Shielding Design for Current Sensor of Excitation System Based on 3-D FEM

In an excitation system of a certain type synchronous motor, current sensor for detection and protection often works under abnormal conditions. It leads to inability to play the role of the normal current detection, or even false tripping down the serious accidents. This failure is mainly generated by electromagnetic interference. Finite element analysis software is used to build the main circuit 3-D model of excitation system, by analyzing electromagnetic interference (EMI). Major source of interference is located. A method of installation shielding sleeve is designed, through theoretical calculations shield manufacturing materials are determined, and the effectiveness of this shielding design is clarified based on the existing finite element model. Through experiments the correctness based on the finite element method of such analysis is correct is verified.

[1]  Wei Liu,et al.  Intelligent Fault Diagnosis and Fault Tolerant Control on Nonlinear Excitation System , 2006, 2006 6th World Congress on Intelligent Control and Automation.

[2]  Sung-Ho Myung,et al.  Magnetic Shielding Performance of Thin Metal Sheets Near Power Cables , 2010, IEEE Transactions on Magnetics.

[3]  V. Prasad Kodali,et al.  Engineering Electromagnetic Compatibility: Principles, Measurements, Technologies, and Computer Models , 2001 .

[4]  Onofrio Losito,et al.  A 3D model of wide frequency metal foam shielding , 2009, 2009 International Symposium on Electromagnetic Compatibility - EMC Europe.

[5]  Peter Sergeant,et al.  Comparison of analytical, finite element and neural network methods to study magnetic shielding , 2010, Simul. Model. Pract. Theory.

[6]  K.R. Demarest,et al.  Engineering Electromagnetics , 1997, IEEE Electrical Insulation Magazine.

[7]  Asghar Keshtkar,et al.  Simulation of Shielding Effectiveness in Low Frequencies for Conductive Enclosure , 2009, 2009 Second International Conference on Computer and Electrical Engineering.

[8]  Tim Williams.  EMC for product designers , 1996 .

[9]  O. Perevertov.  Increase of precision of surface magnetic field measurements by magnetic shielding , 2009 .