A comparison between three different methods of measuring knot parameters in picea abies

Both foresters and sawmillers are interested in the knot structure of trees; in particular, position and number of knots, knot diameter, knot length and dead knot border. For research purposes, it is possible today to carry out non‐destructive measurements using computer tomography (CT) and image analysis. The aim of this study was to measure knot parameters on Norway spruce (Picea abies (L.) Karst.) using a non‐destructive method developed for Scots pine (Pinus sylvestris L.), and to compare the results of this method with the results of two different destructive methods. In order to do this, two Norway spruce stems were scanned by CT. Then five logs from one stem were cut into flitches 20 mm thick and the defects on the sawn surfaces were scanned manually. The other stem was cut just above every whorl and then each knot was split through its centre and the knot parameters were measured manually. The study showed that the CT method compares well with the destructive methods. It is a reasonably fast, non‐...