Frictional effect of ultrasonic-vibration on upsetting.

The ultrasonic-vibration ring compression test and finite element analysis were performed on aluminum alloy specimens to explore the frictional effect of superimposing ultrasonic-vibration during upsetting. The extrapolated compression test was first adopted to obtain the frictionless material properties for finite element analysis. Experimental results of extrapolated compression test also indicate that ultrasonic-vibration can reduce the compressive force when friction is eliminated and can increase the temperatures of a material at the same time. The following results of the hot extrapolated compression test and the hot ring compression test reveal that increasing temperature by ultrasonic-vibration may reduce the flow stress and increase the interfacial friction. Finally, finite element analysis was conducted to derive the friction calibration curves and to evaluate the friction factor.

[1]  Osamu Miyazawa,et al.  An application of ultrasonic vibration to the deep drawing process , 1998 .

[2]  B. Langenecker.  Effects of Ultrasound on Deformation Characteristics of Metals , 1966, IEEE Transactions on Sonics and Ultrasonics.

[3]  Jung-Chung Hung,et al.  The influence of ultrasonic-vibration on hot upsetting of aluminum alloy. , 2005, Ultrasonics.

[4]  F. Blaha,et al.  Dehnung von Zink-Kristallen unter Ultraschalleinwirkung , 2004, Naturwissenschaften.

[5]  Shiro Kobayashi,et al.  Metal forming and the finite-element method , 1989 .

[6]  E. C. Larke,et al.  Resistance of copper and copper alloys to homogeneous deformation in compression , 1945 .

[7]  A. T. Male,et al.  A Method for the Determination of the Coefficient of Friction of Metals under Conditions of Bulk Plastic Deformation , 1964 .

[8]  Miss A.O. Penney.  (b) , 1974, The New Yale Book of Quotations.

[9]  Sutasn Thipprakmas,et al.  Simulation of ultrasonic-vibration drawing using the finite element method (FEM) , 2003 .

[10]  M. Murakawa,et al.  The utility of radially and ultrasonically vibrated dies in the wire drawing process , 2001 .

[11]  E. Lehfeldt.  Influence of Ultrasonic Vibration on Metallic Friction , 1966 .

[12]  K. Siegert,et al.  Influencing the Friction in Metal Forming Processes by Superimposing Ultrasonic Waves , 2001 .

[13]  Hasan Sofuoglu,et al.  On the measurement of friction coefficient utilizing the ring compression test , 1999 .

[14]  Shiro Kobayashi,et al.  Deformation Characteristics and Ductile Fracture of 1040 Steel in Simple Upsetting of Solid Cylinders and Rings , 1970 .

[15]  R. Pohlman,et al.  Influence of ultrasonic vibration on metallic friction , 1966 .