Synthesis and charge-transporting properties of electron-deficient CN2–fluorene based D–A copolymers

In this paper, we report four D–A copolymers on the basis of a novel acceptor (A) unit of 9-fluorenylidene malononitrile (CN2–Fluorene) and four common donor (D) units of 9-alkylfluorene (P1), benzodithiophene (P2), bithiophene (P3), and dithienopyrrole (P4), respectively. These four copolymers were synthesized using Stille or Suzuki coupling and physicochemically characterized. Each of them exhibits a weak near IR absorption band extending down to 800 nm, due to weak intramolecular charge transfer (ICT) between the donor and CN2–Fluorene units. The LUMO energy levels of the copolymers (∼−3.70 eV) are determined mainly by the CN2–Fluorene unit, while the HOMO energy levels are finely tuned by the incorporation of donors, with the electrochemical bandgap decreasing from 2.04 eV for P1 to 1.56 eV for P2, 1.28 eV for P3, and 1.18 eV for P4. TD-DFT calculations on one repeating unit of the copolymer confirm the strong LUMO-determining ability of the CN2–Fluorene unit. The charge transport properties of the copolymers are investigated by fabricating OTFT devices with a bottom-contact configuration. The hole mobility of P3 is 1.43 × 10−3 cm2 V−1 s−1 under ambient conditions and that of P2 and P4 is 1.31 × 10−4 and 1.81 × 10−4 cm2 V−1 s−1, respectively.

[1]  J. Roncali Synthetic Principles for Bandgap Control in Linear pi-Conjugated Systems. , 1997, Chemical reviews.

[2]  Christoph J. Brabec,et al.  Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency , 2006 .

[3]  Wei You,et al.  Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency. , 2011, Angewandte Chemie.

[4]  Lei Zhang,et al.  All‐Solution‐Processed, High‐Performance n‐Channel Organic Transistors and Circuits: Toward Low‐Cost Ambient Electronics , 2011, Advanced materials.

[5]  Yong Cao,et al.  Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices. , 2009, Accounts of chemical research.

[6]  B. Ong,et al.  Electrochemical evaluation of electron acceptor materials , 1984 .

[7]  A. Heeger,et al.  Semiconducting and Metallic Polymers: The Fourth Generation of Polymeric Materials , 2001, Angewandte Chemie.

[8]  Yongfang Li,et al.  Synthesis and Characterization of a Copolymer Based on Thiazolothiazole and Dithienosilole for Polymer Solar Cells , 2011 .

[9]  I. Manners,et al.  Hierarchical Organometallic Materials: Self-Assembly of Organic–Organometallic Polyferrocenylsilane Block Polyelectrolyte–Surfactant Complexes in Bulk and in Thin Films , 2011 .

[10]  Donal D. C. Bradley,et al.  Electrochemical determination of the ionization potential and electron affinity of poly(9,9-dioctylfluorene) , 1998 .

[11]  Yongfang Li,et al.  Fullerene derivative acceptors for high performance polymer solar cells. , 2011, Physical chemistry chemical physics : PCCP.

[12]  K. Hashimoto,et al.  Synthesis and Photovoltaic Properties of Diketopyrrolopyrrole-Based Donor−Acceptor Copolymers , 2009 .

[13]  Jean-Luc Brédas,et al.  Charge transport in organic semiconductors. , 2007, Chemical reviews.

[14]  H. James,et al.  A Study of the Franck‐Condon Principle , 1936 .

[15]  Yingying Fu,et al.  Benzo[1,2-b:4,5-b']dithiophene-dioxopyrrolothiophen copolymers for high performance solar cells. , 2010, Chemical communications.

[16]  Bernard Kippelen,et al.  A high-mobility electron-transport polymer with broad absorption and its use in field-effect transistors and all-polymer solar cells. , 2007, Journal of the American Chemical Society.

[17]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[18]  Yang Yang,et al.  Regioregular copolymers of 3-alkoxythiophene and their photovoltaic application. , 2006, Journal of the American Chemical Society.

[19]  Luping Yu,et al.  Stille polycondensation for synthesis of functional materials. , 2011, Chemical reviews.

[20]  Sean J. Evenson,et al.  N-acyldithieno[3,2-b:2',3'-d]pyrroles: second generation dithieno[3,2-b:2',3'-d]pyrrole building blocks with stabilized energy levels. , 2010, Organic letters.

[21]  K. Hashimoto,et al.  Synthesis and Photovoltaic Properties of a Novel Low Band Gap Polymer Based on N-Substituted Dithieno[3,2-b:2',3'-d]pyrrole , 2008 .

[22]  Itaru Osaka,et al.  Transistor Paint: Environmentally Stable N‐alkyldithienopyrrole and Bithiazole‐Based Copolymer Thin‐Film Transistors Show Reproducible High Mobilities without Annealing , 2009 .

[23]  S. Jenekhe,et al.  Phthalimide-based polymers for high performance organic thin-film transistors. , 2009, Journal of the American Chemical Society.

[24]  S. Jenekhe,et al.  Benzobisthiazole-Based Donor–Acceptor Copolymer Semiconductors for Photovoltaic Cells and Highly Stable Field-Effect Transistors , 2011 .

[25]  Antonio Facchetti,et al.  π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications† , 2011 .

[26]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[27]  Xugang Guo,et al.  Conjugated polymers from naphthalene bisimide. , 2008, Organic letters.

[28]  A. Ajayaghosh Donor-acceptor type low band gap polymers: polysquaraines and related systems. , 2003, Chemical Society reviews.

[29]  Henning Sirringhaus,et al.  Enhanced Mobility of Poly(3-hexylthiophene) Transistors by Spin-Coating from High-Boiling-Point Solvents , 2004 .

[30]  M. Baumgarten,et al.  Thiadiazoloquinoxaline-acetylene containing polymers as semiconductors in ambipolar field effect transistors. , 2011, Journal of the American Chemical Society.

[31]  Yang Yang,et al.  Bandgap and Molecular Level Control of the Low-Bandgap Polymers Based on 3,6-Dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione toward Highly Efficient Polymer Solar Cells , 2009 .

[32]  David L. Carroll,et al.  High-efficiency photovoltaic devices based on annealed poly(3-hexylthiophene) and 1-(3-methoxycarbonyl)-propyl-1- phenyl-(6,6)C61 blends , 2005 .

[33]  Myung‐Gil Kim,et al.  Thieno[3,4-c]pyrrole-4,6-dione-based polymer semiconductors: toward high-performance, air-stable organic thin-film transistors. , 2011, Journal of the American Chemical Society.

[34]  Jorge M. Seminario,et al.  Recent developments and applications of modern density functional theory , 1996 .

[35]  S. Jenekhe,et al.  High‐mobility Ambipolar Transistors and High‐gain Inverters from a Donor–Acceptor Copolymer Semiconductor , 2010, Advanced materials.

[36]  O. Inganäs,et al.  An easily accessible isoindigo-based polymer for high-performance polymer solar cells. , 2011, Journal of the American Chemical Society.

[37]  E. W. Meijer,et al.  Two-dimensional charge transport in self-organized, high-mobility conjugated polymers , 1999, Nature.

[38]  R. J. Kline,et al.  Molecular packing of high-mobility diketo pyrrolo-pyrrole polymer semiconductors with branched alkyl side chains. , 2011, Journal of the American Chemical Society.

[39]  A. Facchetti,et al.  Air-stable, solution-processable n-channel and ambipolar semiconductors for thin-film transistors based on the indenofluorenebis(dicyanovinylene) core. , 2008, Journal of the American Chemical Society.

[40]  Hongbin Wu,et al.  Donor Polymers Containing Benzothiadiazole and Four Thiophene Rings in Their Repeating Units with Improved Photovoltaic Performance , 2009 .

[41]  H. Sirringhaus,et al.  Thieno[3,2-b]thiophene-diketopyrrolopyrrole-containing polymers for high-performance organic field-effect transistors and organic photovoltaic devices. , 2011, Journal of the American Chemical Society.

[42]  Toshihide Kamata,et al.  Influence of moisture on device characteristics of polythiophene-based field-effect transistors , 2004 .

[43]  Yongfang Li,et al.  Conjugated Polymer Photovoltaic Materials with Broad Absorption Band and High Charge Carrier Mobility , 2008 .

[44]  R. D. Mccullough,et al.  Benzobisthiazole‐Based Semiconducting Copolymers Showing Excellent Environmental Stability in High‐Humidity Air , 2010, Advanced materials.

[45]  Ye Tao,et al.  A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells. , 2010, Journal of the American Chemical Society.

[46]  L. D. Künne,et al.  Recent Developments and Applications of Modern Density Functional Theory , 1998 .