Impact of the Polishing Suspension Concentration on Laser Damage of Classically Manufactured and Plasma Post-Processed Zinc Crown Glass Surfaces

The laser-induced damage threshold of optics is an issue of essential importance in high-power laser applications. However, the complex and partially interacting mechanisms as well as the underlying reasons for laser damage of glass surfaces are not yet fully understood. The aim of the present work is to contribute to a better understanding of such damage mechanisms by providing original results on the impact of classical glass surface machining on the laser-induced damage threshold. For this purpose, glass samples were prepared with well-defined process conditions in terms of the used lapping and polishing agents and suspensions. Further, the samples were post-processed by atmospheric pressure plasma for precision cleaning. The laser-induced damage threshold and surface contamination by residues from the manufacturing process were determined before and after plasma post-processing. It is shown that the polishing suspension concentration has a certain impact on the laser-induced damage threshold and surface contamination by residues from used working materials. The highest damage threshold of 15.2 J/cm2 is found for the lowest surface contamination by carbon which occurs in the case of the highest polishing suspension concentration. After plasma treatment for merely 60 s, this value was increased to 20.3 J/cm2 due to the removal of surface-adherent carbon. The results thus imply that the laser-induced damage threshold can notably be increased by first choosing appropriate process parameters during classical manufacturing and second plasma post-processing for surface finishing.

[1]  A study of intensity of tribochemical contact interaction between a polishing compound and sapphire in machining , 2008 .

[3]  L. Cook.  Chemical processes in glass polishing , 1990 .

[4]  Mark R. Kozlowski,et al.  Depth profiling of polishing-induced contamination on fused silica surfaces , 1998, Laser Damage.

[5]  C. R. Giuliano.  Laser‐induced damage in transparent dielectrics: ion beam polishing as a means of increasing surface damage thresholds , 1972 .

[6]  Christoph Gerhard,et al.  Polishing of optical media by dielectric barrier discharge inert gas plasma at atmospheric pressure , 2013 .

[7]  Laurent Gallais,et al.  LIDT improvement of multilayer coatings by accurate analysis of fabrication steps , 2005, SPIE Optical Systems Design.

[8]  Hongbo He,et al.  Laser-induced damage of multilayer dielectric gratings with picosecond laser pulses under vacuum and air , 2015 .

[9]  Evelyne Fargin,et al.  Laser induced damage of fused silica polished optics due to a droplet forming organic contaminant. , 2009, Applied optics.

[10]  K. Juškevičius,et al.  Argon plasma etching of fused silica substrates for manufacturing high laser damage resistance optical interference coatings , 2017 .

[11]  N. Sanner,et al.  Measurement of femtosecond laser-induced damage and ablation thresholds in dielectrics , 2009 .

[12]  Peter G. Schunemann,et al.  Increasing the Laser Induced Damage Threshold of Single Crystal ZnGeP2 , 2006 .

[13]  J Bude,et al.  High fluence laser damage precursors and their mitigation in fused silica. , 2014, Optics express.

[14]  Christoph Gerhard,et al.  Increase in Generation of Poly-Crystalline Silicon by Atmospheric Pressure Plasma-Assisted Excimer Laser Annealing , 2013 .

[15]  J. Golden,et al.  Optical properties of liquids for direct absorption solar thermal energy systems , 2009 .

[16]  Brent C. Stuart,et al.  Ultrashort-pulse laser machining of dielectric materials , 1999 .

[17]  Michael D. Feit,et al.  Influence of subsurface cracks on laser-induced surface damage , 2004, SPIE Laser Damage.

[18]  I. Langmuir.  THE ADSORPTION OF GASES ON PLANE SURFACES OF GLASS, MICA AND PLATINUM. , 1918 .

[19]  Laurent Gallais,et al.  Investigation of nanoprecursors threshold distribution in laser-damage testing , 2005 .

[20]  Jianda Shao,et al.  Influence of plasma treatment on laser-induced damage characters of HfO2 thin films at 355 nm. , 2009, Optics express.

[21]  Hironobu Sakata,et al.  Etude Ellipsométrique du Mécanisme Fondamental de Polissage du Verre , 1973 .

[22]  Christoph Gerhard.  Optics Manufacturing: Components and Systems , 2017 .

[23]  Jianda Shao,et al.  Employing oxygen-plasma posttreatment to improve the laser-induced damage threshold of ZrO2 films prepared by the electron-beam evaporation method. , 2004, Optics letters.

[24]  J. Néauport,et al.  Polishing-induced contamination of fused silica optics and laser induced damage density at 351 nm. , 2005, Optics express.

[25]  Takahisa Jitsuno,et al.  Enhancement of Surface-Damage Resistance by Removing Subsurface Damage in Fused Silica and Its Dependence on Wavelength , 2004 .

[26]  Luis Rodríguez-de Marcos,et al.  Self-consistent optical constants of SiC thin films. , 2011, Journal of the Optical Society of America. A, Optics, image science, and vision.

[27]  D Milam,et al.  Carbon dioxide laser polishing of fused silica surfaces for increased laser-damage resistance at 1064 nm. , 1982, Applied optics.

[29]  Myriam Zerrad,et al.  Laser-induced damage of hafnia coatings as a function of pulse duration in the femtosecond to nanosecond range. , 2011, Applied optics.

[30]  Christoph Gerhard,et al.  Low-temperature atmospheric pressure argon plasma treatment and hybrid laser-plasma ablation of barite crown and heavy flint glass. , 2012, Applied optics.

[31]  J. Liu.  Simple technique for measurements of pulsed Gaussian-beam spot sizes. , 1982, Optics letters.

[32]  M. Hori,et al.  Nonequilibrium atmospheric pressure plasma with ultrahigh electron density and high performance for glass surface cleaning , 2008 .

[33]  Bertrand Bertussi,et al.  Effect of polishing process on silica surface laser-induced damage threshold at 355 nm , 2004 .

[34]  Jin Huang,et al.  Advanced Mitigation Process (AMP) for Improving Laser Damage Threshold of Fused Silica Optics , 2016, Scientific Reports.

[35]  Xiaodong Yuan,et al.  Recovery of fused silica surface damage resistance by ion beam etching , 2008 .

[36]  Christoph Gerhard,et al.  Atmospheric Pressure Plasma Treatment of Fused Silica, Related Surface and Near-Surface Effects and Applications , 2013, Plasma Chemistry and Plasma Processing.

[37]  Shaobo He,et al.  Surface Contaminant Control Technologies to Improve Laser Damage Resistance of Optics , 2014 .

[38]  M. I. Smirnov,et al.  Modern sheet-glass cutting technologies , 2011 .

[39]  Jin Huang,et al.  Subsurface defects characterization and laser damage performance of fused silica optics during HF-etched process , 2014 .

[40]  L. L. Wong,et al.  HF‐Based Etching Processes for Improving Laser Damage Resistance of Fused Silica Optical Surfaces , 2011 .

[41]  Kai Wang,et al.  Order-of-magnitude multiphoton signal enhancement based on characterization of absorption spectra of immersion oils at the 1700-nm window. , 2017, Optics express.

[42]  Fritz Klocke,et al.  Material Removal Mechanisms in Lapping and Polishing , 2003 .

[43]  Ruiqing Xie,et al.  Characteristics of hydrolyzed layer and contamination on fused silica induced during polishing , 2014 .

[44]  D. Tasche,et al.  Increase in nanosecond laser-induced damage threshold of sapphire windows by means of direct dielectric barrier discharge plasma treatment. , 2017, Optics letters.

[45]  V. Belkin,et al.  Cleaning properties of atomic oxygen excited to metastable state 2s22p4(S10) , 2007 .

[46]  Mark R. Kozlowski,et al.  Subsurface damage and polishing compound affect the 355-nm laser damage threshold of fused silica surfaces , 1998, Laser Damage.

[47]  Jian Wang,et al.  The characteristics of optics polished with a polyurethane pad. , 2008, Optics express.

[48]  N. Bloembergen.  Role of cracks, pores, and absorbing inclusions on laser induced damage threshold at surfaces of transparent dielectrics. , 1973, Applied optics.

[49]  O. Uteza,et al.  Laser-induced damage threshold of sapphire in nanosecond, picosecond and femtosecond regimes , 2007 .

[50]  V. Puech,et al.  Oil removal from iron surfaces by atmospheric-pressure barrier discharges , 1999 .

[51]  A deformation and fracture mechanics approach to the scoring and breaking of glass , 1980 .

[52]  Takahisa Jitsuno,et al.  Enhancement of Surface-Damage Resistance by Removing Subsurface Damage in Fused Silica and Its Dependence on Wavelength , 2004, SPIE Laser Damage.

[53]  E. M. Logothetis,et al.  Laser-Induced Electron Emission from Solids: Many-Photon Photoelectric Effects and Thermionic Emission , 1969 .

[54]  Jérôme Néauport,et al.  Characterization of the polishing induced contamination of fused silica optics , 2016, Laser Damage.

[55]  M. J. Cumbo,et al.  Determination of near-surface forces in optical polishing using atomic force microscopy , 1994 .

[56]  Stephan Wieneke,et al.  Plasmagestützte Ionisations-spektroskopie (PGIS) zur Materialanalyse , 2011 .