Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures

[1]  Uwe Glatzel,et al.  Fracture toughness and fracture micromechanism in a cast AlCoCrCuFeNi high entropy alloy system , 2014 .

[2]  K. Dahmen,et al.  Temperature Effects on Deformation and Serration Behavior of High-Entropy Alloys (HEAs) , 2014 .

[3]  Yong Zhang,et al.  Phase Stability of Low-Density, Multiprincipal Component Alloys Containing Aluminum, Magnesium, and Lithium , 2014 .

[4]  Zhijun Wang,et al.  Phase Selection in High-Entropy Alloys: From Nonequilibrium to Equilibrium , 2014 .

[5]  George M. Pharr,et al.  Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys , 2014 .

[6]  Douglas L. Irving,et al.  Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy , 2013 .

[7]  Karin A. Dahmen,et al.  Aluminum Alloying Effects on Lattice Types, Microstructures, and Mechanical Behavior of High-Entropy Alloys Systems , 2013 .

[8]  G. Eggeler,et al.  The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy , 2013 .

[9]  E. George,et al.  Tensile properties of high- and medium-entropy alloys , 2013 .

[10]  W. Curtin,et al.  Friedel vs. Labusch: the strong/weak pinning transition in solute strengthened metals , 2013 .

[11]  B. S. Murty,et al.  Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy usi , 2013 .

[12]  T. Nieh,et al.  Incipient plasticity and dislocation nucleation of FeCoCrNiMn high-entropy alloy , 2013 .

[13]  Sheng Guo,et al.  Anomalous solidification microstructures in Co-free AlxCrCuFeNi2 high-entropy alloys , 2013 .

[14]  H. Bei,et al.  Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys , 2013 .

[15]  T. G. Nieh,et al.  Grain growth and the Hall–Petch relationship in a high-entropy FeCrNiCoMn alloy , 2013 .

[16]  Swastik Mondal,et al.  Investigation of phases in Al23Co15Cr23Cu8Fe15Ni16 and Al8Co17Cr17Cu8Fe17Ni33 high entropy alloys and comparison with equilibrium phases predicted by Thermo-Calc , 2013 .

[17]  L. Hector,et al.  Solute strengthening from first principles and application to aluminum alloys , 2012 .

[18]  S. K. Kim,et al.  Orientation dependence of twinning and strain hardening behaviour of a high manganese twinning induced plasticity steel with polycrystalline structure , 2011 .

[19]  D. Raabe,et al.  Dislocation and twin substructure evolution during strain hardening of an Fe-22 wt.% Mn-0.6 wt.% C TWIP steel observed by electron channeling contrast imaging , 2011 .

[20]  C. Woodward,et al.  Microstructure and Room Temperature Properties of a High-Entropy TaNbHfZrTi Alloy (Postprint) , 2011 .

[21]  D. Miracle,et al.  Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys , 2011 .

[22]  J. Banhart,et al.  Effect of decomposition of the Cr-Fe-Co rich phase of AlCoCrCuFeNi high entropy alloy on magnetic properties. , 2011, Ultramicroscopy.

[23]  B. S. Murty,et al.  Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy , 2011 .

[24]  P. Liaw,et al.  Refractory high-entropy alloys , 2010 .

[25]  V. Kuokkala,et al.  Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rate , 2010 .

[26]  L. Hector,et al.  Quantitative prediction of solute strengthening in aluminium alloys. , 2010, Nature materials.

[27]  M. Kanatzidis,et al.  Temperature-dependent elastic moduli of lead telluride-based thermoelectric materials , 2009 .

[28]  Kun Wang,et al.  Deformation twinning in polycrystalline copper at room temperature and low strain rate , 2006 .

[29]  G. Pharr,et al.  Elastic constants of single crystal Cr3Si and Cr–Cr3Si lamellar eutectic composites: a comparison of ultrasonic and nanoindentation measurements , 2004 .

[30]  B. Cantor,et al.  Microstructural development in equiatomic multicomponent alloys , 2004 .

[31]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[32]  Peter Neumann,et al.  Supra-Ductile and High-Strength Manganese-TRIP/TWIP Steels for High Energy Absorption Purposes , 2003 .

[33]  K. Vecchio,et al.  The influence of stacking fault energy on the mechanical behavior of Cu and Cu-Al alloys: Deformation twinning, work hardening, and dynamic recovery , 2001 .

[34]  S. Kalidindi,et al.  Strain hardening regimes and microstructural evolution during large strain compression of low stacking fault energy fcc alloys that form deformation twins , 1997 .

[35]  C. Davis,et al.  Modeling solid solution strengthening in nickel alloys , 1997 .

[36]  F. Nabarro.  Theoretical and experimental estimates of the Peierls stress , 1997 .

[37]  M. Shaw,et al.  Microstructural and mechanical influences on dynamic strain aging phenomena , 1994 .

[38]  Toshio Suzuki,et al.  The critical stress in a discrete Peierls–Nabarro model , 1994 .

[39]  M. Z. Butt,et al.  Low-temperature anomaly in the strength of copper-manganese alloy single crystals , 1990 .

[40]  D. Esterling,et al.  Computer simulation of solid solution strengthening in Fcc alloys: Part II. At absolute zero temperature , 1989 .

[41]  D. Esterling,et al.  Computer simulation of solid solution strengthening in Fcc alloys: Part I. Friedel and mott limits , 1989 .

[42]  F. Nabarro.  The Peierls stress for a wide dislocation , 1989 .

[43]  M. Z. Butt.  Correlation between temperature dependence of critical resolved shear stress and nature of solute distribution in aluminium-magnesium alloys , 1988 .

[44]  M. Z. Butt,et al.  Effect of short‐range order on the temperature dependence of plastic flow in α‐brasses , 1988 .

[45]  J. Jonas,et al.  Strength of metals and alloys , 1985 .

[46]  C. Schwink,et al.  On the concentration dependence of stress equivalence in solid solution hardening , 1980 .

[47]  L. Rémy.  Kinetics of f.c.c. deformation twinning and its relationship to stress-strain behaviour , 1978 .

[48]  R. Labusch.  Statistical theory of dislocation configurations in a random array of point obstacles , 1977 .

[49]  C. Schwink,et al.  Investigations of the yield region of concentrated CuGe and CuZn single crystals—I. Critical resolved shear stress, slip line formation and the true strain rate , 1977 .

[50]  L. Remy,et al.  Twinning and strain-induced f.c.c. → h.c.p. transformation on the mechanical properties of CoNiCrMo alloys , 1976 .

[51]  H. Ledbetter,et al.  Elastic Properties of Metals and Alloys, I. Iron, Nickel, and Iron-Nickel Alloys , 1973 .

[52]  D. Weiner.  Mechanical twinning in Cu single crystals , 1972 .

[53]  R. Labusch,et al.  Statistische theorien der mischkristallhärtung , 1972 .

[54]  K. Kamada,et al.  The Anomalies in Temperature Dependence of the Yield Stress of Cu Base Solid Solutions , 1971 .

[55]  R. Labusch.  A Statistical Theory of Solid Solution Hardening , 1970 .

[56]  A. J. McEvily,et al.  Fracture of Structural Materials , 1967 .

[57]  U. F. Kocks.  A statistical theory of flow stress and work-hardening , 1966 .

[58]  H. W. King.  Quantitative size-factors for metallic solid solutions , 1966 .

[59]  G. Thomas,et al.  MECHANICAL TWINNING IN NICKEL , 1963 .

[60]  R. Fleischer,et al.  Substitutional solution hardening , 1963 .

[61]  M. M. Hutchison.  The temperature dependence of the yield stress of polycrystalline iron , 1963 .

[62]  S. Shtrikman,et al.  A variational approach to the theory of the elastic behaviour of polycrystals , 1962 .

[63]  P. Feltham,et al.  Yielding and work-hardening in alpha-brasses , 1960 .

[64]  G. Schoeck,et al.  The flow stress of iron and its dependence on impurities , 1959 .

[65]  N. Petch,et al.  The ductile-brittle transition in the fracture of α-iron: II , 1958 .

[66]  R. M. Broudy,et al.  Dislocations and Mechanical Properties of Crystals. , 1958 .

[67]  A. Cochardt,et al.  Interaction between dislocations and interstitial atoms in body-centered cubic metals , 1955 .

[68]  J. D. Eshelby.  The elastic interaction of point defects , 1955 .

[69]  J. H. Bechtold.  Tensile properties of annealed tantalum at low temperatures , 1955 .

[70]  A. Cottrell,et al.  Yield points in brass crystals , 1953, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[71]  A. Seeger,et al.  Die aufspaltung von versetzungen in metallen dichtester kugelpackung , 1953 .

[72]  R. Brick,et al.  Behavior of Metals At Low Temperatures , 1953 .

[73]  A. Cottrell,et al.  Dislocations and plastic flow in crystals , 1953 .

[74]  H. Dietze.  Die Temperaturabhängigkeit der Versetzungsstruktur , 1952 .

[75]  A. Cottrell,et al.  Dislocation Theory of Yielding and Strain Ageing of Iron , 1949 .

[76]  N. Mott,et al.  An attempt to estimate the degree of precipitation hardening, with a simple model , 1940 .

[77]  R. Honeycombe,et al.  Plastic Deformation of Metals , 1932, Nature.