Nominal strength of quasi-brittle open hole specimens under biaxial loading conditions

One of the main purposes for an accurate strength prediction is to get a reliable design tool of a given structure. Since most of aircraft and aerospace structures contain many holes and are subject to multidirectional loading conditions, due to stress concentration, cracks will necessarily emanate from these holes before failure. Therefore, the nominal strength prediction of open hole specimens under biaxial loading conditions is very necessary for the safe design of these structures. The main goal of this work is to develop an analytical model able to predict the nominal strength and the failure envelope of isotropic quasi-brittle open hole specimens under biaxial loading conditions. In this model, the nominal strength is analyzed taking into account the hole radius and the biaxiality load ratio. The model is formulated based on the cohesive zone model considering various shapes of the cohesive law. Other approaches such as the different methods of the critical distance theories are also presented and compared with the results of the cohesive crack model.

[1]  E. V. González,et al.  Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies , 2013 .

[2]  J. Whitney,et al.  Stress Fracture Criteria for Laminated Composites Containing Stress Concentrations , 1974 .

[3]  Constantinos Soutis,et al.  Stress and Failure Analysis of Composite Laminates with an Inclusion under Multiaxial Compression-Tension Loading , 2001 .

[4]  Michael R Wisnom,et al.  Size effects in the testing of fibre-composite materials , 1999 .

[5]  P. Camanho,et al.  A design methodology for mechanically fastened joints in laminated composite materials , 2006 .

[6]  Pedro P. Camanho,et al.  A damage model for the simulation of delamination in advanced composites under variable-mode loading , 2006 .

[7]  S. Tsai,et al.  Experimental studies of thin-ply laminated composites , 2007 .

[8]  Z. Bažant,et al.  Size effect on flexural strength of fiber-composite laminates , 2004 .

[9]  Dominique Leguillon,et al.  Strength or toughness? A criterion for crack onset at a notch , 2002 .

[10]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[11]  Wen-Liang Chen,et al.  Strength prediction of braided composite plates with a center hole , 2011 .

[12]  M. Anvari,et al.  Simulation of dynamic ductile crack growth using strain-rate and triaxiality-dependent cohesive elements , 2006 .

[13]  B. Rao,et al.  Comparison of fracture models to assess the notched strength of composite/solid propellant tensile specimens , 2004 .

[14]  P. Camanho,et al.  Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials , 2002 .

[15]  Nuno Dourado,et al.  Size effect in quasibrittle failure: Analytical model and numerical simulations using cohesive zone model , 2011 .

[16]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[17]  Alberto Carpinteri,et al.  Finite fracture mechanics: A coupled stress and energy failure criterion , 2006 .

[18]  Z. Bažant.  Concrete fracture models: testing and practice , 2002 .

[19]  Norman A. Fleck,et al.  Failure Prediction Technique for Compression Loaded Carbon Fibre-Epoxy Laminate with Open Holes , 1991 .

[20]  David Taylor,et al.  The fracture mechanics of finite crack extension , 2005 .

[21]  David Taylor,et al.  The Theory of Critical Distances: A New Perspective in Fracture Mechanics , 2010 .

[22]  Gro Markeset,et al.  Softening of concrete in compression — Localization and size effects , 1995 .

[23]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[24]  C. A. Cimini,et al.  Evaluation of Notched Strength of Composite Laminates for Structural Design , 2010 .

[25]  P. Camanho,et al.  Simulation of delamination by means of cohesive elements using an explicit finite element code , 2009 .

[26]  Pedro P. Camanho,et al.  A continuum damage model for composite laminates: Part II – Computational implementation and validation , 2007 .

[27]  V. Srivastava.  Notched strength prediction of laminated composite under tensile loading , 2002 .

[28]  Constantinos Soutis,et al.  Scaling effects in notched carbon fibre/epoxy composites loaded in compression , 2008 .

[29]  Alexander P. Suvorov,et al.  Size effect in fracture of unidirectional composite plates , 1999 .

[30]  T. Ogasawara,et al.  Experimental characterization of strength and damage resistance properties of thin-ply carbon fiber/toughened epoxy laminates , 2008 .

[31]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[32]  P. Linde,et al.  A finite fracture mechanics model for the prediction of the open-hole strength of composite laminates , 2012 .

[33]  J. D. Melo,et al.  Effects of an Open Hole on the Biaxial Strengths of Composite Laminates , 2010 .

[34]  J. J. Cheng,et al.  Cohesive zone with continuum damage properties for simulation of delamination development in fibre composites and failure of adhesive joints , 2008 .

[35]  S. C. Tan,et al.  Laminated Composites Containing an Elliptical Opening. I. Approximate Stress Analyses and Fracture Models , 1987 .

[36]  M. Elices,et al.  The cohesive zone model: advantages, limitations and challenges , 2002 .

[37]  Zdenek P. Bazant,et al.  Scaling of Structural Failure , 1997 .

[38]  Zhigang Suo,et al.  Remarks on Crack-Bridging Concepts , 1992 .

[39]  Constantinos Soutis,et al.  Measuring the notched compressive strength of composite laminates : Specimen size effects , 2008 .

[40]  N. Gascons,et al.  Size Effect Law and Critical Distance Theories to Predict the Nominal Strength of Quasibrittle Structures , 2013 .

[41]  Isaac M. Daniel,et al.  Behavior of graphite/epoxy plates with holes under biaxial loading , 1980 .

[42]  P. Camanho,et al.  Prediction of size effects in notched laminates using continuum damage mechanics , 2007 .

[43]  J. Renart,et al.  Nominal strength of quasi-brittle open hole specimens , 2012 .

[44]  F. J. Gómez,et al.  Generalizations and specializations of cohesive crack models , 2003 .

[45]  P. D. Soden,et al.  Predicting failure in composite laminates: the background to the exercise , 1998 .

[46]  J. Eisenmann,et al.  Macroscopic Fracture Mechanics of Advanced Composite Materials , 1971 .

[47]  G. I. Barenblatt.  The formation of equilibrium cracks during brittle fracture. General ideas and hypotheses. Axially-symmetric cracks , 1959 .

[48]  Michael R Wisnom,et al.  An experimental investigation into the tensile strength scaling of notched composites , 2007 .

[49]  David Taylor,et al.  The Theory of Critical Distances , 2007 .