A quick auto-calibration approach based on normative energy models

Abstract When modeling the energy performance of existing buildings, model calibration always serves as an essential and necessary step to ensure the accuracy and applicability of building models. Model calibration for detailed energy models, which is also known as calibrated simulation (CS), refers to the process of tuning model's input parameters to narrow down the mismatch between the simulation result and the real-monitored data of building energy consumptions. Two major problems of current CS are: (1) a successful calibration requires HVAC domain knowledge of modelers. (2) Traditional building calibration process is labor-intensive and time-consuming. To solve these problems, a normative energy modeling based quick auto-calibration approach is proposed in this study. This approach is able to reduce the modeling time and simplify the calibration procedures. Firstly, this paper demonstrates the working principles and the credibility of Normative Energy Modeling (NEM). Then, the methodology of the proposed quick auto-calibration approach is elaborated. The energy performance model of a large hotel located in Shanghai, China with NEM is used as a case study to investigate the effectiveness of the proposed quick auto-calibration approach. The simulation result of the case study suggests that the proposed approach can significantly simplify the procedures of model calibrations while still achieve a good accuracy specified by ASHRAE Guideline 14 [1]. Besides, the results further confirm that such method requires much less time and computational power for modeling, compared with other counterparts (e.g., “Autotune” calibration [2]). With the advantage of speed and accuracy, the auto-calibration proposed in this paper is promising to be applied in both engineering and research field.

[1]  Marcus Bianchi,et al.  Verification and validation of EnergyPlus phase change material model for opaque wall assemblies , 2012 .

[2]  Oar,et al.  International Performance Measurement and Verification Protocol , 2014 .

[3]  Yacine Rezgui,et al.  Towards the next generation of smart grids: Semantic and holonic multi-agent management of distributed energy resources , 2017 .

[4]  Laurent Mora,et al.  Practical application of uncertainty analysis and sensitivity analysis on an experimental house , 2012 .

[5]  Wei Tian,et al.  A review of sensitivity analysis methods in building energy analysis , 2013 .

[6]  Christoph F. Reinhart,et al.  Adding advanced behavioural models in whole building energy simulation: A study on the total energy impact of manual and automated lighting control , 2006 .

[7]  Jack Edmonds,et al.  Matroids and the greedy algorithm , 1971, Math. Program..

[8]  Yeonsook Heo,et al.  Bayesian calibration of building energy models for energy retrofit decision-making under uncertainty , 2011 .

[9]  Richard J. Smith.  Use and misuse of the reduced major axis for line-fitting. , 2009, American journal of physical anthropology.

[10]  P Pieter-Jan Hoes,et al.  User behavior in whole building simulation , 2009 .

[11]  Xiufeng Pang,et al.  Model-based real-time whole building energy performance monitoring and diagnostics , 2014, Automated Diagnostics and Analytics for Buildings.

[12]  Guang Yang,et al.  Development of prototypical buildings for urban scale building energy modeling: A reduced order energy model approach , 2018 .

[13]  Shengwei Wang,et al.  A model-based online fault detection and diagnosis strategy for centrifugal chiller systems , 2005 .

[15]  Jiafang Song,et al.  Simulation and Analysis of a University Library Energy Consumption based on EQUEST , 2015 .

[16]  Bjarne W. Olesen,et al.  Occupants' window opening behaviour: A literature review of factors influencing occupant behaviour and models , 2012 .

[17]  P. Konečný.  Effect of the Number of Random Variables on Precision of Probability of failure Estimation using the Monte Carlo Simulation Method , 2010 .

[18]  Xing Lu,et al.  Electricity demand response in China: Status, feasible market schemes and pilots , 2016 .

[19]  Gulder Kemalbay,et al.  Effects of Multicollinearity on Electricity Consumption Forecasting using Partial Least Squares Regression , 2012 .

[20]  Sang Hoon Lee,et al.  The use of normative energy calculation beyond building performance rating , 2013 .

[21]  Gang Wu,et al.  Calibrated building energy simulation and its application in a high-rise commercial building in Shanghai , 2007 .

[22]  Zheng O'Neill,et al.  Evaluation of “Autotune” calibration against manual calibration of building energy models , 2016 .

[23]  Fredrik Karlsson,et al.  Measured and predicted energy demand of a low energy building: important aspects when using Building Energy Simulation , 2007 .

[24]  Pieter de Wilde,et al.  Identification of key factors for uncertainty in the prediction of the thermal performance of an office building under climate change , 2009 .

[25]  J. Kurnitski,et al.  Performance of EN ISO 13790 utilisation factor heat demand calculation method in a cold climate , 2007 .

[26]  L. Norford,et al.  Global sensitivity analysis of an urban microclimate system under uncertainty: Design and case study , 2017 .

[27]  Jian Sun,et al.  Calibration of Building Energy Simulation Programs Using the Analytic Optimization Approach (RP-1051) , 2006 .

[28]  Saffa Riffat,et al.  VALIDATION AND PARAMETRIC ANALYSIS OF ENERGYPLUS: AIR FLOW NETWORK MODEL USING CONTAM , 2008 .

[29]  Joseph C. Lam,et al.  Sensitivity analysis of energy performance of office buildings , 1996 .

[30]  David E. Claridge,et al.  Manual of Procedures for Calibrating Simulations of Building Systems , 2003 .

[31]  Paul Strachan,et al.  Practical application of uncertainty analysis , 2001 .

[32]  Jan Hensen,et al.  Building Performance Simulation for Design and Operation , 2019 .

[33]  Benjamin C. M. Fung,et al.  A systematic procedure to study the influence of occupant behavior on building energy consumption , 2011 .

[34]  Angel R. Martinez,et al.  : Exploratory data analysis with MATLAB ® , 2007 .

[35]  Daniel E. Fisher,et al.  EnergyPlus: creating a new-generation building energy simulation program , 2001 .

[36]  Peng Xu,et al.  Implementation of expansion planning in existing district energy system: A case study in China , 2018 .

[37]  Li Zhengwei,et al.  Preventive approach to determine sensor importance and maintenance requirements , 2013 .