A High Fidelity Model Based Approach to Identify Dynamic Friction in Electromechanical Actuator Ballscrews using Motor Current

An enhanced model based approach to monitor friction within Electromechanical Actuator (EMA) ballscrews using motor current is presented. The research was motivated by a drive in the aerospace sector to implement EMAs for safety critical applications to achieve a More Electric Aircraft (MEA). Concerns in reliability and mitigating the single of point of failure (ballscrew jamming) have resulted in consideration of Prognostics and Health Monitoring (PHM) techniques to identify the onset of jamming using motor current. A higher fidelity model based approach is generated for a true representation of ballscrew degradation, whereby the motor is modelled using ‘dq axis’ transformation theory to include a better representation of the motor dynamics. The ballscrew kinematics are to include the contact mechanics of the main sources of friction through the Stribeck model. The simulations demonstrated feature extraction of the dynamic behaviour in the system using Iq current signals. These included peak starting current features during acceleration and transient friction variation. The simulated data were processed to analyse peak Iq currents and classified to represent three health states (Healthy, Degrading and Faulty) using k-Nearest Neighbour (k-NN) algorithm. A classification accuracy of ~74% was achieved. Keywords— Prognostics; Health Monitoring; Aerospace; Electromechanical Actuators; Ballscrew; Fault Classification

[1]  D.S. Bodden,et al.  Seeded Failure Testing and Analysis of an Electro-Mechanical Actuator , 2007, 2007 IEEE Aerospace Conference.

[2]  Glynn Atkinson,et al.  Safety-critical design of electromechanical actuation systems in commercial aircraft , 2011 .

[3]  Jixun Gao,et al.  Modeling and Simulation of Permanent Magnet Synchronous Motor Vector Control , 2014 .

[4]  Abhinav Saxena,et al.  A diagnostic approach for electro-mechanical actuators in aerospace systems , 2009, 2009 IEEE Aerospace conference.

[5]  F. P. Bowden,et al.  The Friction and Lubrication of Solids , 1964 .

[6]  Paolo Maggiore,et al.  Definition of parametric methods for fault analysis applied to an electromechanical servomechanism affected by multiple failures , 2014 .

[7]  Carl S. Byington,et al.  Experimental Data Collection and Modeling for Nominal and Fault Conditions on Electro-Mechanical Actuators , 2009 .

[8]  Edward Balaban,et al.  Fault detection and classification for flight control electromechanical actuators , 2016, 2016 IEEE Aerospace Conference.

[9]  Jen Fin Lin,et al.  Kinematic Analysis of the Ball Screw Mechanism Considering Variable Contact Angles and Elastic Deformations , 2003 .

[10]  Kevin P. Murphy,et al.  Machine learning - a probabilistic perspective , 2012, Adaptive computation and machine learning series.

[11]  Donald L. Simon,et al.  Sensor Needs for Control and Health Management of Intelligent Aircraft Engines , 2004 .

[12]  Xiangrong Xu,et al.  Multibody Dynamics Simulation of Balls Impact-Contact Mechanics in Ball Screw Mechanism , 2010, 2010 International Conference on Electrical and Control Engineering.

[13]  Abhinav Saxena,et al.  Experimental Validation of a Prognostic Health Management System for Electro-Mechanical Actuators , 2011 .

[14]  Carlos Canudas de Wit,et al.  A survey of models, analysis tools and compensation methods for the control of machines with friction , 1994, Autom..

[15]  Peter Vas,et al.  Electrical Machines and Drives: A Space-Vector Theory Approach , 1993 .

[16]  R. J. Frye,et al.  Advanced secondary power system for transport aircraft , 1985 .

[17]  S. Crary.  Two-Reaction Theory of Synchronous Machines , 1937, Transactions of the American Institute of Electrical Engineers.

[18]  Dong-Woo Cho,et al.  Estimating cutting force from rotating and stationary feed motor currents on a milling machine , 2002 .