State-dependent distributed-delay model of orthogonal cutting

In this paper, we present a model of turning operations with state-dependent distributed time delay. We apply the theory of regenerative machine tool chatter and describe the dynamics of the tool-workpiece system during cutting by delay differential equations. We model the cutting force as the resultant of a force system distributed along the rake face of the tool, which results in a short distributed delay in the governing equation superimposed on the large regenerative delay. According to the literature on stress distribution along the rake face, the length of the chip–tool interface, where the distributed cutting force system is acting, is function of the chip thickness, which depends on the vibrations of the tool-workpiece system due to the regenerative effect. Therefore, the additional short delay is state dependent. It is shown that involving state-dependent delay in the model does not affect linear stability properties, but does affect the nonlinear dynamics of the cutting process. Namely, the sense of the Hopf bifurcation along the stability boundaries may turn from sub- to supercritical at certain spindle speed regions.

[1]  J. Sieber,et al.  DDE-BIFTOOL v. 3.1.1 Manual — Bifurcation analysis of delay differential equations , 2016 .

[2]  Zoltan Dombovari,et al.  The Effect of Helix Angle Variation on Milling Stability , 2012 .

[3]  G. Stépán,et al.  State-dependent delay in regenerative turning processes , 2006 .

[4]  W. Graham,et al.  Determination of rake face stress distribution in orthogonal machining , 1982 .

[5]  Gábor Stépán.  Delay, Nonlinear Oscillations and Shimmying Wheels , 1999 .

[6]  Wenzhang Huang,et al.  On the problem of linearization for state-dependent delay differential equations , 1996 .

[7]  H. Chandrasekaran,et al.  Photoelastic Analysis of Tool-Chip Interface Stresses , 1965 .

[8]  E. Usui,et al.  A Photoelastic Analysis of Machining Stresses , 1960 .

[9]  R. E. Wilson,et al.  Estimates of the bistable region in metal cutting , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[10]  Giovanni Samaey,et al.  DDE-BIFTOOL Manual - Bifurcation analysis of delay differential equations , 2014, 1406.7144.

[11]  V. Astakhov,et al.  MODELING OF THE CONTACT STRESS DISTRIBUTION AT THE TOOL-CHIP INTERFACE , 2005 .

[12]  Tamás Insperger,et al.  Stabilizability diagram for turning processes subjected to digital PD control , 2014 .

[13]  Shivakumar Raman,et al.  Observations of the tool–chip boundary conditions in turning of aluminum alloys , 2007 .

[14]  Guang Meng,et al.  Nonlinear motions of a flexible rotor with a drill bit: stick-slip and delay effects , 2013 .

[15]  Dirk Roose,et al.  Numerical bifurcation analysis of delay differential equations using DDE-BIFTOOL , 2002, TOMS.

[16]  Kui Liu,et al.  The effect of tool edge radius on the contact phenomenon of tool-based micromachining , 2008 .

[17]  David Hajdu,et al.  Demonstration of the sensitivity of the Smith predictor to parameter uncertainties using stability diagrams , 2016 .

[18]  Yusuf Altintas,et al.  Manufacturing Automation: Metal Cutting Mechanics, Machine Tool Vibrations, and CNC Design , 2000 .

[19]  Ferenc Hartung,et al.  On Differentiability of Solutions with Respect to Parameters in State-Dependent Delay Equations , 1997 .

[20]  R. D. Driver,et al.  A two-body problem of classical electrodynamics: the one-dimensional case☆ , 1963 .

[21]  Ferenc Hartung,et al.  Chapter 5 Functional Differential Equations with State-Dependent Delays: Theory and Applications , 2006 .

[22]  Ferenc Hartung,et al.  Linearized stability in functional differential equations with state-dependent delays , 2001 .

[23]  Ferenc Hartung,et al.  Linearized stability in periodic functional differential equations with state-dependent delays , 2005 .

[24]  Gábor Orosz,et al.  Delay effects in shimmy dynamics of wheels with stretched string-like tyres , 2009 .

[25]  B. Balachandran,et al.  State-Dependent Delay Influenced Drill-String Oscillations and Stability Analysis , 2014 .

[26]  Gábor Stépán,et al.  Criticality of Hopf bifurcation in state-dependent delay model of turning processes , 2008 .

[27]  Michael C. Mackey,et al.  Consumer memory and price fluctuations in commodity markets: An integrodifferential model , 1989 .

[28]  Gábor Stépán,et al.  Investigating multiscale phenomena in machining: the effect of cutting-force distribution along the tool’s rake face on process stability , 2015 .

[29]  G. Barrow,et al.  On the Stress Distribution Between the Chip and Tool During Metal Turning , 1989 .

[30]  S. Kato,et al.  Stress Distribution at the Interface Between Tool and Chip in Machining , 1972 .

[31]  A. Olbrot,et al.  Finite spectrum assignment problem for systems with delays , 1979 .

[32]  Bernd Tibken,et al.  Differential Equations with State-Dependent Delays , 2001 .

[33]  Gábor Orosz,et al.  Decomposing the dynamics of heterogeneous delayed networks with applications to connected vehicle systems. , 2013, Physical review. E, Statistical, nonlinear, and soft matter physics.

[34]  I. Yellowley,et al.  Stress distributions on the rake face during orthogonal machining , 1994 .

[35]  Tamás Insperger,et al.  On the Effect of Distributed Regenerative Delay on the Stability Lobe Diagrams of Milling Processes , 2015 .

[36]  Xiaoping Yang,et al.  A new stress-based model of friction behavior in machining and its significant impact on residual stresses computed by finite element method , 2002 .

[37]  Tamás Insperger,et al.  On the robust stabilizability of unstable systems with feedback delay by finite spectrum assignment , 2016 .

[38]  P. Wright,et al.  Stress analysis in machining with the use of sapphire tools , 1987, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[39]  Gábor Stépán,et al.  State dependent regenerative effect in milling processes , 2011 .

[40]  Sung-Lim Ko,et al.  Prediction of tool-chip contact length using a new slip-line solution for orthogonal cutting , 2003 .

[41]  Hal L. Smith,et al.  An introduction to delay differential equations with applications to the life sciences / Hal Smith , 2010 .

[42]  Emmanuel M Detournay,et al.  Multiple mode analysis of the self-excited vibrations of rotary drilling systems , 2009 .

[43]  Alain Molinari,et al.  Chip Flow and Scaling Laws in High Speed Metal Cutting , 2012 .

[44]  Y. Kuang.  Delay Differential Equations: With Applications in Population Dynamics , 2012 .