Graded PVD Mo-Si interlayer between Si coating and Mo-Si-B alloys: Investigation of oxidation behaviour

[1]  S. Seils,et al.  Microstructural and chemical constitution of the oxide scale formed on a pesting-resistant Mo-Si-Ti alloy , 2021, Corrosion Science.

[2]  S. Seils,et al.  On the chemical and microstructural requirements for the pesting-resistance of Mo–Si–Ti alloys , 2020 .

[3]  S. Obert,et al.  Effect of Water Vapor on the Oxidation Behavior of the Eutectic High‐Temperature Alloy Mo‐20Si‐52.8Ti , 2020, Advanced Engineering Materials.

[4]  S. Obert,et al.  Magnetron Sputtered Silicon Coatings as Oxidation Protection for Mo‐Based Alloys , 2020, Advanced Engineering Materials.

[5]  S. Obert,et al.  Characterisation of the oxidation and creep behaviour of novel Mo-Si-Ti alloys , 2020, Acta Materialia.

[6]  V. Leisner.  Neue Environmental Barrier Coatings für SiC/SiC-Faserverbundwerkstoffe durch PVD-Technologien , 2020 .

[7]  M. Engstler,et al.  Hafnia-doped silicon bond coats manufactured by PVD for SiC/SiC CMCs , 2020, Acta Materialia.

[8]  K. Baik,et al.  Growth Kinetics and Isothermal Oxidation Behavior of Aluminide Pack Coatings on a Multiphase Mo–Si–B Alloy , 2019, Oxidation of Metals.

[9]  Guojun Zhang,et al.  Characterization and oxidation resistance of B-modified Mo3Si coating on Mo substrate , 2019, Journal of Alloys and Compounds.

[10]  M. Scheffler,et al.  Tailored Oxidation Barrier Coatings for Mo-Hf-B and Mo-Zr-B Alloys , 2019, Materials.

[11]  A. Paul.  Diffusion Rates of Components in Metal-Silicides Depending on Atomic Number of Refractory Metal Component , 2019, Diffusion Foundations.

[12]  C. Sequeira.  High Temperature Corrosion , 2019 .

[13]  D. Schliephake,et al.  Constitution, oxidation and creep of eutectic and eutectoid Mo-Si-Ti alloys , 2019, Intermetallics.

[14]  R. Braun,et al.  PVD thermal barrier coating systems for Mo–Si–B alloys , 2018 .

[15]  J. Perepezko.  High temperature environmental resistant Mo-Si-B based coatings , 2018 .

[16]  M. Scheffler,et al.  Polymer Derived Oxidation Barrier Coatings for Mo-Si-B Alloys , 2017 .

[17]  D. Schliephake,et al.  Effect of Ti content and nitrogen on the high-temperature oxidation behavior of (Mo,Ti)5Si3 , 2017 .

[18]  S. Majumdar.  Isothermal and cyclic oxidation resistance of pack siliconized Mo–Si–B alloy , 2017 .

[19]  U. Schulz,et al.  Magnetron Sputtered Y2SiO5 Environmental Barrier Coatings For SIC/SIC CMCS , 2017 .

[20]  J. Perepezko,et al.  Environmentally Resistant Mo-Si-B-Based Coatings , 2017, Journal of Thermal Spray Technology.

[21]  D. Schliephake,et al.  Enhanced Oxidation Resistance of Mo–Si–B–Ti Alloys by Pack Cementation , 2017, Oxidation of Metals.

[22]  A. Heintz.  Thermodynamik der Mischungen und Mischphasengleichgewichte , 2017 .

[23]  H. Wadley,et al.  Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure , 2016 .

[24]  M. Eskandari.  Electron Diffraction , 2016 .

[25]  D. Schliephake,et al.  Creep Resistance and Oxidation Behavior of Novel Mo-Si-B-Ti Alloys , 2015 .

[26]  M. Heilmaier,et al.  Oxidation behavior of pack-cemented Si-B oxidation protection coatings for Mo-Si-B alloys at 1300°C , 2015 .

[27]  R. Braun,et al.  Magnetron-sputtered oxidation protection coatings for Mo–Si–B alloys , 2014 .

[28]  R. Braun,et al.  Oxidation behavior of magnetron sputtered double layer coatings containing molybdenum, silicon and boron , 2014 .

[29]  D. Schliephake,et al.  High-temperature oxidation behaviour of a single-phase (Mo,Ti)5Si3 (Mo--Si--Ti) alloy , 2012 .

[30]  R. Ritchie,et al.  Mo‐Si‐B Alloys for Ultrahigh‐Temperature Structural Applications , 2004, Advanced materials.

[31]  H. Okamoto.  Mo-Si (Molybdenum-Silicon) , 2011 .

[32]  J. Cochran,et al.  The microstructural engineering of Mo-Si-B alloys produced by reaction synthesis , 2010 .

[33]  J. Perepezko.  The Hotter the Engine, the Better , 2009, Science.

[34]  J. Colin,et al.  Oxidation performance of Mo3Si with Al additions , 2009 .

[35]  I. Samajdar,et al.  Relationship Between Pack Chemistry and Growth of Silicide Coatings on Mo-TZM Alloy , 2008 .

[36]  M. Kramer,et al.  Characterization and oxidation behavior of silicide coating on multiphase Mo–Si–B alloy , 2008 .

[37]  M. Böning,et al.  Mechanically alloyed Mo–Si–B alloys with a continuous α-Mo matrix and improved mechanical properties , 2008 .

[38]  H. Fujiwara,et al.  Thermodynamic properties of molybdenum silicides by molten electrolyte EMF measurements , 2007 .

[39]  R. Sakidja,et al.  Synthesis of oxidation resistant silicide coatings on Mo¿Si¿B alloys , 2005 .

[40]  R. Ritchie,et al.  Ambient- to elevated-temperature fracture and fatigue properties of Mo-Si-B alloys: Role of microstructure , 2005 .

[41]  N. Nomura,et al.  Microstructure and oxidation resistance of a plasma sprayed Mo–Si–B multiphase alloy coating , 2003 .

[42]  Gyeungho Kim,et al.  Simultaneous growth mechanism of intermediate silicides in MoSi2/Mo system , 2001 .

[43]  S. Deevi,et al.  Oxidation Behavior of Molybdenum Silicides and Their Composites , 2000 .

[44]  John R. Nicholls,et al.  Designing oxidation-resistant coatings , 2000 .

[45]  T. Sudarshan,et al.  Molybdenum silicide based materials and their properties , 1999 .

[46]  M. Kramer,et al.  Boron-doped molybdenum silicides for structural applications , 1999 .

[47]  C. Liu,et al.  Microstructure and mechanical properties of Mo–Mo3Si–Mo5SiB2 silicides , 1999 .

[48]  M. Dayananda,et al.  Diffusion structures in Mo vs. Si solid-solid diffusion couples , 1998 .

[49]  M. Kramer,et al.  Assessment of processing routes and strength of a 3-phase molybdenum boron silicide (Mo5Si3-Mo5SiB2-Mo3Si) , 1998 .

[50]  H. Grabke,et al.  Accelerated oxidation, internal oxidation, intergranular oxidation, and pesting of intermetallic compounds , 1995 .

[51]  E. Opila.  Oxidation Kinetics of Chemically Vapor‐Deposited Silicon Carbide in Wet Oxygen , 1994 .

[52]  C. Monty,et al.  18O diffusion through amorphous SiO2 and cristobalite , 1993 .

[53]  R. R. Cerchiara,et al.  Oxidation of MoSi2 and comparison with other silicide materials , 1992 .

[54]  K. Chopra,et al.  The effect of oxygen impurity on growth of molybdenum disilicide and its distribution during rapid thermal annealing of co-sputtered MoSix thin films , 1992 .

[55]  J. Thornton.  High Rate Thick Film Growth , 1977 .

[56]  John A. Thornton,et al.  Influence of apparatus geometry and deposition conditions on the structure and topography of thick sputtered coatings , 1974 .

[57]  R. Bartlett,et al.  Structure and Chemistry of Oxide Films Thermally Grown on Molybdenum Silicides , 1965 .