An Improved Algorithm for Optimal Load Shedding in Power Systems

A blackout is usually the result of load increasing beyond the transmission capacity of the power system. A collapsing system enters a contingency state before the blackout. This contingency state is characterized by a decline in the bus voltage magnitudes. To avoid blackouts, power systems may start shedding load when a contingency state occurs called under voltage load shedding (UVLS). The success of a UVLS scheme in arresting the contingency state depends on shedding the optimum amount of load at the optimum time and location. This paper proposes a hybrid algorithm based on genetic algorithms (GA) and particle swarm optimization (PSO). The proposed algorithm can be used to find the optimal amount of load shed for systems under stress (overloaded) in smart grids. The proposed algorithm uses the fast voltage stability index (FVSI) to determine the weak buses in the system and then calculates the optimal amount of load shed to recover a collapsing system. The performance analysis shows that the proposed algorithm can improve the voltage profile by 0.022 per units with up to 75% less load shedding and a convergence time that is 53% faster than GA.

[1]  Amir Abdollahi,et al.  An implementation of particle swarm optimization to evaluate optimal under-voltage load shedding in competitive electricity markets , 2013 .

[2]  A. M. Ranjbar,et al.  A global Particle Swarm-Based-Simulated Annealing Optimization technique for under-voltage load shedding problem , 2009, Appl. Soft Comput..

[3]  Innocent Kamwa,et al.  Preventive control approach for voltage stability improvement using voltage stability constrained optimal power flow based on static line voltage stability indices , 2014, IET Generation, Transmission & Distribution.

[4]  Stefan Arnborg,et al.  On undervoltage load shedding in power systems , 1997 .

[5]  William Holderbaum,et al.  A Method for Accurate Transmission Line Impedance Parameter Estimation , 2016, IEEE Transactions on Instrumentation and Measurement.

[6]  E. M. Davidson,et al.  Distribution Power Flow Management Utilizing an Online Optimal Power Flow Technique , 2012, IEEE Transactions on Power Systems.

[7]  W. F. Tinney,et al.  Some deficiencies in optimal power flow , 1988 .

[8]  Malcolm Irving,et al.  Supply restoration in distribution networks using a genetic algorithm , 2002 .

[9]  J. A. Laghari,et al.  Application of computational intelligence techniques for load shedding in power systems: A review , 2013 .

[10]  M. Wydra,et al.  Performance and Accuracy Investigation of the Two-Step Algorithm for Power System State and Line Temperature Estimation , 2018 .

[11]  I. Kamwa,et al.  Causes of the 2003 major grid blackouts in North America and Europe, and recommended means to improve system dynamic performance , 2005, IEEE Transactions on Power Systems.

[12]  C. W. Taylor Concepts of undervoltage load shedding for voltage stability , 1992 .

[13]  Yousef Alinejad-Beromi,et al.  A new integer-value modeling of optimal load shedding to prevent voltage instability , 2015 .

[14]  M. Pai,et al.  Power system steady-state stability and the load-flow Jacobian , 1990 .

[15]  M. Shahidehpour,et al.  Restructuring Choices for the Indian Power Sector , 2002, IEEE Power Engineering Review.

[16]  Mehrdad Tarafdar Hagh,et al.  Minimization of load shedding by sequential use of linear programming and particle swarm optimization , 2011 .