Global Analysis of Tip Clearance Influence on Centrifugal Compressor Performance

In this paper a case study of a trans-sonic centrifugal compressor at various tip gap values is presented. At all clearance values, global parameters of efficiency and head coefficient were assessed for the rotor and the stage. All results were obtained through 3D CFD simulations carried out with the k-omega SST model. Results indicate that stage performance can easily be correlated with the tip gap size while rotor performances appear to be subject to more complex interactions. The work may be used to validate and extend the state of the art correlations and also to pave the way for more in-depth analysis into the phenomena occurring in centrifugal compressor flows.

[1]  M. V. Casey.  The Effects of Reynolds Number on the Efficiency of Centrifugal Compressor Stages , 1985 .

[2]  Active Control of Separating Boundary Layer , 2010 .

[3]  Dragan Valeriu.  Aerodynamic reconfiguration and multicriterial optimization of centrifugal compressors - a case study , 2014 .

[4]  Alexandru Dumitrache,et al.  Flow control of separating boundary layer on the Coanda surface , 2011 .

[5]  Gunther Brenner,et al.  Unsteady CFD simulations of a pump in part load conditions using scale-adaptive simulation , 2010 .

[6]  P. Spalart,et al.  On the sensitization of turbulence models to rotation and curvature , 1997 .

[7]  J. E. Donald Gauthier,et al.  Performance Prediction of Centrifugal Impellers Using a Two-Zone Model , 2008 .

[8]  C. Rodgers.  Specific speed and efficiency of centrifugal impellers , 1979 .

[9]  G. Bergeles,et al.  Notes on Numerical Fluid Mechanics and Multidisciplinary Design , 2012 .

[10]  Jin-Hyuk Kim,et al.  Design Optimization of a Centrifugal Fan with Splitter Blades , 2015 .

[11]  R. Amano,et al.  Empirical Design Considerations for Industrial Centrifugal Compressors , 2012 .

[12]  P. Spalart.  Reflections on RANS Modelling , 2010 .

[13]  Sterian Danaila,et al.  Preliminary Simulation of a 3D Turbine Stage with In Situ Combustion , 2015 .

[14]  F. Menter.  Two-equation eddy-viscosity turbulence models for engineering applications , 1994 .

[15]  Valeriu Vilag,et al.  Experimental Measurements of Pressure Losses in the Inter-Turbine Duct of a Gas Turbine , 2015 .

[16]  Wei Jiang,et al.  Dynamic centrifugal compressor model for system simulation , 2006 .

[17]  F. Menter,et al.  Ten Years of Industrial Experience with the SST Turbulence Model , 2003 .

[18]  Dumitrache Alexandru,et al.  Control of two‐dimensional turbulent wall jet on a coanda surface , 2011 .

[19]  Laszlo Fuchs,et al.  Investigation of the surge phenomena in a centrifugal compressor using large eddy simulation , 2013 .