For quality verification, an X-ray inspection process is commonly being used for evaluating obscured and defective solder joints in surface-mount technologies, such as ball grid arrays and flip chips. Integrated circuits subjected to any form of radiation, i.e., ionizing or nonionizing, may incur some amount of damage depending on the absorbed dose. Though most X-ray inspections for high-quality imaging require ionizing dose amounts that are considered inconsequential for device failure or non-functionality, the degree of latent damage must be carefully considered. This paper discusses X-ray-induced vulnerabilities of high-density dynamic random access memory exposed to low ionizing radiation levels typical in X-ray inspection systems. We look at critical parameters and their sensitivity in relation to varying dose amounts of X-ray irradiation. In consideration of different methodologies of reducing radiation dose amounts and limiting device exposure, we propose a procedure for attenuating potentially harmful X-ray radiation levels while preserving quality images.
[1]
T. Hamamoto,et al.
On the retention time distribution of dynamic random access memory (DRAM)
,
1998
.
[2]
R. Blish,et al.
Filter optimization for X-ray inspection of surface-mounted ICs
,
2002
.
[3]
M. Moniwa,et al.
Statistical pn junction leakage model with trap level fluctuation for Tref (refresh time)-oriented DRAM design
,
1999,
International Electron Devices Meeting 1999. Technical Digest (Cat. No.99CH36318).
[4]
Chenming Hu,et al.
Impact of gate-induced drain leakage current on the tail distribution of DRAM data retention time
,
2000,
International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).
[5]
Considerations for minimizing radiation doses to components during X-ray inspection
,
2005
.