Environmentally Friendly Coatings

[1]  M. Soucek,et al.  Modified soybean oil as a reactive diluent: Synthesis and characterization , 2014 .

[2]  P. Li,et al.  Synthesis and characterization of emulsion‐type curing agent of water‐borne epoxy resin , 2013 .

[3]  T. J. Nelson,et al.  Highly functional biobased polyols and their use in melamine–formaldehyde coatings , 2013, Journal of Coatings Technology and Research.

[4]  T. J. Nelson,et al.  Catalyzed crosslinking of highly functional biobased epoxy resins , 2013, Journal of Coatings Technology and Research.

[5]  Kaichang Li,et al.  Investigation of vegetable‐oil‐based coupling agents for kenaf‐fiber‐reinforced unsaturated polyester composites , 2013 .

[6]  O. Saravari,et al.  Preparation and properties of urethane alkyd based on a castor oil/jatropha oil mixture , 2013 .

[7]  Serkan Baş,et al.  Comparison of film properties for crosslinked core–shell latexes , 2013 .

[8]  G. Güçlü,et al.  Investigation of the effect of hydrolysis products of postconsumer polyethylene terephthalate bottles on the properties of alkyd resins , 2013 .

[9]  T. Schuman,et al.  Vegetable Oil-derived Epoxy Monomers and Polymer Blends: A Comparative Study with Review , 2013 .

[10]  M. Johansson,et al.  Alkyds for the 21st century , 2012 .

[11]  S. Cakic,et al.  Investigation of the curing kinetics of alkyd–melamine–epoxy resin system , 2012 .

[12]  Jingling Yan,et al.  Thiourethane thermoset coatings from bio‐based thiols , 2012 .

[13]  S. Gan,et al.  Novel approach to convert non-self drying palm stearin alkyds into environmental friendly UV curable resins , 2012 .

[14]  M. Soucek,et al.  Synthesis and properties of acrylate functionalized alkyds via a Diels–Alder reaction , 2012 .

[15]  A. Hofland.  Alkyd resins: From down and out to alive and kicking , 2012 .

[16]  M. Soucek,et al.  Tung based reactive diluents for alkyd systems: Film properties , 2012 .

[17]  M. Soucek,et al.  Factors influencing the stability and film properties of acrylic/alkyd water-reducible hybrid systems using a response surface technique , 2012 .

[18]  P. Chittavanich,et al.  A photo-curing study of a pigmented UV-curable alkyd , 2012 .

[19]  Uma Chatterjee,et al.  Route to Co-Acrylic Modified Alkyd Resins via a Controlled Polymerization Technique , 2012 .

[20]  M. Soucek,et al.  Synthesis of UV-curable tung oil and UV-curable tung oil based alkyd , 2012 .

[21]  S. Caillol,et al.  From Vegetable Oils to Polyurethanes: Synthetic Routes to Polyols and Main Industrial Products , 2012 .

[22]  K. Horie,et al.  Terminology of polymers and polymerization processes in dispersed systems (IUPAC Recommendations 2011) , 2011 .

[23]  D. Webster,et al.  Impact of structure and functionality of core polyol in highly functional biobased epoxy resins. , 2011, Macromolecular rapid communications.

[24]  Jie Yin,et al.  “Thiol-ene” photo-cured hybrid materials based on POSS and renewable vegetable oil , 2011 .

[25]  P. Sengupta,et al.  High biobased content epoxy-anhydride thermosets from epoxidized sucrose esters of Fatty acids. , 2011, Biomacromolecules.

[26]  Michael A. R. Meier,et al.  Plant oils: The perfect renewable resource for polymer science?! , 2011 .

[27]  P. Sengupta,et al.  Novel biobased epoxy compounds: epoxidized sucrose esters of fatty acids , 2011 .

[28]  S. Caillol,et al.  Synthesis of Biobased Polyols by Thiol−Ene Coupling from Vegetable Oils , 2011 .

[29]  M. Soucek,et al.  Synthesis of Tung‐Oil‐Based Reactive Diluents , 2010 .

[30]  Ying Xia,et al.  Vegetable oil-based polymeric materials: synthesis, properties, and applications , 2010 .

[31]  B. Chisholm,et al.  Soy-based UV-curable thiol–ene coatings , 2010 .

[32]  S. David,et al.  Studies on acrylated epoxydised triglyceride resin-co-butyl methacrylate towards the development of biodegradable pressure sensitive adhesives , 2009, Journal of materials science. Materials in medicine.

[33]  C. Stevens,et al.  Undecylenic acid: a valuable and physiologically active renewable building block from castor oil. , 2009, ChemSusChem.

[34]  J. W. Rawlins,et al.  Thiol–ene UV-curable coatings using vegetable oil macromonomers , 2009 .

[35]  M. Soucek,et al.  Control of functional site location for thermosetting latexes , 2009 .

[36]  Grigor B. Bantchev,et al.  Free radical addition of butanethiol to vegetable oil double bonds. , 2009, Journal of agricultural and food chemistry.

[37]  M. Soucek,et al.  A new approach to graft siloxanes to alkyds , 2009 .

[38]  M. R. Kessler,et al.  Fabrication and Properties of Vegetable‐Oil‐Based Glass Fiber Composites by Ring‐Opening Metathesis Polymerization , 2008 .

[39]  M. Soucek,et al.  Development of Hybrid Polymeric Materials Based on Thiol-Ene/Cationic Formulations , 2008 .

[40]  S. Stevenson,et al.  Dispersion of Gold Nanoparticles in UV-Cured, Thiol−Ene Films by Precomplexation of Gold−Thiol , 2008 .

[41]  Zoran S. Petrović,et al.  Polyurethanes from Vegetable Oils , 2008 .

[42]  G. Lu,et al.  Chemoselective catalytic conversion of glycerol as a biorenewable source to valuable commodity chemicals. , 2008, Chemical Society reviews.

[43]  G. Lu,et al.  Synthesis and Characterization of Waterborne Epoxy Curing Agent Modified by Silane , 2007 .

[44]  Jeffrey W Stansbury,et al.  Evaluation and Control of Thiol-ene/Thiol-epoxy Hybrid Networks. , 2007, Polymer.

[45]  S. Narine,et al.  Physical Properties of Polyurethanes Produced from Polyols from Seed Oils: I. Elastomers , 2007 .

[46]  A. Nikolaidis,et al.  Chemical Recycling of PET by Glycolysis: Polymerization and Characterization of the Dimethacrylated Glycolysate , 2006 .

[47]  Patit Paban Kundu,et al.  Addition polymers from natural oils- : A review , 2006 .

[48]  Yusuf Yagci,et al.  Polymers from triglyceride oils , 2006 .

[49]  M. Mccoy.  C0-Based Dry-Cleaning Chain Launched In Germany , 2006 .

[50]  M. Soucek,et al.  Effect of functional monomer on the stability and film properties of thermosetting core-shell latexes , 2005 .

[51]  D. Wicks,et al.  Autoxidizable urethane resins , 2005 .

[52]  Z. Zong,et al.  UV-curable organic–inorganic hybrid films based on epoxynorbornene linseed oils , 2005 .

[53]  M. Soucek,et al.  UV-curable cycloaliphatic epoxide based on modified linseed oil : Synthesis, characterization and kinetics , 2005 .

[54]  Chencheng Xue,et al.  Unusual inorganic phase formation in ultraviolet-curable organic-inorganic hybrid films , 2005 .

[55]  M. S. Farahat,et al.  New motivation for the depolymerization products derived from poly(ethylene terephthalate) (PET) waste: a review , 2005 .

[56]  L. Vaysse,et al.  Fatty acid composition and properties of Jatropha seed oil and its methyl ester. , 2005 .

[57]  M. Soucek,et al.  UV-Curable Organic-Inorganic Hybrid Film Coatings Based on Epoxidized Cyclohexene Derivatized Linseed Oil , 2004 .

[58]  Hamid Yeganeh,et al.  Synthesis and properties of isocyanate curable millable polyurethane elastomers based on castor oil as a renewable resource polyol , 2004 .

[59]  Jun Hu,et al.  Cationic photopolymerization of epoxynorbornane linseed oils: The effect of diluents , 2003 .

[60]  M. Olsson,et al.  A tribological study of a novel pre-treatment with linseed oil bonded to mercaptosilane treated aluminium , 2003 .

[61]  M. Soucek,et al.  Effect of introduction mode of hydroxyl functionality on morphology and film properties of cycloaliphatic diepoxide crosslinkable core-shell latex† , 2002 .

[62]  W. J. Simonsick,et al.  Synthesis and photopolymerization of norbornyl epoxidized linseed oil , 2002 .

[63]  A. Hasnat,et al.  Studies on ambient cured polyurethane modified epoxy coatings synthesized from a sustainable resource , 2002 .

[64]  Richard C. Larock,et al.  Thermophysical and mechanical properties of novel polymers prepared by the cationic copolymerization of fish oils, styrene and divinylbenzene , 2001 .

[65]  Richard P. Wool,et al.  Development and application of triglyceride‐based polymers and composites , 2001 .

[66]  S. Omel'chenko,et al.  Prospects of Investigation and Production of Waterborne Paintwork Materials , 2001 .

[67]  M. Soucek,et al.  Novel inorganic/organic hybrid materials based on blown soybean oil with sol-gel precursors , 2001 .

[68]  Jonathan P. Williams,et al.  Inorganic–organic hybrid coatings with mixed metal oxides , 2001 .

[69]  Feng-kui Li,et al.  Soybean oil–divinylbenzene thermosetting polymers: synthesis, structure, properties and their relationships , 2001 .

[70]  H. Jotischky.  Coatings, regulations and the environment reviewed , 2001 .

[71]  Feng-kui Li,et al.  New soybean oil‐styrene‐divinylbenzene thermosetting copolymers. III. Tensile stress–strain behavior , 2001 .

[72]  M. Nielen,et al.  Crosslink mechanisms of high-solids alkyd resins in the presence of reactive diluents , 2000 .

[73]  M. Alagar,et al.  Studies on thermal and morphological characteristics of E-glass/Kevlar 49 reinforced siliconized epoxy composites , 2000 .

[74]  I. Javni,et al.  Thermal stability of polyurethanes based on vegetable oils , 2000 .

[75]  Haibin Yu,et al.  Cationic ultraviolet curable coatings from castor oil , 2000 .

[76]  W. J. Muizebelt,et al.  Design and incorporation of reactive diluents for air-drying high solids alkyd paints , 1999 .

[77]  Haibin Yu,et al.  Cationic UV-cured coatings of epoxide-containing vegetable oils , 1999 .

[78]  R. Ballard,et al.  Effects of an Acid Catalyst on the Inorganic Domain of Inorganic−Organic Hybrid Materials , 1999 .

[79]  J. Beetsma.  Alkyd emulsion paints: properties, challenges and solutions , 1998 .

[80]  P. Gitu,et al.  Synthesis of vernolamides containing tertiary amino groups from Vernonia galamensis oil and their biological activities. , 1998 .

[81]  J. Lindeboom.  Air-drying high solids alkyd pants for decorative coatings , 1998 .

[82]  J. Crivello,et al.  Synthesis and Photoinitiated Cationic Polymerization of Epoxidized Castor Oil and Its Derivatives , 1998 .

[83]  Keith D. Weiss,et al.  Paint and coatings : A mature industry in transition , 1997 .

[84]  J. Crivello,et al.  Novel Epoxynorbornane Monomers. 1. Synthesis and Characterization , 1996 .

[85]  G. O¨stberg,et al.  Influence of emulsifier on the formation of alkyd emulsions , 1995 .

[86]  S. Dirlikov,et al.  Epoxidized vegetable oils as reactive diluents I. Comparison of vernonia, epoxidized soybean and epoxidized linseed oils , 1994 .

[87]  Horst Hintze-Brüning.  Utilization of vegetable oils in coatings , 1992 .

[88]  E. Frankel,et al.  Rigid urethane foams from hydroxymethylated castor oil, safflower oil, oleic safflower oil, and polyol esters of castor acids , 1974 .

[89]  F. R. Earle.  Epoxy oils from plant seeds , 1970 .

[90]  W. M. Kraft.  Alkyds—Past, present and future? , 1962 .

[91]  A. Karim,et al.  Silicone-Alkyd Copolymers and Their Application to High-Temperature Surface Coatings. , 1960 .

[92]  R. Kienle,et al.  Alkyd Resins as Film-Forming Materials , 1929 .