A experimental IEEE1588-BASED system for synchronized phasor measurement in electric subestation

The proposed technique synchronizes substation Event for Wide area measurement system (WAMS). Specifically for phasor meters with synchronism needs up to the microsecond range. This Intelligent Electronic Devices (IEDs) experimental PTP-BASED system comprise three main technologies: a PTP slave LM3S8962 microcontroller, a floating point DSP (TMS320C6713) and a six simultaneous channel analog to digital converter (ADP8365) for the three current and voltage signals. For Master task a NI PCI_1588 card and a Symmetricom's XLI IEEE1588 GrandMaster system for test. For the essays we have defined 3 types of experimental systems: for subestation measurements, for laboratory measurements and for high precision Synchronism test.

[1]  Arun G. Phadke,et al.  Synchronized Phasor Measurements and Their Applications , 2008 .

[2]  S.A.M. Ali,et al.  Development of a data acquisition and analysis system for a 10 kVA 3 phase switchable distribution transformer , 2008, 2008 3rd IEEE Conference on Industrial Electronics and Applications.

[3]  Lee Barford,et al.  Fourier Analysis From Networked Measurements Using Time Synchronization , 2007, IEEE Transactions on Instrumentation and Measurement.

[4]  Carlo Muscas,et al.  A PMU for the Measurement of Synchronized Harmonic Phasors in Three-Phase Distribution Networks , 2009, IEEE Transactions on Instrumentation and Measurement.

[5]  A. Moreno-Munoz,et al.  DSP algorithm for the real-time detection of power quality surge transients , 2009, 2009 IEEE International Conference on Mechatronics.

[6]  Dragan Obradovic,et al.  Synchronization Performance of the Precision Time Protocol in Industrial Automation Networks , 2009, IEEE Transactions on Instrumentation and Measurement.

[7]  Said Al-Sarawi,et al.  A synchronized event logger for substation topology processing , 2009, 2009 Australasian Universities Power Engineering Conference.

[8]  Hong Li,et al.  A new method of power system state estimation based on wide-area measurement system , 2009, 2009 4th IEEE Conference on Industrial Electronics and Applications.

[9]  X.W. Du,et al.  Mixed Digital/Analog Testing System for Relay Protection of Power System , 2007, 2007 2nd IEEE Conference on Industrial Electronics and Applications.

[10]  Carlo Muscas,et al.  A Flexible GPS-Based System for Synchronized Phasor Measurement in Electric Distribution Networks , 2006, IEEE Transactions on Instrumentation and Measurement.

[11]  Xiao Yin,et al.  Improving reliability of IEEE1588 in electric substation automation , 2008, 2008 IEEE International Symposium on Precision Clock Synchronization for Measurement, Control and Communication.

[12]  A. Flammini,et al.  Synchronization of the Probes of a Distributed Instrument for Real-Time Ethernet Networks , 2007, 2007 IEEE International Symposium on Precision Clock Synchronization for Measurement, Control and Communication.

[13]  Deog-Kyoon Jeong,et al.  A Practical Implementation of IEEE 1588-2008 Transparent Clock for Distributed Measurement and Control Systems , 2010, IEEE Transactions on Instrumentation and Measurement.

[14]  G.H. Yang,et al.  A Device for Power Quality Monitoring Based on ARM and DSP , 2006, 2006 1ST IEEE Conference on Industrial Electronics and Applications.

[15]  John C. Eidson,et al.  Measurement, Control, and Communication Using IEEE 1588 , 2006 .

[16]  Carlo Muscas,et al.  Application of IEEE 1588 to the measurement of synchrophasors in electric power systems , 2009, 2009 International Symposium on Precision Clock Synchronization for Measurement, Control and Communication.