Numerical and experimental investigation of convective drying in unsaturated porous media with bound water

The heat and mass transfer in an unsaturated wet cylindrical porous bed packed with quartz particles was investigated theoretically for relatively low convective drying rates. Local thermodynamic equilibrium was assumed in the mathematical model describing the multi-phase flow in the unsaturated porous media using the energy and mass conservation equations to describe the heat and mass transfer during the drying. The drying model included convection and capillary transport of the free water, diffusion of bound water, and convection and diffusion of the gas. The numerical results indicated that the drying process could be divided into three periods, the temperature rise period, the constant drying rate period and the decreasing drying rate period. The numerical results agreed well with the experimental data verifying that the mathematical model can evaluate the drying performance of porous media for low drying rates. The effects of drying conditions such as the ambient temperature, the relative humidity, and the velocity of the drying air, on the drying process were evaluated by numerical solution.

[1]  M. Stanish The roles of bound water chemical potential and gas phase diffusion in moisture transport through wood , 1986, Wood Science and Technology.

[2]  Ian Turner,et al.  A 3-D version of TransPore: a comprehensive heat and mass transfer computational model for simulating the drying of porous media , 1999 .

[3]  Drying of a wet porous material , 1986 .

[4]  I. Turner,et al.  Convective drying of a consolidated slab of wet porous material including the sorption region , 1990 .

[5]  S. Whitaker,et al.  One- and Two-Equation Models for Transient Diffusion Processes in Two-Phase Systems , 1993 .

[6]  E. N. Sieder,et al.  Heat Transfer and Pressure Drop of Liquids in Tubes , 1936 .

[7]  M. Kaviany,et al.  Funicular and evaporative-front regimes in convective drying of granular beds , 1992 .

[8]  P. Perré,et al.  Detailed study of a model of heat and mass transfer during convective drying of porous media , 1988 .

[9]  I. Turner A two-dimensional orthotropic model for simulating wood drying processes , 1996 .

[10]  C. L. Tien,et al.  Non-Darcian Convection in Cylindrical Packed Beds , 1988 .

[11]  B. A. Olmstead,et al.  Heat and mass transfer in wood during drying , 1985 .

[12]  A. Luikov SYSTEMS OF DIFFERENTIAL EQUATIONS OF HEAT AND MASS TRANSFER IN CAPILLARY-POROUS BODIES (REVIEW) , 1975 .

[13]  R. Winterton,et al.  Technical notes: where did the Dittus and Boelter equation come from , 1998 .

[14]  Ian Turner,et al.  Convective drying of a consolidated slab of wet porous material , 1989 .

[15]  M. Kaviany,et al.  Funicular state in drying of a porous slab , 1987 .

[16]  S. Whitaker Simultaneous Heat, Mass, and Momentum Transfer in Porous Media: A Theory of Drying , 1977 .

[17]  T. S. Ravigururajan,et al.  Development and verification of general correlations for pressure drop and heat transfer in single-phase turbulent flow in enhanced tubes , 1996 .