Remarks on experimental and theoretical investigations of buckling loads for laminated plated and shell structures

Abstract The present paper deals with the description of the stability loss and postbuckling for multilayered composite structures. Both, the experimental results and theoretical predictions are presented and discussed. The wide literature review is also pointed out considering the issue of both experimental and theoretical buckling analyses for composite rectangular plates and shells. A special attention is focused on the buckling and postbuckling behaviour od structures with cutouts and reinforcement.

[1]  Joakim Schön,et al.  Buckling behaviour and delamination growth in impacted composite specimens under fatigue load: an experimental study , 2001 .

[2]  W. Knauss,et al.  One dimensional modelling of failure in laminated plates by delamination buckling , 1981 .

[3]  S. Hwang,et al.  The delamination buckling of single-fibre system and interply hybrid composites , 1999 .

[4]  Abdel Magid Hamouda,et al.  An experimental investigation into crushing behaviour of filament-wound laminated cone-cone intersection composite shell , 2001 .

[5]  RETRACTED: Buckling behavior of the multiple delaminated composite plates under shear and axial compression , 2012 .

[6]  Günter Schmidt,et al.  Kinetische Stabilität elastischer Systeme , 1961 .

[7]  G. N. Labeas,et al.  Interaction of damage failure and post-buckling behaviour of composite plates with cut-outs by progressive damage modelling , 2008 .

[8]  Mark W. Hilburger,et al.  Effects of imperfections of the buckling response of composite shells , 2004 .

[9]  Ozden O. Ochoa,et al.  Finite Element Analysis of Composite Laminates , 1992 .

[10]  M. Lyly,et al.  On post-buckling analysis and experimental correlation of cylindrical composite shells with Reissner-Mindlin-Von Kármán type facet model , 2008 .

[11]  Carol Ann Featherston,et al.  Buckling of optimised flat composite plates under shear and in-plane bending , 2005 .

[12]  G. Simitses,et al.  Spring simulated delamination of axially-loaded flat laminates , 1991 .

[13]  J. Reddy.  Finite-element modeling of layered, anisotropic composite plates and shells: A review of recent research , 1981 .

[14]  M. Kabir,et al.  Experimental study on the fracture capacity and fatigue life reduction of the tensioned cracked plate due to the local buckling , 2017 .

[15]  D. Shu.  Buckling of multiple delaminated beams , 1998 .

[16]  Chiara Bisagni,et al.  Dynamic buckling of fiber composite shells under impulsive axial compression , 2005 .

[17]  J. B klachut.  Filament wound torispheres under external pressure , 1993 .

[18]  Carl T. Herakovich,et al.  Mechanics of Fibrous Composites , 1997 .

[19]  A. Stawiarski,et al.  Location of delaminations in curved laminated panels , 2015 .

[20]  Jan Błachut,et al.  Towards Optimum Carbon-Fibre-Reinforced Plastic End Closures , 1991 .

[21]  Haim Abramovich,et al.  Buckling analysis of composite panels , 2006 .

[22]  M. P. Kamat,et al.  Post-buckling response of isotropic and laminated composite square plates with circular holes , 1987 .

[23]  A. Muc.  Buckling Analysis of Laminated Ellipsoidal Shells Subjected to External Pressure , 1991 .

[24]  P. Callus,et al.  Experimental and numerical investigation of the tension and compression strength of un-notched and notched quasi-isotropic laminates , 2004 .

[25]  H. Meyer-Piening,et al.  On the influence of laminate stacking on buckling of composite cylindrical shells subjected to axial compression , 2002 .

[26]  Mark W. Hilburger,et al.  Progressive failure analyses of compression-loaded composite curved panels with and without cutouts , 2004 .

[27]  A. Stawiarski,et al.  Identification of damages in composite multilayered cylindrical panels with delaminations , 2012 .

[28]  R. C. Tennyson,et al.  Buckling of laminated composite cylinders: a review , 1975 .

[29]  G. Verchery,et al.  Experimental study of the buckling of laminated composite columns and plates , 1975 .

[30]  Dirk Vandepitte,et al.  A new damage model for composite laminates , 2012 .

[31]  Rakesh K. Kapania,et al.  Recent advances in analysis of laminated beams and plates. Part I - Sheareffects and buckling. , 1989 .

[32]  B. Achour,et al.  Buckling analysis of laminated composite plates [(θ/−θ)] containing an elliptical notch , 2013 .

[33]  James H. Starnes,et al.  Effect of a circular hole on the buckling of cylindrical shells loaded by axial compression. , 1972 .

[34]  Aleksander Muc,et al.  Optimal Design of Smart Laminated Composite Structures , 2010 .

[35]  Richard Degenhardt,et al.  Investigations on imperfection sensitivity and deduction of improved knock-down factors for unstiffened CFRP cylindrical shells , 2010 .

[36]  I. Chirică,et al.  RETRACTED: Buckling analysis of the composite plates with delaminations , 2011 .

[37]  R. Velmurugan,et al.  Influence of fibre orientation and stacking sequence on petalling of glass/polyester composite cylindrical shells under axial compression , 2007 .

[38]  A. Muc.  Transverse shear effects in discrete optimization of laminated compressed cylindrical shells , 1997 .

[39]  L. Kollár,et al.  Stability Analysis of Long Composite Plates with Restrained Edges Subjected to Shear and Linearly Varying Loads , 2010 .

[40]  Dimitrios E. Manolakos,et al.  On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental , 2005 .

[41]  H. Ovesy,et al.  Post-buckling analysis of delaminated composite laminates with multiple through-the-width delaminations using a novel layerwise theory , 2015 .

[42]  Hossein Showkati,et al.  Buckling of thin-walled conical shells under uniform external pressure , 2008 .

[43]  W. P. P. Kumar,et al.  Nonlinear response of laminated cylindrical panels , 2001 .

[44]  Brian Falzon,et al.  Stiffener debonding mechanisms in post-buckled CFRP aerospace panels , 2005 .

[45]  A. Noor,et al.  Assessment of Computational Models for Multilayered Composite Shells , 1990 .

[46]  Cyril Douthe,et al.  Stability of curved panels under uniform axial compression , 2012 .

[47]  P. D. Mangalgiri,et al.  Compression Buckling Behavior of Laminated Composite Panels , 1997 .

[48]  Chiara Bisagni,et al.  Post-buckling and collapse experiments of stiffened composite cylindrical shells subjected to axial loading and torque , 2006 .

[49]  Miroslav Marjanović,et al.  Layerwise solution of free vibrations and buckling of laminated composite and sandwich plates with embedded delaminations , 2014 .

[50]  Huu-Tai Thai,et al.  A simple refined theory for bending, buckling, and vibration of thick plates resting on elastic foundation , 2013 .

[51]  M. Farrokhi,et al.  Buckling of cracked cylindrical panels under axially compressive and tensile loads , 2015 .

[52]  Jack C. Roberts,et al.  Buckling, collapse and failure analysis of FRP sandwich panels ☆ , 2002 .

[53]  Huu-Tai Thai,et al.  Analytical solutions of refined plate theory for bending, buckling and vibration analyses of thick plates , 2013 .

[54]  Ömer Sinan Şahin,et al.  Thermal buckling of hybrid angle-ply laminated composite plates with a hole , 2005 .

[55]  Hamid Reza Ovesy,et al.  Buckling and post-buckling behaviour of moderately thick plates using an exact finite strip , 2015 .

[56]  Erik Lund,et al.  Investigation of Failure Mechanisms in GFRP Sandwich Structures with face Sheet Wrinkle Defects used for Wind Turbine Blades , 2010 .

[57]  Chris D. Rudd,et al.  POST FIRST-PLY FAILURE MODELLING OF GLASS REINFORCED THERMOPLASTIC COMPOSITES , 2000 .

[58]  Shun-Fa Hwang,et al.  Buckling behavior of composite laminates with multiple delaminations under uniaxial compression , 2001 .

[59]  Javid Bayandor,et al.  Compression and post-buckling damage growth and collapse analysis of flat composite stiffened panels , 2008 .

[60]  G D Galletly,et al.  Externally Pressurized Hemispherical Fibre-Reinforced Plastic Shells , 1992 .

[61]  Seishi Yamada,et al.  Buckling analysis for design of pressurized cylindrical shell panels , 1997 .

[62]  Marios K. Chryssanthopoulos,et al.  Compression tests on anti-symmetric two-ply GFRP cylinders , 1999 .

[63]  A. Baker,et al.  Experimental and finite element analyses on the post-buckling behaviour of repaired composite panels , 1998 .

[64]  A. Muc,et al.  Buckling and post-buckling behaviour of laminated shallow spherical shells subjected to external pressure , 1992 .

[65]  Ahmed K. Noor,et al.  Thermomechanical postbuckling of multilayered composite panels with cutouts , 1995 .

[66]  A. Muc,et al.  Limit load carrying capacity for spherical laminated shells under external pressure , 1993 .

[67]  G. Kardomateas,et al.  Buckling and Postbuckling of Delaminated Composites Under Compressive Loads Including Transverse Shear Effects , 1988 .

[68]  Johann Arbocz,et al.  Computerized buckling analysis of shells , 1985 .

[69]  Chul-Jin Moon,et al.  Buckling of filament-wound composite cylinders subjected to hydrostatic pressure for underwater vehicle applications , 2010 .

[70]  Hui‐Shen Shen.  Postbuckling of FGM cylindrical panels resting on elastic foundations subjected to lateral pressure under heat conduction , 2014 .

[71]  Mustafa Şahin,et al.  Buckling behavior and compressive failure of composite laminates containing multiple large delaminations , 2009 .

[72]  Hsuan-Teh Hu,et al.  Buckling optimization of laminated cylindrical panels subjected to axial compressive load , 2007 .

[73]  Psang Dain Lin,et al.  Thermal buckling behaviour of composite laminated plates with a circular hole , 1991 .

[74]  Hamid Reza Mirdamadi,et al.  Nonlinear analysis of uni-lateral buckling for cylindrical panels on tensionless foundation , 2013 .

[75]  A. Muc.  Interlaminar failure and buckling of doubly-curved laminated composite shells , 1995 .

[76]  Raimund Rolfes,et al.  Robust design of composite cylindrical shells under axial compression — Simulation and validation , 2008 .

[77]  Hamid Reza Ovesy,et al.  Buckling analysis of delaminated composite plates using a novel layerwise theory , 2014 .

[78]  J.-F. Maire,et al.  Laminated composite structures subjected to compressive loading: A material and structural buckling analysis , 2007 .

[79]  Liyong Tong,et al.  Buckling analysis of laminated composite conical shells , 1993 .

[80]  J. C. Roberts,et al.  Experimental, numerical, and analytical results for buckling and post-buckling of orthotropic rectangular sandwich panels , 2001 .

[81]  A.M.C. Holmes,et al.  Buckling of shells with cutouts, experiment and analysis☆ , 1972 .

[82]  T. P. Kicher,et al.  A study of the buckling of laminated composite plates , 1971 .

[83]  Ilinca Stanciulescu,et al.  Nonlinear elastic buckling and postbuckling analysis of cylindrical panels , 2015 .

[84]  Toshio Nakamura,et al.  Effects of ply-arrangement on compressive failure of layered structures , 2000 .

[85]  G. J. Simitses,et al.  Delamination buckling of flat laminates , 1995 .

[86]  Ghazi Abu-Farsakh,et al.  Buckling of glass-reinforced plastic cylindrical shells under combined axial compression and external pressure , 1985 .

[87]  A. Spagnoli,et al.  Experimental response of glass-reinforced plastic cylinders under axial compression , 1998 .

[88]  Krzysztof Magnucki,et al.  Elastic buckling of an axially compressed cylindrical panel with three edges simply supported and one edge free , 2006 .

[90]  Bhanu Singh,et al.  Thermal post-buckling behaviour of laminated composite cylindrical/hyperboloid shallow shell panel using nonlinear finite element method , 2009 .

[91]  Su-Seng Pang,et al.  Buckling load analysis of grid stiffened composite cylinders , 2003 .

[92]  Johann Arbocz,et al.  Buckling experiments : experimental methods in buckling of thin-walled structures , 2000 .

[93]  J. N. Reddy,et al.  Buckling and vibration of laminated composite plates using various plate theories , 1989 .

[94]  G. Voyiadjis,et al.  Buckling strength prediction of CFRP cylindrical panels using finite element method , 1999 .

[95]  Optical Evaluation on Delamination Buckling of Composite Laminate with Impact Damage , 2014 .

[96]  Chiara Bisagni,et al.  An experimental investigation into the buckling and post-buckling of CFRP shells under combined axial and torsion loading , 2003 .

[97]  Jeong-Young Han,et al.  Buckling analysis and test of composite shells under hydrostatic pressure , 2008 .

[98]  G. Kardomateas.  Large deformation effects in the postbuckling behavior of compositeswith thin delaminations , 1989 .

[99]  David Kennedy,et al.  Global buckling of composite plates containing rectangular delaminations using exact stiffness analysis and smearing method , 2014 .

[100]  J. Wood,et al.  Stability characteristics of composite panels with various cutout geometries , 1996 .

[101]  Leif Asp,et al.  Delamination buckling and growth for delaminations at different depths in a slender composite panel , 2001 .

[102]  Norman F. Knight,et al.  An assessment of shell theories for buckling ofcircular cylindrical laminated composite panels loaded inaxial compression , 1999 .

[103]  Ya-Jung Lee,et al.  A study on the buckling behavior of an orthotropic square plate with a central circular hole , 1989 .

[104]  Ahmed K. Noor,et al.  Assessment of Shear Deformation Theories for Multilayered Composite Plates , 1989 .

[105]  J. Loughlan,et al.  The buckling response of carbon fibre composite panels with reinforced cut-outs , 1995 .

[106]  Y. Arman,et al.  Determination of critical delamination diameter of laminated composite plates under buckling loads , 2006 .

[107]  P. M. Mujumdar,et al.  Flexural vibrations of beams with delaminations , 1988 .

[108]  Carl T.F. Ross,et al.  The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure , 2001 .

[109]  Hamid Reza Ovesy,et al.  Dynamic buckling analysis of delaminated composite plates using semi-analytical finite strip method , 2015 .

[110]  A. Muc.  Buckling and Postbuckling Behaviour of Imperfect Laminated Shallow Spherical Shells Under External Pressure , 1991 .

[111]  Chiara Bisagni,et al.  Numerical analysis and experimental correlation of composite shell buckling and post-buckling , 2000 .

[112]  Evgeny V. Morozov.  Theoretical and experimental analysis of the deformability of filament wound composite shells under axial compressive loading , 2001 .

[113]  An improved model for the prediction of intra-cell buckling in CFRP sandwich panels under in-plane compressive loading , 2004 .

[114]  Mahmoud Shakeri,et al.  Multi-objective stacking sequence optimization of laminated cylindrical panels using a genetic algorithm and neural networks , 2007 .

[115]  A. Muc.  Design of blended/tapered multilayered structures subjected to buckling constraints , 2018 .

[116]  Ahmed K. Noor,et al.  Thermomechanical buckling of multilayered composite panels with cutouts , 1994 .

[117]  A. Muc,et al.  Optimal shapes of PZT actuators for laminated structures subjected to displacement or eigenfrequency constraints , 2012 .

[118]  J. H. Starnes,et al.  Buckling behavior of compression-loaded composite cylindrical shells with reinforced cutouts , 2005 .

[119]  Ali Dadrasi,et al.  Buckling analysis of laminated composite panel with elliptical cutout subject to axial compression , 2012 .

[120]  Tongxi Yu,et al.  The energy-absorbing capacity of grid-domed textile composites , 2000 .

[121]  Aleksander Muc,et al.  Transverse shear effects in stability problems of laminated shallow shells , 1989 .

[122]  M. Farshad,et al.  Buckling loads of CFRP composite cylinders under combined axial and torsion loading: experiments and computations , 2001 .

[123]  J. Whitcomb.  Mechanics of instability-related delamination growth , 1990 .

[124]  Suong V. Hoa,et al.  The study of tapered laminated composite structures: a review , 2000 .

[125]  Jin-Hwe Kweon,et al.  Postbuckling of composite cylinders under external hydrostatic pressure , 2008 .

[126]  Marios K. Chryssanthopoulos,et al.  Buckling of woven GFRP cylinders under concentric and eccentric compression , 1999 .

[127]  G. D. Galletly,et al.  CFRP DOMES SUBJECTED TO EXTERNAL PRESSURE , 1990 .

[128]  Shijun Guo,et al.  Stress concentration and buckling behaviour of shear loaded composite panels with reinforced cutouts , 2007 .

[129]  Sébastien Mistou,et al.  Global behaviour of a composite stiffened panel in buckling. Part 2: Experimental investigation , 2012 .

[130]  Carlo Poggi,et al.  Buckling strength of GFRP under-water vehicles , 2001 .

[131]  Hyonny Kim,et al.  A method for modeling the local and global buckling of delaminated composite plates , 1999 .

[132]  D N Moreton,et al.  Buckling of Slightly Flattened Domed Ends Reinforced Locally with Fibre-Reinforced Plastic , 1990 .

[133]  Gajbir Singh,et al.  Some simple solutions for buckling loads of thin and moderately thick cylindrical shells and panels made of laminated composite material , 1997 .

[134]  A. Muc,et al.  Experimental Investigations of Compressed Sandwich Composite/Honeycomb Cylindrical Shells , 2018, Applied Composite Materials.

[135]  Jianqiao Ye,et al.  Three-dimensional buckling analysis of laminated composite hollow cylinders and cylindrical panels , 1995 .

[136]  Teuku Meurah Indra Mahlia,et al.  Load–displacement behavior of glass fiber/epoxy composite plates with circular cut-outs subjected to compressive load , 2010 .

[137]  Stability analysis of composite laminate with and without rectangular cutout under biaxial loading , 2007 .

[138]  A. Muc.  Peculiarities in the Material Design of Buckling Resistance for Tensioned Laminated Composite Panels with Elliptical Cut-Outs , 2018, Materials.

[139]  Carl T.F. Ross,et al.  The buckling of a corrugated carbon fibre cylinder under external hydrostatic pressure , 2001 .

[140]  Guoxing Lu,et al.  Local buckling of composite laminar plates with various delaminated shapes , 2003 .

[141]  P. Soden,et al.  Recommendations for designers and researchers resulting from the world-wide failure exercise , 2004 .

[142]  L. Kollár.  Buckling of rectangular composite plates with restrained edges subjected to axial loads , 2014 .

[143]  Per-Lennart Larsson,et al.  On buckling of orthotropic compressed plates with circular holes , 1987 .

[144]  Ali Najafi,et al.  On the buckling behavior of cross-ply laminated composite plates due to circular/elliptical cutouts , 2006 .

[145]  A. Muc,et al.  Buckling of Externally Pressurized Composite Torispherical Domes , 1989 .

[146]  Development of a Finite-Element-Based Design Sensitivity Analysis for Buckling and Postbuckling of Composite Plates , 1995 .

[147]  The effect of stitching on FRP cylindrical shells under axial compression , 2004 .

[148]  S. C. Lin,et al.  Buckling failure analysis of random composite laminates subjected to random loads , 2000 .

[149]  Faruk Sen,et al.  Buckling analysis of laminated composite plates with an elliptical/circular cutout using FEM , 2010, Adv. Eng. Softw..

[150]  Luca Lanzi,et al.  A numerical and experimental investigation on composite stiffened panels into post-buckling , 2004 .

[151]  G. Ma,et al.  Experimental investigation of delamination buckling of stitched composite laminates , 2007 .

[152]  A. Baltacı,et al.  Buckling Characteristics of Symmetrically and Antisymmetrically Laminated Composite Plates with Central Cutout , 2007 .

[153]  Ahmed K. Noor,et al.  Assessment of computational models for multilayered anisotropic plates , 1990 .

[154]  Pawel Gotowicki,et al.  Experimental assessment of energy absorption capability of carbon-epoxy and glass-epoxy composites , 2009 .

[155]  A. Leissa.  A Review of Laminated Composite Plate Buckling , 1987 .

[156]  On the effect of shear stresses on the fibre failure behaviour in CFRP , 2009 .

[157]  John D. Whitcomb,et al.  Analysis of a Laminate with a Postbuckled Embedded Delamination, Including Contact Effects , 1992 .

[158]  De Xie,et al.  Postbuckling analysis with progressive damage modeling in tailored laminated plates and shells with a cutout , 2003 .

[159]  M. Biagi,et al.  Reliability-based knockdown factors for composite cylindrical shells under axial compression , 2008 .

[162]  Shiyong Sun,et al.  Failure prediction on advanced grid stiffened composite cylinder under axial compression , 2011 .

[163]  Compressive behavior of pultruded composite plates with circular holes , 2004 .

[164]  Chong Soo Lee,et al.  Failure of carbon/epoxy composite tubes under combined axial and torsional loading 2. Fracture morphology and failure mechanism , 1999 .

[165]  N. Gupta,et al.  Axial Compression of Empty and Foam Filled Composite Conical Shells , 1999 .

[166]  Abdel Magid Hamouda,et al.  Experimental quasi-static axial crushing of cone–tube–cone composite system , 2003 .

[167]  H. Ghasemnejad,et al.  Post-buckling failure in multi-delaminated composite wind turbine blade materials , 2011 .

[168]  E. Madenci,et al.  A complex potential-variational formulation for thermo-mechanical buckling analysis of flat laminates with an elliptic cutout , 2010 .

[169]  Emile S. Greenhalgh,et al.  The effect of defects on the performance of post-buckled CFRP stringer-stiffened panels , 2003 .

[170]  Aleksander Muc,et al.  Buckling enhancement of laminated composite structures partially covered by piezoelectric actuators , 2019, European Journal of Mechanics - A/Solids.

[171]  H. Ovesy,et al.  Postbuckling behavior of composite plates with through-the-width delaminations , 2008 .

[172]  C. Ross,et al.  The buckling of GRP hemi-ellipsoidal dome shells under external hydrostatic pressure , 2003 .

[173]  András Szekrényes,et al.  Progressive buckling of a simply supported delaminated orthotropic rectangular composite plate , 2015 .

[174]  M. Sarıkanat,et al.  Static stability of laminated composite circular plates with holes using shear deformation theory , 2007 .

[175]  Mark W. Hilburger,et al.  Effects of Imperfections on the Buckling Response of Compression-Loaded Composite Shells , 2000 .

[176]  Ashwini Kumar,et al.  Postbuckling response of square laminates with a central circular/elliptical cutout , 2004 .

[177]  Paul M. Weaver,et al.  Anisotropic effects in the compression buckling of laminated composite cylindrical shells , 2002 .