Numerical and experimental investigation of the delamination in drilling of the carbon fiber-reinforced plastic composite

[1]  H. Park,et al.  Experimental and analytical investigation of the drilling forces of the carbon fiber reinforced plastics including thermal effects , 2020 .

[2]  Xinggang Jiang,et al.  Delamination formation, evaluation and suppression during drilling of composite laminates: A review , 2019, Composite Structures.

[3]  B. S. Shenoy,et al.  Review on carbon fiber reinforced polymer (CFRP) and their mechanical performance , 2019, Materials Today: Proceedings.

[4]  J. Ståhl,et al.  Hole-quality evaluation in drilling fiber-reinforced composites , 2018, Composite Structures.

[5]  Wing Kam Liu,et al.  A micro-scale cutting model for UD CFRP composites with thermo-mechanical coupling , 2017 .

[6]  N. Shetty,et al.  A review on finite element method for machining of composite materials , 2017 .

[7]  A. Kentli,et al.  Comparative assessment of support plates’ influences on delamination damage in micro-drilling of CFRP laminates , 2017 .

[8]  Liping Liu,et al.  The effect of support on multi-hole drilling for glass fiber-reinforced plastic composite materials , 2017 .

[9]  Sein Leung Soo,et al.  Modelling the orthogonal cutting of UD-CFRP composites: Development of a novel cohesive zone model , 2017 .

[10]  Chao Wang,et al.  Comparative studies on the effect of pilot drillings with application to high-speed drilling of carbon fibre reinforced plastic (CFRP) composites , 2017 .

[11]  Khaled Giasin,et al.  3D Finite Element Modelling of Cutting Forces in Drilling Fibre Metal Laminates and Experimental Hole Quality Analysis , 2017, Applied Composite Materials.

[12]  M. Wu,et al.  Carbon Fiber Composite Materials Finite Element Simulation Analysis of Cutting Force , 2016 .

[13]  Adem Çiçek,et al.  Prediction of cutting temperature in orthogonal machining of AISI 316L using artificial neural network , 2016, Appl. Soft Comput..

[14]  Demeng Che,et al.  Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review , 2014 .

[15]  J. López-Puente,et al.  Numerical prediction of delamination in CFRP drilling , 2014 .

[16]  Shuji Usui,et al.  International Conference on High Performance Cutting , HPC 2014 Finite Element Modeling of Carbon Fiber Composite Orthogonal Cutting and Drilling , 2014 .

[17]  A. Çiçek,et al.  ANN and multiple regression method-based modelling of cutting forces in orthogonal machining of AISI 316L stainless steel , 2014, Neural Computing and Applications.

[18]  Ozden Isbilir,et al.  Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites , 2013 .

[19]  V. Silberschmidt,et al.  A Finite Element Model of Ultrasonically Assisted Drilling in Carbon/Epoxy Composites , 2013 .

[20]  Adem Çiçek,et al.  Prediction of Damage Factor in end Milling of Glass Fibre Reinforced Plastic Composites Using Artificial Neural Network , 2013, Applied Composite Materials.

[21]  Vadim V. Silberschmidt,et al.  Finite element analysis of drilling in carbon fiber reinforced polymer composites , 2012 .

[22]  C. Santiuste,et al.  Delamination prediction in orthogonal machining of carbon long fiber-reinforced polymer composites , 2012 .

[23]  D. Guo,et al.  Prediction of the cutting forces generated in the drilling of carbon-fibre-reinforced plastic composites using a twist drill , 2012 .

[24]  Ozden Isbilir,et al.  Finite Element Analysis of Drilling of Carbon Fibre Reinforced Composites , 2012, Applied Composite Materials.

[25]  A. Abrão,et al.  Analysis of parametric influence on delamination in high-speed drilling of carbon fiber reinforced plastic composites , 2008 .

[26]  J. Paulo Davim,et al.  Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor , 2008 .

[27]  C. Navarro,et al.  Experimental and numerical analysis of normal and oblique ballistic impacts on thin carbon/epoxy woven laminates , 2008 .

[28]  Inderdeep Singh,et al.  Drilling of uni-directional glass fiber reinforced plastics: Experimental and finite element study , 2008 .

[29]  A. Abrão,et al.  The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composite , 2008 .

[30]  A. Abrão,et al.  A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates , 2007 .

[31]  António Torres Marques,et al.  Numerical simulation of the drilling process on carbon/epoxy composite laminates , 2006 .

[32]  E. Capello.  Workpiece damping and its effect on delamination damage in drilling thin composite laminates , 2004 .

[33]  J. Paulo Davim,et al.  Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up , 2004 .

[34]  Pedro Reis,et al.  Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments , 2003 .

[35]  Mofid Mahdi,et al.  A finite element model for the orthogonal cutting of fiber-reinforced composite materials , 2001 .

[36]  N. Ganesan,et al.  Analysis of machining of FRPs using FEM , 1998 .

[37]  R. DeVor,et al.  A Mechanistic Approach to Predicting the Cutting Forces in Drilling: With Application to Fiber-Reinforced Composite Materials , 1993 .