. , 2010 .

[64]  Xu Liu,et al.  Experimental study on cool storage air-conditioning system with spherical capsules packed bed , 2010 .

[65]  Xin Wang,et al.  Influence of additives on thermal conductivity of shape-stabilized phase change material , 2006 .

[66]  Simon Furbo,et al.  Methods to determine stratification efficiency of thermal energy storage processes – Review and theoretical comparison , 2009 .

[67]  P. Pinel,et al.  A review of available methods for seasonal storage of solar thermal energy in residential applications , 2011 .

[68]  Yuan Hu,et al.  Preparation, thermal and flammability properties of a novel form-stable phase change materials based on high density polyethylene/poly(ethylene-co-vinyl acetate)/organophilic montmorillonite nanocomposites/paraffin compounds , 2008 .

[69]  G. Fang,et al.  Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material , 2010 .

[70]  R. Velraj,et al.  Review of solar cooling methods and thermal storage options , 2011 .

[71]  Yuan Hu,et al.  Synergistic effect of iron and intumescent flame retardant on shape-stabilized phase change material , 2009 .

[72]  Z. Younsi.  Étude expérimentale et numérique du comportement thermique de matériaux à changement de phase : intégration dans un composant solaire passif pour l'habitat , 2008 .

[73]  Zhu Neng,et al.  Experimental study and evaluation of latent heat storage in phase change materials wallboards , 2007 .

[74]  Min Xiao,et al.  Thermal performance of a high conductive shape-stabilized thermal storage material , 2001 .

[75]  Bin Chen,et al.  Chinese kang as a domestic heating system in rural northern China—A review , 2009 .

[76]  M. Kanoğlu,et al.  Effect of obstacles on thermal stratification in hot water storage tanks , 2005 .

[77]  B. J. McCoy,et al.  Dynamic response of a packed bed thermal storage system—a model for solar air heating , 1982 .

[78]  Ibrahim Dincer,et al.  Energetic, environmental and economic aspects of thermal energy storage systems for cooling capacity , 2001 .

[79]  Daniel Castro-Fresno,et al.  Review of seasonal heat storage in large basins: Water tanks and gravel–water pits , 2010 .

[80]  Ahmet Sarı,et al.  Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal properties , 2004 .

[81]  S. Kanev,et al.  Thermophysical properties of some paraffins applicable to thermal energy storage , 1992 .

[82]  Sašo Medved,et al.  Free cooling of a building using PCM heat storage integrated into the ventilation system , 2007 .

[83]  Hongfa Di,et al.  Application of latent heat thermal energy storage in buildings: State-of-the-art and outlook , 2007 .

[84]  H. Manz,et al.  TIM–PCM external wall system for solar space heating and daylighting , 1997 .

[85]  Francesco Leccese,et al.  Ventilated facades energy performance in summer cooling of buildings , 2003 .

[86]  Oliver Kornadt,et al.  Temperature reduction due to the application of phase change materials , 2008 .

[87]  Hong He,et al.  Preparation and application effects of a novel form-stable phase change material as the thermal storage layer of an electric floor heating system , 2009 .

[88]  Michael W. Jack,et al.  Thermodynamic optimization of a stratified thermal storage device , 2009 .

[89]  Guiyin Fang,et al.  Dynamic performances of solar heat storage system with packed bed using myristic acid as phase change material , 2011 .

[90]  Luisa F. Cabeza,et al.  Use of microencapsulated PCM in concrete walls for energy savings , 2007 .

[91]  Joseph Virgone,et al.  Energetic efficiency of room wall containing PCM wallboard: A full-scale experimental investigation , 2008 .

[92]  I. O. Salyer,et al.  Phase Change Katerials For Heating And Cooling Of Residential Buildings And Other Applications , 1990, Proceedings of the 25th Intersociety Energy Conversion Engineering Conference.

[93]  L. Cabeza,et al.  PCM-module to improve hot water heat stores with stratification , 2003 .

[94]  Luisa F. Cabeza,et al.  Heat transfer enhancement in water when used as PCM in thermal energy storage , 2002 .

[95]  Ruzhu Wang,et al.  Thermal stratification within the water tank , 2009 .

[96]  Alessandro Carbonari,et al.  Numerical and experimental analyses of PCM containing sandwich panels for prefabricated walls , 2006 .

[97]  A. R. Balakrishnan,et al.  Transient analysis of energy storage in a thermally stratified water tank , 1998 .

[98]  Andreas K. Athienitis,et al.  Investigation of the Thermal Performance of a Passive Solar Test-Room with Wall Latent Heat Storage , 1997 .

[99]  L. Cabeza,et al.  Experimentation with a water tank including a PCM module , 2006 .

[100]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[101]  K. J. Maloney,et al.  A comparison study of one-dimensional models for stratified thermal storage tanks , 1989 .

[102]  Sašo Medved,et al.  Efficiency of free cooling using latent heat storage integrated into the ventilation system of a low energy building , 2007 .

[103]  M. Santamouris,et al.  Development and testing of PCM doped cool colored coatings to mitigate urban heat island and cool buildings , 2011 .

[104]  B. Olesen,et al.  Building Thermal Energy Storage - Concepts and Applications , 2011 .

[105]  S. C. Kaushik,et al.  DEVELOPMENT OF PHASE CHANGE MATERIALS BASED MICROENCAPSULATED TECHNOLOGY FOR BUILDINGS: A REVIEW , 2011 .

[106]  Sunliang Cao,et al.  State of the art thermal energy storage solutions for high performance buildings , 2010 .

[107]  Xu Xu,et al.  Experimental study of under-floor electric heating system with shape-stabilized PCM plates , 2005 .

[108]  Beat Lehmann,et al.  Development of a thermally activated ceiling panel with PCM for application in lightweight and retrofitted buildings , 2004 .

[109]  D. A. Neeper,et al.  Thermal dynamics of wallboard with latent heat storage , 2000 .

[110]  H. Inaba,et al.  Evaluation of thermophysical characteristics on shape-stabilized paraffin as a solid-liquid phase change material , 1997 .

[111]  J. Duffie,et al.  Analysis of collector-storage building walls using phase-change materials , 1991 .

[112]  Luisa F. Cabeza,et al.  Life cycle assessment of the inclusion of phase change materials (PCM) in experimental buildings , 2010 .

[113]  R. Velraj,et al.  Review on free cooling of buildings using phase change materials , 2010 .

[114]  K. Nagano,et al.  Development of a ventilation system utilizing thermal energy storage for granules containing phase change material , 2004 .

[115]  Lv Shilei,et al.  Impact of phase change wall room on indoor thermal environment in winter , 2006 .

[116]  Mohamed Amir,et al.  Comportement thermique de dalles chauffantes électriques pour le stockage quotidien , 1999 .

[117]  Luisa F. Cabeza,et al.  Immersion corrosion tests on metal‐salt hydrate pairs used for latent heat storage in the 32 to 36°C temperature range , 2001 .

[118]  U. Stritih,et al.  Experimental investigation of energy saving in buildings with PCM cold storage , 2010 .

[119]  Simon Furbo,et al.  Theoretical and experimental investigations of inlet stratifiers for solar storage tanks , 2005 .

[120]  L. Cabeza,et al.  Utilization of phase change materials in solar domestic hot water systems , 2009 .

[121]  Ibrahim Dincer.  Evaluation and selection of energy storage systems for solar thermal applications , 1999 .

[122]  Nasrudin Abd Rahim,et al.  Review of PCM based cooling technologies for buildings , 2012 .

[123]  P. M. Moretti,et al.  Stratified thermal storage tank inlet mixing characterization , 1988 .

[124]  Chris Bales,et al.  A method to determine stratification efficiency of thermal energy storage processes independently from storage heat losses , 2010 .

[125]  M. Hawlader,et al.  Microencapsulated PCM thermal-energy storage system , 2003 .

[126]  A. Maldonado,et al.  Physical properties of ZnO:F obtained from a fresh and aged solution of zinc acetate and zinc acetylacetonate , 2006 .

[127]  Aldo Steinfeld,et al.  High-temperature thermal storage using a packed bed of rocks - Heat transfer analysis and experimental validation , 2011 .

[128]  Mohammed M. Farid,et al.  A Review on Energy Conservation in Building Applications with Thermal Storage by Latent Heat Using Phase Change Materials , 2021, Thermal Energy Storage with Phase Change Materials.

[129]  Luisa F. Cabeza,et al.  State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization , 2010 .

[130]  Dorel Feldman,et al.  Latent heat storage in building materials , 1993 .

[131]  Azharul Karim.  Performance evaluation of a stratified chilled-water thermal storage system , 2009 .

[132]  Yuan Hu,et al.  Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change material , 2010 .

[133]  Ibrahim Dincer,et al.  Numerical heat transfer analysis of encapsulated ice thermal energy storage system with variable heat transfer coefficient in downstream , 2009 .

[134]  H. Brouwers,et al.  Experimental research on the use of micro-encapsulated Phase Change Materials to store solar energy in concrete floors and to save energy in Dutch houses , 2011 .

[135]  F. C. Porisini.  Salt hydrates used for latent heat storage: Corrosion of metals and reliability of thermal performance , 1988 .

[136]  D. E. Beasley,et al.  Transient response of a packed bed for thermal energy storage , 1983 .

[137]  Yvan Dutil,et al.  Experimental study of small-scale solar wall integrating phase change material , 2012 .

[138]  S. C. Solanki,et al.  An analysis of a packed bed latent heat thermal energy storage system using PCM capsules: Numerical investigation , 2009 .

[139]  Yuan Hu,et al.  Flammability and thermal properties of high density polyethylene/paraffin hybrid as a form‐stable phase change material , 2006 .

[140]  Nesreen Ghaddar,et al.  Numerical simulation of stratification behaviour in thermal storage tanks , 1989 .

[141]  M. E. Navarro,et al.  Effect of microencapsulated phase change material in sandwich panels , 2010 .

[142]  Mohamed Khayet,et al.  Experimental tile with phase change materials (PCM) for building use , 2011 .

[143]  M. Sakr,et al.  An experimental study of freezing and melting of water inside spherical capsules used in thermal energy storage systems , 2012 .

[144]  Martin Belusko,et al.  Roof integrated solar heating system with glazed collector , 2004 .

[145]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[146]  J. Kreider,et al.  Field measurement of chilled water storage thermal performance , 1989 .

[147]  D. Crandall,et al.  Segmented thermal storage , 2004 .

[148]  D. Feldman,et al.  Absorption of phase change materials in concrete , 1992 .

[149]  Jean-Pierre Bédécarrats,et al.  Phase-change thermal energy storage using spherical capsules: performance of a test plant , 1996 .